FLuO rEsCEnt - In DustrIAL

FLUORESCENT - industrial38Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

FluorescentINDUSTRIAL,FLUORESCENT - industrialSTRIPS & CHANNELSSimkar is proud to introduce the mostinnovative and comprehensive IndustrialLighting offering available. Our productrange covers applications from basicstrips to super efficient and innovativeFluorescent Hi-bays combining the bestmaterials with energy efficient electronicsand light sources to provide not just asolution but the best solution for almostany environment.Adjust-a–Bay fluorescent bay lightercombines energy efficient T5 or T8 lampswith a unique, adjustable socket bracketthat positions the lamps to provide threedifferent beam patterns. The tool-lessadjusting knobs allow the fixture tobe used in hi-bay, mid-bay or low-bayapplications as needs change. Combinedwith reflect-a-bay Simkar has a solutionfor every fluorescent bay-lighting need.EN2 and EN3 provide superiorperformance in harsh environments.Latitude adds a decorative flair in areaswhere form and function are both afactor.Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 39

Adjust-a-Bay Three-in-One Fluorescent High BayFLUORESCENT - industrialThis energy-efficient new product has the flexibilityto provide lighting in industrial, educational, orretail applications. Adjust-a-Bay offers 3-wayuser adjustability to perform as a low bay, high bayor aisle lighter. Units are available with T5 or T8lamps in a four or six lamp configuration. Optionaluplight provides the ultimate in design flexibility.T5 Fixture: 55° C Ambient TemperatureT8 Fixture: 35° C Ambient TemperatureHousingFixture has a die formed heavy gauge steel ballastchannel with a high-gloss baked white enamelfinish over rust-inhibiting phosphate coat. Die-castaluminum ends have galvanized steel side rails. Ahinged ballast channel cover with captive hardwarecan be opened without tools. Fixture is shipped fullywired. Ample knockouts provided.Adjustable OpticsTool-free, adjustable optics assembly provides threeuser-selectable light distribution patterns: narrow foraisle lighting; medium for high bay; and wide forlow bay applications. Easily change the position ofthe lamp assembly within the reflectors utilizing twothumb screws located on each end cap.ElectricalFully wired for 120-277V, 50-60 Hz operation withthermally protected, automatic resetting, Class P,Sound rated A, programmed-start, electronic T5 HOballast. The 6 lamp unit contains 1-(2) lamp and1-(4) lamp T5 HO ballast. The 4 lamp unit contains1- (4) lamp T5 HO ballast as standard. Switch from6-4, 6-2, 6-0, 4-2, 4-0. Low voltage, high-2-lowcontrol on six lamp unit. System watts are 224W(ADJUST 454) and 360W (654). UL listed.ReflectorThe Adjust-a-Bay incorporates computer designed,faceted, extra wide and deep, highly reflectiveMIRO 4 reflectors which offer 95% reflectance.Sharp cut-off produces maximum usable lumens andminimizes glare. Slotting is available on all reflectorsfor cooler operation and uplight. Seven slots arelocated on each reflector. Each slot measures 1/2”wide x 5” long.Mounting OptionsA variety of mounting options are available:surface, pendant, chain hanger assembly, adjustablecable, mono-point hook or slide box. Please ordermounting accessories separately.AVAILABLEListed for Damp LocationsConsult Factory for CUL AvailabilityDimensionsFixture Fixture Fixture Approx.Length Width Height Ship Wt.432/454 48.4” 19” 4” 21 lbs.632/654 48.4” 29.7” 4” 28 lbs.Light Distribution Settings48.4 49.2The narrow setting provides uniform illumination for tall, vertical surfaces like racking and increased horizontalillumination for aisles below. The middle setting is excellent for mounting heights above 20 feet, while thewide setting provides glare-free illumination at lower mounting heights (below 20 feet). Use the multi-purposeAdjust-a-Bay to light an entire facility to simplify installation and maintenance.44016.029.7MIRO is a registered trademark of AlanodCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Adjust-a-Bay Three-in-One Fluorescent High BayAdjust-a-Bay Ordering InformationSeries # Lamps Lamp Type Aperture Options BallastADJUST 4628 = 28W 48” T554 = 54W 48” T5HO32 = 32W 48” T8Solid reflector is standardA = Aperture; uplight rangesfrom 7% to 12%*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory forNEMA Premium.ELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)Ballast Options Switching Voltage OptionsHBF = High Ballast FactorHT = High Temperature (Not available with HBF)PS = Program Start (Recommended for use with occupancy sensor)For 4 lamp units4L = (1) 4-lamp ballast(standard)2/2L = (2) 2-lamp ballastsFor 6 lamp unitsBlank = (1) 4-lamp ballastand (1) 2-lamp ballast(standard)2/3L = (2) 3-lamp ballastsUNV = 120-277VU34 = 347-480V347 = 347V480 = 480VB11 = Elec tron ic T8B11HP(x) = HPT8*B11VHO = T8 Very High OutputB12 = T5OS(x) = Occupancy Sensor(specify # of lamps controlled - 2, 4, 6 or 8)OSI(x) = Occupancy Sensor; factory-installed(specify # of lamps controlled - 2, 4, 6 or 8)OSDL(x) = Daylight Sensor(specify # of lamps controlled - 2, 4, 6 or 8)FB* = Fast blow fuseSB* = Slow blow fuseBP = Bulk Pack6’ Cord and PlugCPT(x)1 = 120V2 = 277V3 = 208V4 = 340V5 = 480VCP3 = Cord & Plug - 120V Straight Blade 5-15PFLUORESCENT - industrialMountingCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”PM(x) = Twin Pendant Mount - 2 white stem kits - specify length (24”, 36”, 48”, 60”, 72”)SN = Snapper Bracket - 1-3/4” for surface mounting or twist and lock onto T-Bar (order 2)HKSC = Hook & Chain Assembly - Monopoint mount to four point suspension. (Includes hook, chain, and mounting plate)CAB72 = Adjustable Cables - includes (4) 6-foot steel aircraft cables, toolless adjusters and mounting hardware.AccessoriesAWG4 = 4 Lamp Heavy-Duty Wire GuardAWG6 = 6 Lamp Heavy-Duty Wire GuardAWG4T = 4 Lamp Heavy-Duty Wire Guard - Top (Recommended for gym applications)AWG6T = 6 lamp heavy-duty wire guard - Top (Recommended for gym applications)ADJ4 = 4 Light acrylic Lens (Lift And Shift)ADJ6 = 6 Light acrylic Lens (Lift And Shift)WADJ4 = 4 Light acrylic Lens And Heavy Duty Wire Guard ComboWADJ6 = 6 Light acrylic Lens And Heavy Duty Wire Guard ComboCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com 41

Adjust-a-Bay Three-in-One Fluorescent High BayFLUORESCENT - industrialSee the light ... see the difference in your energy billsPut Light Where You Want ItThree user-selectable beam patterns for maximum illumination from a minimumnumber of fixtures.The Adjust-a-Bay offers the following uniquefeatures to provide non-stop energy savings andlower installation & maintenance costs:• Adjustable optics; three settings• Energy saving; electronicT5 HO and T8 systems• Exposed reflectors forcooler, cleaner operation• Extra deep and widereflectors for superiorlight controlSuperior IlluminationExtra deep and wide MIRO 4 reflectors punchlight downward for maximum horizontal andvertical illumination with less glare.Same Light at a Lower CostControl-friendly, energy efficient programmedstart ballast minimizes input watts and optimizeslamp life. Combine with optional motion sensor toincrease savings. Nothing saves like turning thelights off!Runs Cooler, Stays CleanerThermally efficient, fully exposed reflectorsmaximize lumen output at higher ambienttemperatures and repel dirt. Self-cleaningconvective airflow keeps the fixture cool.• Tool-less ballast accessCirculating convective airflow• Flexible mounting optionsEasy to AccessTool-less ballast access via captivethumbscrew for quick installation andservicing. Don’t waste valuable labor andequipment time fiddling with screws.NO SCREWSMIRO is a registered trademark of Alanod42Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Adjust-a-Bay Three-in-One Fluorescent High BayT5HO Programmed Start, Electronic BallastAdjust654HOB126 Light T5 H0Efficiency 98.4%Spacing criterion0° = 1.290° = .80°90°Efficiency 99.0%Spacing criterion0° = 1.390° = 1.10°90°Adjust654AH0B126 Light T5 H0 with uplightEfficiency 92.4%Spacing criterion0° = 1.290° = .90°90°11.6% uplightEfficiency 95.3%Spacing criterion0° = 1.290° = 1.20°90°8.6% uplightAdjust454H0B124 Light T5 H0Efficiency 98.4%Spacing criterion0° = 1.290° = .80°90°Efficiency 99.0%Spacing criterion0° = 1.290° = 1.10°90°Adjust454AH0B124 Light T5 H0 with uplightEfficiency 92.4%Spacing criterion0° = 1.290° = .90°90°11.6Efficiency 93.5%Spacing criterion0° = 1.290° = 1.20°90°8.6% uplightFLUORESCENT - industrialEfficiency 99.0%Spacing criterion0° = 1.290° = 1.80°90°Efficiency 94.0%Spacing criterion0° = 1.290° = .80°90°6.8% uplightEfficiency 99.4%Spacing criterion0° = 1.390° = 1.80°90°Efficiency 94.0%Spacing criterion0° = 1.290° = 1.80°90°6.8% uplightT8, Electronic BallastAdjust632B116 Light T8Adjust632AB116 Light T8 with uplightAdjust432B114 Light T8Adjust432AB114 Light T8 with uplightEfficiency 93.9%Spacing criterion0° = 1.290° = 1.00°90°Efficiency 94.3%Spacing criterion0° = 1.290° = 1.00°90°9.2% uplightEfficiency 93.9%Spacing criterion0° = 1.290° = 1.00°90°Efficiency 94.3%Spacing criterion0° = 1.290° = 1.30°90°9.2% uplightEfficiency 94.9%Spacing criterion0° = 1.290° = 1.40°90°Efficiency 94.7%Spacing criterion0° = 1.290° = 1.40°90°7.2% uplightEfficiency 94.9%Spacing criterion0° = 1.290° = 1.40°90°Efficiency 94.7%Spacing criterion0° = 1.290° = 1.40°90°7.2% uplightEfficiency 95.3%Spacing criterion0° = 1.290° = 2.00°90°Efficiency 95.4%Spacing criterion0° = 1.290° = 2.00°90°5.9% uplightEfficiency 95.3%Spacing criterion0° = 1.390° = 2.00°90°Efficiency 95.4%Spacing criterion0° = 1.290° = 2.10°90°5.9% uplightCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com 43

Reflect-A-Bay 4, 6, or 8 lamp T5/T8FLUORESCENT - industrialSimkar’s new Reflect-a-Bay is the perfectcomplement to our innovative Adjust-a-Bay seriesof product. Reflect-a-Bay incorporates the sameattention to quality and detail as its predecessor,offering both T5 and T8 in four, six, and eight lampconfigurations. Coupled with a wide array of optionsand accessories, Reflect-a-Bay is the perfectchoice for manufacturing, warehouse, retail orinstitutional applications, be they new installationsor retro-fits.AVAILABLEMore light. Lower costs. Easier to install.HousingDie formed heavy gauge steel housing with highglossbaked white enamel finish over rust inhibitingphosphate coat. Fixture is shipped fully wired. Ampleknockouts provided.ReflectorThe Reflect-A-Bay is available with an 85% specularreflector for narrow to medium distribution, or awhite reflector for wide distribution, perfect forlow bay applications.Mounting OptionsA variety of mounting options are available - pleasesee next page for details.• Uplighting available on all models• Save up to 20% in energy whenused in place of traditional HID• Instant-on• Choose from 7 mounting options,from a chain hanger to a centermount slidebox that’s great forHID retrofits• 4, 6, and 8 lamp versions• For use with T5 or T8 lampsElectricalFully wired for 120-277V, 60 Hz AC operation withETL-CBM, thermally protected, automatic resetting,Class P, sound rated A, programmed-start, electronicT5 HO or T8 ballast. High ballast factor T8 ballastsare also available. 8 lamp unit contains 2 - (4) lampballasts.The 6 lamp unit contains 1-(2) lamp and1-(4) lamp ballast. The 4 lamp unit contains 1- (4)lamp ballast as standard. UL listed.Choice of reflectors:• 85% specular with medium tonarrow distribution• White reflector for widedistribution – great for lowbayapplications44Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Reflect-A-Bay 4, 6, or 8 lamp T5/T8Reflect-A-Bay Series Ordering InformationSeries # Lamps Lamp Type Aperture Reflector Options Ballast Switching VoltageREF 46832 = F32T854 = F54T5HOA = ApertureS = SolidSR = Specular AluminumWR = White*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.ELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)NOTE: ELS2 AND ELS3 FOR T8 OPERATE ONE ORTWO LAMPS. ALL OTHERS OPERATE ONE LAMP ONLY.B11 = T8B11HP(x) = HPT8*B12 = T5 HOFor 4 lamp units4L = (1) 4-lamp ballast(standard)2/2L = (2) 2-lamp ballastsFor 6 lamp unitsBlank = (1) 4-lamp ballastand (1) 2-lamp ballast(standard)2/3L = (2) 3-lamp ballastsFor 8 lamp unitsBlank = (2) 4-lamp ballasts(standard)UNV = 120-277V347 = 347V480 = 480VFLUORESCENT - industrialOptions Mounting Accessories (Order Separately) Accessories (Order Separately)OS(x) = Occupancy Sensor(specify # of lamps controlled - 2, 4, 6 or 8)OSI(x) = Occupancy Sensor; factory-installed(specify # of lamps controlled - 2, 4, 6 or 8)OSDL(x) = Daylight Sensor(specify # of lamps controlled - 2, 4, 6 or 8)FB = Fast blow fuseSB = Slow blow fuse48.0BP = Bulk Pack6’ Cord and PlugCPT(x)1 = 120V2 = 277V3 = 208V4 = 240V48.05 = 480VCP3 = Cord & Plug - 120V Straight Blade 5-15PCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S”hooks for total drop 24”CS24 = S-hook Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks,(2) “S” hooks for total drop 24”PM(x) = Twin Pendant Mount - 2 white stems - specify length (24”, 36”,48”, 60”, 72”)HKSC = Hook & Chain Assembly - Monopoint mount to four pointsuspension. (Includes hook, chain, and mounting plate)CAB(x)72 = Adjustable Cables - includes 6-foot steel aircraft cables,toolless adjusters and mounting hardware. Specify “2” for 2cables & Y-hanger or “4” for 4 cables.SBH = Slide Box with hook - Level adjustable for mono-point hook mount.SBP(x) = Slide Box & Single Pendant Mount- Level adjustable for monopointpendant mount - specify length (24”, 36”,48”, 60”, 72”). Other lengths available.RWG(x) = Heavy Duty Wire GuardREF(x) = acrylic LensWREF(x) = acrylic Lens And Heavy Duty Wire Guard ComboFor above, please specify # of lamps (4, 6, or 8)Hook & ChainAssembly3.024.7548.0Reflect-A-Bay 8 lightMountingsOrdering CodeHKSC3.018.75Reflect-A-Bay 6 light3.0Chain HangerAssemblyOrdering CodeCA24Center Mount SlideBox w/Hook AssemblyOrdering CodeSBH12.75Reflect-A-Bay 4 light“S” Hook (4)Chain HangerAssemblyOrdering CodeCS24Center Mount Slide Boxw/ Pendant MountOrdering CodeSBP48.0AdjustableAircraftCablesOrdering CodeCAB72Twin Pendant MountOrdering CodePM2Call 800.523.36023.0• Fax 215.831.7703 • www.simkar.com 4512.75

MIRO ® Premium Specular IndustrialFLUORESCENT - industrialHousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat. 7/8” knock outs for easy in stal la tion.ReflectorSpecular reflector manufactured from MIRO 4aluminum in 4’ sections to maximize light outputand control beam spread. 95% reflectance.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingCeiling surface mount (HO and VHO units must besuspended at least 6” from ceiling for cooler op er a-tion and longer bal last life), spacing available withSnapper Bracket (SN), CA24 chain kit or stem mountin di vid u al or con tin u ous row. AC aligner clips availablefor continuous runs.The MIRO ® Industrial, designed to replaceconventional HID lighting in commercial, industrial,educational and retail applications, combines aperformance-boosting MIRO 4 aluminum reflector(95% reflectivity) with the proven energy efficienciesof T5HO or T8 linear fluorescent lamps. This providesincreased light levels, improved color rendition,and excellent uniformity while using up to 75% lessenergy. The MIRO Industrial, available in a choice ofsizes, lamp configurations, and mounting, is a costeffectivesolution for areas traditionally illuminatedusing HID fixtures.AVAILABLEDimensions11 1/2"3 7/8"MIE Premium Specular Industrial Ordering InformationSeries # Lamps Lamps Reflector Options OptionsMIE 12321 = Tandem, 2 lamps22 = Tandem, 4 lamps23 = Tandem, 6 lamps28 = 28W 48” T532 = 32W 48” T848 = 48” Slimline96 = 96” SlimlineHigh Output48 = 48” HO54 = 54W T5HO96 = 96” HOVery High Output48 = 48” VHO96 = 96” VHOSolid is standardA = Aperture 12% uplightBallast Switching VoltageHOB5 = High Output Electronic T12B11 = Electronic T8B11HP(x) = HPT8*HOB11 = High Output Electronic T8B12 = Electronic T5HO = High OutputVHO = Very High OutputFor 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsFor 3 and 4 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballast4L = (1) 4-lamp ballastUNV = 120-277V120 = 120V277 = 277VELS1 = Emergency Lighting(low lumens)ELS2 = Emergency Lighting(medium lumens)ELS3 = Emergency Lighting(high lumens)For 6 lamp tandem units2/3L = (2) 3-lamp ballasts2L4L = (1) 2-lamp and (1)4-lamp ballast*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.AccessoriesSN - Snapper BracketsCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks,(2) “S” hooks for total drop 24”CS24 = S-hook Chain Hanger Assembly - (2) 18” chains, (2) “V”hooks, (2) “S” hooks for total drop 24”HKSC - Hook & Chain Assembly (24” total drop; 4’ fixtures only)LG48 - 48” wire guardAC - Aligner Clip / JoinerCHJ - Connector JoinerMIRO is a registered trademark of Alanod46Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

IE IndustrialIE Industrial Fluorescent models comestandard with patented labor-saving pre-wiredflip-up socket bars.HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat. 7/8” knock outs for easy in stal la tion.ReflectorStrong, rigid, die-embossed solid white reflector in 4’sections, standard. Optional “A” ap ertures for 12%uplight.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingCeiling surface mount (HO and VHO units mustbe suspended at least 6” from ceiling for coolerop era tion and longer bal last life), spacing availablewith Snapper Bracket (SN), CA24 in kit or stemmount in di vid u al or con tin u ous row. AC aligner clipsavailable for continuous runs.FLUORESCENT - industrialAVAILABLEIE Industrial Ordering InformationSeries # Lamps Lamps Reflector OptionsIE 12321 = Tandem, 2 lamps22 = Tandem, 4 lamps23 = Tandem, 6 lamps28 = 28W 48” T532 = 32W 48” T848 = 48” Slimline96 = 96” SlimlineHigh Output48 = 48” HO54 = 54W T5HO96 = 96” HO (1 or 2 lamp only)Very High Output48 = 48” VHO (1 or 2 lamp only)96 = 96” VHO (1 or 2 lamp only)Solid is standardA = Aperture 12% uplightDimensions3 7/8"Options Ballast Switching VoltageELS1 = Emergency Lighting(low lumens)ELS2 = Emergency Lighting(medium lumens)ELS3 = Emergency Lighting(high lumens)B5 = Electronic T12HOB5 = High Output Electronic T12B11 = Electronic T8B11HP(x) = HPT8*HOB11 = High Output Electronic T8B12 = Electronic T5HO = High OutputVHO = Very High OutputFor 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsFor 3 and 4 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballast4L = (1) 4-lamp ballastUNV = 120-277V120 = 120V277 = 277V11 1/2"*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.For 6 lamp tandem units2/3L = (2) 3-lamp ballasts2L4L = (1) 2-lamp and (1)4-lamp ballastAccessoriesSN - Snapper BracketsCA24 - Chain Hanger Assembly (24” total drop)CS24 - “S” Hook (4) Chain Hanger Assembly (24” total drop)HKSC - Hook & Chain Assembly (24” total drop; 4’ fixtures only)LG48 - 48” wire guardAC - Aligner ClipCHJ - Housing JoinerCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com 47

IF Premium Turret IndustrialFLUORESCENT - industrialOp tion al reflector end, REHousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat. 7/8” knock outs for easy in stal la tion. Two-lampmodel has 6” on-center lamp spac ing.ReflectorHeavy gauge, rigid, die-em bossed reflector withtransverse beads, in 4’ sections; high-gloss whitereflector, or optional “A” apertures for 15% uplight.High reflectance specular aluminum insert (SR)available.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard (except Slimlineand HO models) unless otherwise specified. UL listeddamp location.MountingCeiling surface mount (HO and VHO units must besuspended at least 6” from ceiling for cooler op er a-tion and longer bal last life), spacing available withSnapper Bracket (SN), CA24 chain kit or stem mountin di vid u al or con tin u ous row.Simkar IF Premium Turret Industrial specificationgradefixtures feature spring-loaded lamp holders toprovide positive lamp contact and re ten tion.IF Premium Turret Industrial Ordering InformationSeries # Lamps Lamps Reflector OptionsAVAILABLEIF 23422 = Tandem, 4 lamps23 = Tandem, 6 lamps24 = Tandem, 8 lamps28 = 28W 48” T532 = 32W 48” T848 = 48” Slimline96 = 96” SlimlineHigh Output48 = 48” HO54 = 54W T5HO96 = 96” HOVery High Output48 = 48” VHO96 = 96” VHOA = Aperture, 15% uplightDimensionsOptions Ballast Switching Voltage4 1/4"6"12 3/4"2 Lamp6 1/4"SR = Specular ReflectorELS1 = Emergency Lighting(low lumens)ELS2 = Emergency Lighting(medium lumens)ELS3 = Emergency Lighting(high lumens)B5 = Electronic T12B11 = Electronic T8B11HP(x) = HPT8*HOB11 = High Output Electronic T8B12 = Electronic T5HO** = High OutputVHO** = Very High OutputFor 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsFor 3 and 4 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballast4L = (1) 4-lamp ballastFor 6 lamp tandem unitsBlank = single ballast2/3L = (2) 3-lamp ballasts2L/4L = (1) 2-lamp and (1) 4-lamp ballastUNV = 120-277V120 = 120V277 = 277V4 1/4"6 1/4"*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.** Must be spaced at least 6” from ceiling12 3/4"3 LampOptionsAccessories4 1/4"6 1/4"Cord and PlugCPT(x) (twist + lock)1= 120V2 = 277VCP3 = Cord & Plug - 120V Straight Blade 5-15PRE = Reflector endWG = Wire Guards (page 93)IF JOINER = For continuous run12 3/4"4 Lamp48Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

IDP Industrial Decorative with Perforated ShieldingIDP Industrial Decorative fixtures are idealfor spaces where a more refined look is desired.Finished end plates allow for attractive individualmounting.HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat. 7/8” knockouts provided for easy installation.Wired flip-up socket bars standard.ReflectorStrong, rigid, die-formed white reflector in 4’sections. Optional perforated reflector for ambientuplight available.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed.MountingSurface mount or pendant mount with aircraft cableor stem/canopies. Individual mounting only.FLUORESCENT - industrialAVAILABLEIDP Industrial Decorative Ordering InformationSeriesIDPLamps232 = (2) 32W 48” T8Ballast Voltage AccessoriesDimensionsB11 = Electronic T8B11HP(x) = HPT8*UNV =120-277VPM(x) = Twin Pendant Mount, 2 white stems - specify length in inches (24, 36, 48, 60, 72)CACC(xx) = Cable Kit, includes 2 cables, mounting hardware, white power cord and canopies; specifylength in inches (48 or 72)C = Single white canopy*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.1 1/8"5 1/4"3 3/4"2 3/8"14 1/4"Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 49

Latitude Louvered Industrial FluorescentFLUORESCENT - industrialThe Latitude series is the perfect choice foroffices, commercial or industrial applicationswhere a high end, high tech look andsuperior performance is required.AVAILABLEDimensions2"12.00"NEW3.875" 6.00"Introducing LatitudeRugged elegance best describes the Latitude seriesof fixtures. We begin with an industrial reflector ineither white (LAW) or specular finished (LAM) andadd a parabolic aluminum louver in your choice oftwo finishes: white or semi specular and complete itby offering T5 or T8 lamps in 4’ and 8’ lengths.The combination of the rugged industrial reflectorand control of the louvers produces a simply elegantfixture with the hardiness of an industrial fixturemarried with the soft, cut-off performance of highend,high-tech louvered luminaries. Latitude fixturesare available with a solid reflector or with aperturesfor an added element of uplighting to get the lookyou want with the performance you need.The ability to mount the Latitude series individuallyor in continuous rows add the versatility and comfortdesired in today’s fast moving retail, commercial andeducational environments.HousingDie–Formed heavy gauge steel with high glossbaked white enamel finish over rust-inhibitingphosphate coat. 7/8” knockouts for easyinstallation.ReflectorLAW: Strong, rigid, die-embossed solid whitepainted steel “S” reflector in 4’ sections is standard.Optional “A” reflector available with 12% uplight.LAM: Strong, rigid, die-embossed solid MIRO 4specular aluminum “S” reflector in 4’ sections isstandard. Optional “A” reflector available with 12%up-light.LouversLouvers provided in 4’ sections.S: Die-formed, parabolic louver made of semispecularaluminum.W: Die-formed, parabolic louver made of whitepainted aluminum.ElectricalFully wired for 120-277V, 50-60Hz operation withthermally protected, automatic resetting Class P,sound rated A ballast as standard unless otherwisespecified. UL listed damp location. Optional ballastsand configurations are available upon request.Mounting1.125”1.125"0.875" K.O. (4)Ceiling, surface or suspended mounting options areavailable for individual units or continuous rows.White end caps included (packaged separately).Contact factory for continuous row applications.48.00"1.00" 2.00"NOT TO SCALEMIRO is a registered trademark of Alanod50Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Latitude Louvered Industrial FluorescentLatitude Series Ordering InformationSeries Size Uplighting Louver # Lamps Lamp TypeLAW = Latitude WhiteLAM = Latitude with MIRO 4reflector4 = 4’8 = 8’A = ApertureS = Solid (none)S = Semi Specular parabolicW = White painted parabolicNote: 1 per 4’ Section1232T = 2 lamps, Tandem4T = 4 lamps, Tandem6T = 6 lamps, Tandem28T5 = F28 T532T8 = F32 T854T5H = F54 T5 HOEmergency Lighting Ballast Switching VoltageELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)E = ElectronicE(x) = Electronic HPT8*PS = Program Start (recommended for use with occupancy sensors;standard on T5)For 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsFor 3 and 4 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballast4L = (1) 4-lamp ballastU1 = 120-277U3 = 347-480V347 = 347V480 = 480VFLUORESCENT - industrialFor 6 lamp tandem units2/3L = (2) 3-lamp ballasts2L4L = (1) 2-lamp and (1) 4-lamp ballast*CEE listed HPT8 (32W only); specify (L)ow, (N)ormal, or (H)igh ballast factorOptions*Plug-in SystemsBallast wired to Black:PL1 BK - one circuit, two wiresPL2 BK - two circuits, three wiresPL3 BK - three circuits, four wiresBallast wired to Red:PL2 RD - two circuits, three wiresPL3 RD - three circuits, four wiresBallast wired to Blue:PL3 BL - three circuits, four wiresCord and Plug OptionsCPT(x) =, “x” = voltage12 = 120V L5-15P20 = 208V24 = 240V27 = 277V L7-15P34 = 347V48 = 480VCP3 = Cord & Plug - 120V Straight Blade 5-15PAccessoriesECW = End caps (white, set of 2)ECS = End caps (silver, set of 2)WO = Without endcapsAC = Alignment clipsFB = Fast blow fuseSB = Slow blow fuseBP = Bulk packCA24 = Chain hanger assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”CS24 = S-hook chain hanger assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”PM(x) = Twin pendant mount - 2 white stems - specify length (24”, 36”, 48”, 60”, 72”)HKSC = Hook & chain assembly - monopoint mount to four point suspension.(Includes hook, chain, and mounting plate)CAB(x)72 = Adjustable cables - includes 6-foot steel aircraft cables, toolless adjusters andmounting hardware. Specify “2” for 2 cables & Y-hanger or “4” for 4 cables.CACC(xx) = Cable Kit, includes 2 cables, mounting hardware, white power cord and canopies; specifylength in inches (48 or 72)Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 51

Latitude Contour Louvered Industrial FluorescentFLUORESCENT - industrialCHAIN HANGER HOLES/8” KO 3 PLACESN HANGER HOLES48.00”The Latitude series is the perfect choice foroffices, commercial or industrial applicationswhere a high end, high tech look andACCESS PLATEsuperior performance is required.96.00”AVAILABLENEWIntroducing Latitude ContourWith its distinctive curved blade and ruggedconstruction, Latitude Contour is the perfect fixturefor retail, commercial and educational applications.Unlike the standard Latitude with parabolic louvers,Contour has a die formed, post painted, one piecelouver with latches to secure the hinged louver tothe housing.Contour is available in 1,2,3, and 4 lamp versionsin 4’ and 2, 4, 6 and 8 lamp 8’ models for 28 and54 Watt T5 lamps and 32 Watt T8 lamps makingContour not only decorative but practical as well.Housing:Die-formed heavy gauge steel with high glosspost-painted baked white enamel finish over rustinhibiting phosphate coat. 7/8” knockouts for easyinstallation.1.5”ReflectorsStrong, rigid, die-embossed solid white post-paintedsteel “S” reflector in 4’ or 8’ sections is standard.Optional “A” reflector available with 12% up-light.LouverDie-formed, curved blade louver made of whitepainted steel with die-formed latches for easyopening and re-lamping. Louvers provided in 4’sections.Electrical:Fully wired for 120-277V, 50-60Hz operation withan thermally protected, automatic resetting class “P”electronic ballast. Other ballasts and configurationsare available upon request.MountingCeiling surface or suspended mounting options areavailable for individual units or continuous rows.3 PLACESDimensionsACCESS PLATE1.5”4’ Model48.00”CHAIN HANGER HOLES2.25”4.9”11.10”11.10”Cross Section(4' and 8' units)4.90”7/8” KO 3 PLACESACCESS PLATE1.5”52Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Latitude Contour Louvered Industrial FluorescentLatitude Contour Ordering InformationSeries Size Uplighting # Lamps Lamp TypeLAC 4 = 4’8 = 8’A = ApertureS = Solid(none)1= 1 lamp2 = 2 lamps3 = 3 lamps4 = 4 lamps2T = 2 lamps, Tandem4T = 4 lamps, Tandem6T = 6 lamps, Tandem8T = 8 lamps, Tandem28T5 = F28 T532T8 = F32 T854T5H = F54 T5 HOEmergency Lighting Ballast Switching VoltageELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (mediumlumens)ELS3 = Emergency Lighting (high lumens)E = ElectronicE(x) = Electronic HPT8*PS = Program Start (recommended for use with occupancy sensors;standard on T5)For 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsFor 3 and 4 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballast4L = (1) 4-lamp ballastU1 = 120-277U3 = 347-480V347 = 347V480 = 480VFLUORESCENT - industrial*CEE listed HPT8 (32W only); specify (L)ow, (N)ormal, or (H)igh ballast factorOptions*Plug-in SystemsBallast wired to Black:PL1 BK - one circuit, two wiresPL2 BK - two circuits, three wires11.10” PL3 BK - three circuits, four wiresBallast wired to Red:PL2 RD - two circuits, three wiresPL3 RD - three circuits, four wiresBallast wired to Blue:PL3 BL - three circuits, four wiresCord and Plug OptionsCPT(x) = Twist and lock, “x” = voltage12 = 120V 4.90” L5-15P20 = 208V24 = 240V27 = 277V L7-15P34 = 347V48 = 480VCP3 = Cord & Plug - 120V Straight Blade 5-15PCHAIN HANGER HOLESAccessories7/8” KO 3 PLACESFB = Fast blow fuseSB = Slow blow fuseBP = Bulk pack48.00”For 6 lamp tandem units2/3L = (2) 3-lamp ballasts2L4L = (1) 2-lamp and (1) 4-lamp ballastCA24 = Chain hanger assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”CS24 = S-hook chain hanger assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”PM(x) = Twin pendant mount - 2 white stems - specify length (24”, 36”, 48”, 60”, 72”)HKSC = Hook & chain assembly - monopoint mount to four point suspension.(Includes hook, chain, and mounting plate)CAB(x)72 = Adjustable cables - includes 6-foot steel aircraft cables, toolless adjusters andmounting hardware. Specify “2” for 2 cables ACCESS & Y-hanger PLATE or “4” for 4 cables.CACC(xx) = Cable Kit, includes 2 cables, mounting hardware, white power cord and canopies; specifylength in inches (48 or 72)ENTS = Tamperproof screwsENTSD = Tamperproof screwdriverTandem Model1.5”CHAIN HANGER HOLES96.00”11.10”4.90”7/8” KO 3 PLACESACCESS PLATE1.5”2.25”Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 534.9”

EN2 Enclosed gasketed weatherproofFLUORESCENT - industrial2’4’Features & Benefits8’ TandemNEW• Top rated UL fire resistant housing:UL 94, 5VA reinforced thermal setpolyester housing• IP65 and IP67 ratings• UL 746C rated f1 housing materialmeets outdoor UV and WaterImmersion requirements• Optional, simple, non-intrusive,external mounting hardwaresystem available• Securely attached, over-centerlatching system that are tamperproof ready• Rugged, impact resistant 100%certified high impact acrylic orpolycarbonate lenses• Superior sealing system producesa dust free, wash down fixture withan IP65 rating for 2’ units andIP67 for temporary immersion forthe 4’ and 8’ units.• NSF high pressure wash downapproved for splash zone areas.• Available with fluorescent T5,T5HO, T8, HPT8, or T8HO• Available in 2’, 4’ and 8’ lengthswith 1, 2, or 3 lamps systems plustandem configurations for the 8’unitsSimkar is proud to announce a family of demandingenvironment T5/T8 luminaires that will stand up tothe forces of wind, water, temperature extremes,dust, salt, and abuse.The EN2 series is an indoor/outdoor, corrosionproof, enclosed and gasketed fixture that does it all.Simkar’s weatherproof EN2 Series luminaires area low profile design and comes in 2’, 4’, and 8’lengths. The 2’ and 4’ units come in 4” and 6.8”widths and the 8” unit is 6.8” wide.You have choices of 1, 2, or 3 lamp versions to meetyour lighting needs.The housings are made of custom reinforced,thermal-set polyester that is corrosion resistant andwill withstand extreme abuse and neglect.The horizontally ribbed diffuser lenses wereengineered for superior strength, ease of cleaning,and optical uniformity. These tough lenses areavailable in injection molded, clear, UV stabilizedCertifications:UL, cUL wet location, 25° C ambientUL, cUL recognized componentsNSF Certified for high pressure wash down splash zone 4.56” areasIP65 certified; 2’ units: Dust-free, low pressure wash downIP67 certified; 4’ and 8’ units: Dust-free, temporary immersion for 30 minutes4.13”4.13”Ideal for demanding environments wherereliability and performance are paramount.polycarbonate (2’ and 4’ units) or 100% certifiedHigh Impact acrylic versions (4’ and 8’ units).The sealing flanges of the lenses were designed towork in conjunction with our custom formulatedfoam-in-place, non-reticulated polyurethane gasket.This gasket is a seamless gasket that chemicallyattaches to the housing and is robotically applied toensure consistency, accuracy, and reliability.As a result of this design system, we have been ableto achieve IP65 ratings for the 2’ units (dust freewith hose down) and IP67 ratings for the 4’ and 8’units (dust free with temporary submersion underwater for 30 minutes). The 2’, 4’, and 8’ units arealso certified for NSF high pressure wash downsplash zone areas.Our innovative latching and optional mountinghardware make installation and maintenance abreeze.VANDALAVAILABLERESISTANT7.33”MIRO is a registered trademark of Alanod54Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

EN2 Enclosed gasketed weatherproofHousingHousing to be 1-piece, custom reinforced thermalsetpolyester that is corrosion proof and willwithstand extreme abuse and neglect. Housingmaterial to be UL 5VA and f1 rated. Gasket tobe a seamless, custom formulated foam-in-place,urethane gasket, chemically attached to the housingand robotically applied to ensure consistency,accuracy, and reliability. All models are NSF SplashZone rated for high pressure wash down. 2’ unit tobe IP65 rated for dust-free and wash down; 4’ and8’ units to be IP67 rated for dust-free and waterfreeingress protection (temporary submersion for30 minutes).ElectricalT8 and HPT8 technology: Ballast to be electronic,Instant Start, fully wired with quick-disconnectdevice: Universal voltage 120 – 277VAC, 50/60Hz,Starting temperature 0°F (-18°C),< 15% THD, High-Power Factor, Thermallyprotected, Automatic resetting, Class P, Sound ratingA.T5 and T5HO technology: Ballast to be electronicProgram Start, fully wired with quick-disconnectdevice: Universal voltage 120 – 277VAC, 50/60Hz,Starting temperature 0°F (-18°C), < 15% and

FLUORESCENT - industrialFeatures & BenefitsNEWTop rated UL fire resistant housing: UL 94, 5VAreinforced thermal set polyester housingUL 746C rated f1 housing material meets outdoorUV and Water Immersion requirementsTwo external mounting system availableSecurely attached, over-center, stainless steellatching system that is tamper proof readyTool-free, hinged gear tray for ease of maintenanceand convenienceRugged, impact resistant lenses: non-yellowing,100% certified High Impact acrylicSuperior sealing system produces a dust proof, washdown fixture with an IP67ratingNSF high pressure wash down approved for Splashand Non-Food Zone Processing AreasAvailable with Fluorescent T5, T5HO, T8, or HPT8technologiesAvailable in a 4’ housing with 4 or 6 lampconfigurationsSimkar is proud to announce a family of demandingenvironment T5/T8 luminaires that will stand upto the nasty forces of wind, water, temperatureextremes, dust, salt, and abuse. Simkar’sweatherproof EN3 Series luminaires are a lowprofile design and are 14-1/2” wide and 52” longand are perfect for areas that need high light levelsor high mounting heights. You have choices of 4or 6 lamp versions to meet your lighting needs.The housings are made of custom reinforced,thermal-set polyester that is corrosion resistantand will withstand extreme abuse and neglect. Atough injection molded, clear, 100% certified HighImpact acrylic gives you a tough, non-yellowinglens that will exceed your expectations. An optionalCertifications:• UL, cUL wet location• UL, CSA recognized components• NSF Certified for high pressure wash downsplash zone processing areas• NEMA 4X• IP66/67 certified: Dust-free, high pressurewashdown/temporary immersion for 30minutesEN3 Enclosed gasketed weatherproofFinally, an Indoor/Outdoor, corrosion proof, enclosed andgasketed fixture that does it all.injection molded, UV stabilized polycarbonate lensis also available. The sealing flanges of the injectedmolded lenses were designed to work in conjunctionwith our custom formulated foam-in-place, closedcell polyurethane gasket. This gasket is a seamlessgasket that chemically attaches to the housingand is robotically applied to ensure consistency,accuracy, and reliability. As a result of this designsystem, we have been able to achieve a number ofimpressive certifications: IP67 rating for a dust freeluminaire capable of temporary submersion underwater for 30 minutes, NEMA 4X ideal for marineenvironments, and NSF high pressure wash down forsplash zone food processing areas.VANDALAVAILABLERESISTANT5.95”14.61”51.91”56Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

EN3 Enclosed gasketed weatherproofHousingCustom blend, UL 5VA and f1 rated fiberglassreinforced thermal-set polyesterSMC manufacturing process for strength, reliability,fit and finish.OpticsHigh reflectance, White reflector or minimum 92%high reflectance Specular aluminum reflectorsInjection molded, 100% certified High Impact acrylicLens; Optional injection molded, UV stabilizedpolycarbonate lens available.Lamp/Ballast/SocketsTechnologiesLamps: T5, T5HO, T8, or HPT8 (not included unlessordered)Ballasts: Electronic Instant Start T5, T8, and HPT8;Program Start T5HOUniversal voltages: 120-277 volt 50/60Hz or347-480V 50/60Hz; Straight voltages: 347V 60Hz;480V 60Hz; contact factory for other availablevoltages.All ballasts are electronic, thermally protected withauto-resetting, Class P, sound rated A, high powerfactor,

OV410 Enclosed and Gasketed StripliteFLUORESCENT - industrialOV410 Enclosed gasketed fixture is equippedwith a pressure-lock cam latch to tightly seal outvapor, mois ture and dust. Available in 4’ and 8’lengths as well as T8, T12, and high output.HousingHeavy-gauge steel with welded corners and compressible gasketing. KOs provided top and ends.ShieldingStandard with clear acrylic prismatic lens.OptionsPopular options include wet location label (suffix WL)for ceiling mount only (includes RTV silicone seal).ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified (except HO models). U.L. listed.MountingSurface or stem, individual or con tin u ous rows.OV410 Gasketed Striplite Ordering InformationAVAILABLESeries # Lamps Lamp Type ELS OptionsDimensionsOV410 2422 = Tandem, 4 lamps32 = 32W 48” T848 = 48” T12 HO96 = 96” T8/T12 Slimline / HOELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)8 1/4" 12 3/8"8 1/4" 12 3/8"Two LightBallast Switching Voltage Options2 3/4"B5 = Electronic T12 5 1/2"UNV = 120-277VB11 = Electronic T8120 = 120VB11HP(x) = HPT8*277 = 277VHO = High OutputFor 2 lamp unitsBlank = single 2-lamp ballast (standard)2/1L = (2) one-lamp ballastsFor 4 lamp unitsBlank = (2) 2-lamp ballasts4L = (1) 4-lamp ballast*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.WL = Wet Location (Ceiling mount only)FB* = Lay-in Fast-Blow FusingSB* = Lay-in Slow-Blow Fusing2 3/4"5 1/2"Four Light58Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

OV450 Wet Location Enclosed and GasketedOV450 is UL listed for wet locationsAVAILABLEVANDALRESISTANTHousingRigid, one-piece (ASTM D635-74) reinforcedpolyester fiberglass, accepted by NSF and USDA.Robotically applied gasketing – 98% compressionrecovery, no seams, no porosity – forms moistureseal to diffuser. Celcon latches standard; stainlesslatches optional (OV450). OV451 supplied with highstrengShieldingRigid, one-piece, self-ex tin guish ing (ASTM D635-74)re in forced polyester fiberglass, ac cept ed by NSFand USDA. Robotically applied gasketing – 98%compres sion recovery, no seams, no porosity – formsmoisture seal to D.R. acrylic diffuser or optionalpoly car bon ate. Thermoplastic latches standard;stainless latches optional.OptionsPoly car bon ate lens, stainless or tamperproof (SSTP)latches and wet location fittings.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified (except T8 HO models). UL listed wetlocation.MountingSurface, stem, chain kit; individual or continuousrows. CA24 Chain Hanger as sem bly with supportplate. Single canopy and stem set, hardware and 24”stem. WLF Fitting for use with water tight conduit,field installed. One each. See page 92.FLUORESCENT - industrialOV450 Wet Location Enclosed Striplite OrderingInformationHigh strength thermoplastic latches, standardSeries # Lamps Lamp TypeOV450 = 15% DR Crepe/Stipple LensOV451 = polycarbonate lens1221 = Tandem, two lamps22 = Tandem, four lamps32 = 32W 48” T848 = 48” T12 HO96 = 96” T8/T12 Slimline / HO54T5H = 54 watt T5HOStain less steel latches, specify SSTPDimensionsBACOptions Ballast Switching VoltageELS1 = Emergency Lighting(low lumens)ELS2 = Emergency Lighting(medium lumens)ELS3 = Emergency Lighting(high lumens)B5 = Electronic T12HOB5 = High Output Electronic T12B11 = Electronic T8B11HP(x) = HPT8*HOB11 = High Output Electronic T8For 2 lamp unitsBlank = single 2-lamp ballast (standard)2/1L = (2) one-lamp ballastsFor 4 lamp unitsBlank = (2) 2-lamp ballasts4L = (1) 4-lamp ballast*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.UNV = 120-277V120 = 120V277 = 270VDimensions A B C Length32W and 48” models 7 5/8” 4 1/2” 3” 49 13/16”96” and tandem models 7 5/8” 5 5/8” 3” 97 13/16”OptionsHAD = High-abuse 50% DR lens (OV450 only)SSTP = Stainless steel tamperproof latchAccessoriesCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S”hooks for total drop 24”CASP = Support plate for chain hanger assemblyPM(x) = Pendant Mount, white stem - specify length in inches (24, 36,48, 60, 72)C = Single white canopy (for use with pendant mount)TSD(x) = Tamper-proof screw driver (Specify quantity)Celcon ® is a registered trademark of Ticona Engineering PolymersCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com 59

OG Aluminum Enclosed LightFLUORESCENT - industrialOG’s narrow width and 4’ to 16’ length optionsmake it ideal for parking garages and other outdoorapplications where space is limited.HousingDie-formed, totally enclosed, fully gasketed,corrosion resistant aluminum hous ing. KOs pro vid ed.ShieldingExtruded clear wrap around acrylic snap-in diffuserthat will not discolor.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified (except HO models). U.L. damp locationlisted.MountingSurface mount or stem hang, individual orcontinuous rows with OG-CB adapt er.DimensionsOG Aluminum Enclosed Light Ordering Information4 1/8"6 11/16"Series # Lamps Lamps Ballast VoltageOG1 = Single21 = Tandem, 2 Lamps48 = 48”72 = 72”96 = 96”HO = High OutputHOB5 = High Output Electronic T12HOB11 = High Output Electronic T8UNV = 120-277V120 = 120V277 = 277VAccessoriesOG-CB = Continuous row adapterPM(x) - Twin Pendant Mount - 2 white stems - specify length (24”,36”, 48”, 60”, 72”)60Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

OS Directional Sign LightOS Directional Sign Light offers 360° swivel forprecision aiming of light. Lip on flat lens allows unitto be aimed upward while still main tain ing the ULlisting for wet locations.HousingTotally enclosed, fully assembled, corrosionresistant aluminum housings. Two splice boxes andendcaps included. Die-cast alu minum splice boxtapped 3/4” -14 N.P. All hardware is cor ro sionre sis tant stain less steel. Gasketed sockets; use withremote ballast. KOs provided top and ends.ShieldingExtruded clear wrap around acrylic snap-in diffuserthat will not discolor.ElectricalFully wired for 120V, 60Hz operation. All unitsare supplied with remote, low tem per ature,weatherproof 120V ballast, unless otherwisespecified.MountingRun conduit (not supplied) from remote ballast toindividual fixtures, continuous rows or end-of-rowfixtures.NOTE: Add 2 1/2” to total overall lengthfor continuous runs. See dimensional drawings.FLUORESCENT - industrialOS Directional Sign Light Ordering InformationSeries # Lamps Lamp Type Ballast VoltageLip on flat lens allows unitto be aimed upward.OS 1221 = Tandem, Two Lamps*Non-weatherproof ballast only.48 = 48” T12, 50.5” conduit centers72 = 72” T12, 74.5” conduit centers96 = 96” T12, 98.5” conduit centersHO = High OutputVHO = Very High Output120 = 120V277* = 277VL/B = Less BallastAccessoriesDimensionsOS SPLICE BOX = Splice Box for continuous row mountingCAPContinuous runIT 3/4" THREAD2 1/2"ENDCAPSPLICE CAP(2) NEOPRENEGASKETSCONDUIT 3/4" THREAD2 1/2"Continuous run3 1/4"6"Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 61

CH Original Patented StripliteFLUORESCENT - industrialThe CH Series is ideal for general purpose lightingin retail stores and commercial environments.Available in 2’, 3’, and 4’ individual lengths as wellas continuous row mounting.HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat with re mov able wireway access panel. Ampleknock outs provided on side, back and ends. Shippedfully wired and assembled, including socket saddle.Simply flip up socket bar and attach wireway coverwith turn fastener provided. Machine installed shuntseliminate loose socket bar connections on electronicstrips.OptionsModular wiring, white or silver asymmetric orsymmetric re flec tors, and emergen cy lighting batterypacks are available options.ElectricalCH Original Patented Striplite Ordering InformationFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingCombination end plate/joiner connect units forcontin u ous row or wire through, see CHJ on page 93.Optional plug-in wiring system de scribed in detail onpage 92.Series # Lamps LampsCHTTCH 12421 = Tandem, two lamps22 = Tandem, four lamps14 = 14W 15” T1214 = 14W 24” T515 = 15W 18” T8/T1217 = 17W 24” T820 = 20W 24” T1221 = 21W 36” T524 = 24W 24” T5HO25 = 25W 36” T828 = 28W T530 = 30W 36” T1232 = 32W 48” T839 = 39W 36” T5HO40 = 34/40W 48” T1240TT = 40W 22” TT54 = 54W T5HOELS Options Ballast Switching VoltageFlip-up sockets Patent#4,422,1322 5/8"ELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)B5 = Electronic T12B11 = Electronic T8B11HP(x) = HPT8*B12 = Electronic T5B14 = Electronic TTB22 = LPF Electronic T8/T12D = Dimming (specify ballast)For 4 lamp unitsBlank = dual ballasts4L = (1) 4-lamp ballast*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.For 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsUNV = 120-277V120 = 120V277 = 277V1 7/8"2 3/4"OptionsAccessoriesAVAILABLEDimensionsCord and PlugCPT(x) (Twist + Lock)1= 120V2 = 277VCP3 = Cord & Plug - 120VStraight Blade 5-15PPlug-in ConnectorsBallast wired to Black:PL1 - one circuit, two wiresPL2 BK - two circuits, three wiresBallast wired to Red:PL2 RD - two circuits, three wiresReflectors (Not compatible with wire guards)SymmetricSR(x)(y)20 = 24”SR(x)(y)30 = 36” (Order 2 for tandem 72” units)SR(x)(y)40 = 48” (Order 2 for tandem 96” units)AsymmetricAR(x)20 = 24”AR(x)30 = 36” (Order 2 for tandem 72” units)AR(x)40 = 48” (Order 2 for tandem 96” units)(x) Enter (W) for white or (S) for specular aluminum(y) Enter # lamps (1 or 2)1 7/8"1 7/8"2 5/8"4 1/4"3 13/16"3 13/16"FB = Fast blow fuseSB = Slow blow fuseBP = Bulk PackAC = Alignment ClipsCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”CS24 = “S” Hook (4) Chain Hanger Assembly (24” total drop)PM(x) = Pendant Mount, white stem - specify length in inches (24, 36, 48, 60, 72)C = Single white canopy (for use with pendant mount)CHJ = Housing JoinerSN = Snapper BracketsWG(x)20 = 24” (Specify # Lamps) (1 or 2)WG(x)30 = 36” (Specify # Lamps) (1 or 2)WG(x)40 = 48” (Specify # Lamps) (1 or 2)62Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

CHX Slimline And High Output ChannelHousingHigh-gloss, baked white enamel finish on steelhousing with re mov able wireway access panel.Fixture is shipped fully wired and as sem bled.CHX models have patented (#4,422,132) flip-upsocket bar and turn fastener for attaching wirewaycover.OptionsOptions include modular wiring, plug-in systems andwire guards.ElectricalFully wired for 120V, 60Hz operation with thermallyprotected, automatic resetting, Class P, high-powerfactorballast, unless otherwise spec i fied. UL listed,damp location.MountingCombination end plate/joiner connects units forcontinuous row or wire through. Heavy duty joinerplate available. Surface or pendant mount, highoutput model must be suspended at least 6” fromceiling for cooler operation.FLUORESCENT - industrialSlimline and High Output Channels are idealfor maximum illumination in retail stores andcommercial environments. Available in 4’, 6’, and8’ individual lengths as well as continuous rowmounting.CHX Slimline And High Output Channel Ordering InformationSeries # Lamps Lamp Length(nominal)CHX 123421 = Tandem, Two Lamps48 = 48”72 = 72”96 = 96”ELS OptionsELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)DimensionsBallastB5 = Electronic T12HOB5 = High Output Electronic T12B11 = Electronic T8HOB11 = High Output Electronic T8HO* = High Output T12VHO* = Very High Output T12*Must be mounted at least 6” from surfaceVoltageUNV = 120-277V120 = 120V277 = 277V4 1/4"1 7/8"3 13/16"**HO and VHO are 4 5/8” deepOptionsCord and PlugCPT(x)1= 120V2 = 277VCP3 = Cord & Plug - 120V StraightBlade 5-15PPlug-in ConnectorsBallast wired to Black:PL1 - one circuit, two wiresPL2 BK - two circuits, three wiresBallast wired to Red:PL2 RD - two circuits, three wiresFB = Fast blow fuseSB = Slow blow fuse*Not compatible with wire guardsAccessoriesReflectors*(x) Enter (W) for white or (S) for specular aluminumSymmetricSR(x)30 = 36” (Order 2 for 72” units)SR(x)40 = 48” (Order 2 for 96” units)AsymmetricAR(x)30 = 36” (Order 2 for 72” units)AR(x)40 = 48” (Order 2 for 96” units)AC = Alignment ClipsCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”CS24 = “S” Hook (4) Chain Hanger Assembly (24” total drop)PM(x) = Pendant Mount, white stem - specify length in inches (24, 36, 48, 60, 72)C = Single white canopy (for use with pendant mount)CHJ = Housing JoinerSN = Snapper BracketsWG230 = 36” (Order 2 for 72” units)WG240 = 48” (Order 2 for 96” units)Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 63

CHA and CHS StriplitesFLUORESCENT - industrialCHS One Lamp24” to 96”CHA - Two or three lampsmounted at 90°24”, 36”, 48”CHS Two Lamp24” to 48”HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat with removable wireway access panel. Fixtureis shipped fully wired. Secure wireway cover withscrew. Ample knockouts provided.OptionsOptions include modular wiring and master unitballast driving multiple fixtures, e.g., CHS232 B114L-M will drive the second fixture CHS232-S (lessballast). Optional plug-in wiring system de scribed indetail on page 92.ElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingIndividual or con tin u ous row.CHA and CHS Striplites are ideal forcustom lighting in retail stores and commercialenvironments.AVAILABLECHA and CHS Striplites Ordering InformationSeries # Lamps Lamps ELS OptionsCHA = Lamps mount at 90°CHS = Side-mount lamp(s)*CHS196 is 4” wide x 3” deep1 (CHS only)23 (CHA only)21 = Tandem, 2 lamps(CHS Only)17 = 17W 24” T820 = 20W 24” T1225 = 25W 36” T830 = 30W 36” T1232 = 32W 48” T840 = 34 or 40W 48” T1296 = 96” T8 Slimline (CHS 1-lamp only)*ELS1 = Emergency Lighting(low lumens)ELS2 = Emergency Lighting(medium lumens)ELS3 = Emergency Lighting(high lumens)Ballast Switching VoltageDimensionsB5 = Electronic T12B11 = Electronic T8B11HP(x) = HPT8**D = Dimming (specify ballast)For 3 lamp unitsBlank = dual ballasts3L = (1) 3-lamp ballastUNV = 120-277V120 = 120V277 = 277V**CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.OptionsCHACHS2 13/16"4 3/8"2 3/4"1 7/8"3 7/16"1 7/8"Cord and PlugCPT(x)1= 120V2 = 277VCP3 = Cord & Plug - 120V Straight Blade 5-15PPlug-in ConnectorsBallast wired to Black:PL1 - one circuit, two wiresPL2 BK - two circuits, three wiresBallast wired to Red:PL2 RD - two circuits, three wiresFB = Fast blow fuseSB = Slow blow fuse4 1/2" 2"6 1/2"64Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

LP5 and LS5 Low Profile T5 StripNEWHousingDie formed heavy gauge steel chemically treated toensure superior adhesion of post production appliedhigh reflectance powder coating.ElectricalFully wired for electronic T5, UNV 120-277V,50-60Hz operation with thermally protected,automatic resetting Class P, sound rated A ballast asstandard unless otherwise specified. UL listed.MountingCeiling or surface mount. 3/8” feed connectoris included for use with steel flex conduit. Notrecommended for through wiring.FLUORESCENT - industrialXIntroducing the new LP5 and LS5 series, arevolutionary Low Profile line of Single lamp T5open strips. LP5 is an open strip with a distinctly lowprofile (7/8”) and even with lamp is a mere 1 5/8”high. The width is a slim 1 1/4” making the LP5the thinnest and lowest 114 profile / 124H strip on models: the market. X=22.402"Perfect for accent and 121 task / lighting. 134H Both models: also include X=34.213"exclusive tabbed lamp128holders/ 154Hfor easemodels:of changingX=45.984"lamps and assurance that the lamp is properlyseated in the socket.LP5 Low Profile Ordering InformationSeries # Lamps Lamps Ballast VoltageLP5 1 Preheat06 = F6T5 (9”) 120V Only08 = F8T5 (12”) 120V OnlyStandard14 = F14T5 (22”)21 = F21T5 (34”)28 = F28T5 (46”)HO24H = F24T5HO (22”)39H = F39T5HO (34”)54H = F54T5HO (46”)E = ElectronicU1 = 120-277V120 = 120VLS5 Low Profile Side-Mount Ordering Information2.092"Series # Lamps Lamps Ballast Voltage1.339"1.339"LS5 1 Standard14 = F14T5 (22”)21 = F21T5 (34”)28 = F28T5 (46”)E = ElectronicU1 = 120-277VDimensions1.264"1.264"HO24H = F24T5HO (22”)39H = F39T5HO (34”)54H = F54T5HO (46”)X114 / 124H models: X=22.402"121 / 134H models: X=34.213"128 / 154H models: X=45.984"LP5 Standard MountLS5 Side Mount2.092"1.339"1.339"1.264"1.264"Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 65

WS Slim StripliteFLUORESCENT - industrialWS Series Slim Striplite and remote ballast boxfixture are ideal for tight areas requiring multiplefixtures.AVAILABLEHous ingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat. Re mov able front panel al lows ac cess for wiringwith snap-in conduit fittings on site. Quick as semblyto back panel with screws provided. Em bossedmount ing holes through fixture speed up mountingto surface and allow remote assembly, if required.Striplite is shipped sep a rate from remote ballast boxand flex assemblies.ElectricalBallast and flex prepared as specified. Fullywired for UNV 120-277V, 50-60Hz operation withthermally protected, automatic resetting Class P,sound rated A ballast as standard unless otherwisespecified. UL listed.Mounting and Ballast BoxOne 18” bal last box can comfortably handle up to4 striplites, utilizing the four standard knockouts.Ballast box access cover is held in place with tab andquarter-turn fastener.WS Series Slim Striplite Ordering InformationDimensionsSeriesWS = Single lamp Slim Channel, one conduit holeWSWT = Channel for wire thru, conduit hole on each end = add 2” length18” ballast box ordering informationLamp117 = 17W T8 (26” fixture length)125 = 25W T8 (38” fixture length)132 = 32W T8 (50” fixture length)1 3/4"5/8"1 13/16"Box # Lamps Driven* Ballast VoltageWSRB 1234B11 = Electronic T8B11HP(x) = HPT8**UNV = 120-277V*Specify number of lamps to be driven by one ballast to a maximum of 4.** CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.Flex connectorsSeries Length* # Wires + Ground* Connector (end 1) Connector (end 2)WSFL 6 = 6’(standard) 3W = 3 wire (red, green, blue) STR = Straight90 = 90˚*Contact factory for other lengths and wire configurationsSTR = Straight90 = 90˚66Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

STC Staggered StriplitesSTC Staggered Striplites are ideal forcustom lighting in retail stores and commercialenvironments. Striplites are available in 2’, 3’, 4’,and 8’ Tandem as well as continuous row mounting.HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat with removable wireway access panel. Fixtureis shipped fully wired. Secure wireway cover withscrew. KOs provided.OptionsOptional plug-in wiring system de scribed in detail onpage 92.STC Staggered SeriesElectricalFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingIndividual or con tin u ous row. STC features staggeredends to eliminate shadows at overlap.FLUORESCENT - industrialAVAILABLESingle Lamp LengthDouble Lamp Length24” 27”36” 39”48” 51”93” (2 lamp) 99” (4 lamp)STC Ordering InformationSeries # Lamps Lamp Type ELS OptionsDimensionsSTC 1221 = Tandem two Lamps22 = Tandem four Lamps17 = 17W 24” T820 = 20W 24” T1225 = 25W 36” T830 = 30W 36” T1232 = 32W 48” T840 = 34 or 40W 48” T12ELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)4 1/4"2 1/8"1 11/16"3 5/8"Ballast Voltage OptionsB5 = Electronic T12B11 = Electronic T8B11HP(x) = HPT8*D = Dimming (specify ballast)UNV = 120-277V120 = 120V277 = 277VCord and PlugCPT(x)1= 120V2 = 277VCP3 = Cord & Plug - 120V StraightBlade 5-15PPlug-in ConnectorsBallast wired to Black:PL1 - one circuit, two wiresPL2 BK - two circuits, three wiresBallast wired to Red:PL2 RD - two circuits, three wiresFB = Fast blow fuseSB = Slow blow fuse*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 67

ST5 T5 Staggered StripFLUORESCENT - industrialNEWThe ST5 is a low profile staggered strip for T5 andT5HO lamps. The ST5 series is specifically designedto fit into small areas and coves, and with anoverlap of up to 4”, provides smooth and attractiveillumination. It can be used in conjunction with theSA5 to assure that cove lighting reaches the entirelength of the run.Housing:Die formed heavy gauge steel with high glosspowder coat finish. Removable wire-way accesspanel. Knockouts provided on ends and back forthrough or direct wiring. Lamp holders are “Tab”type for ease of relamping and to assure lamp isproperly seated in the sockets.Electrical:ST5 fixtures are electronic T5, 120-277V 50-60Hzand are UL/cUL listed.ST5 Ordering InformationSeries Size # Lamps Lamp TypeST52 = 2’ nominal length 26” overall length3 = 3’ nominal length 38” overall length4 = 4’ nominal length 50” overall lengthMounting:ST5 can be directly mounted in a cove orundercabinet in continuous rows.2 14 = 14 watt T5 (2’ unit)21 = 21 watt T5 (3’ unit)28 = 28 watt T5 (4’ unit)54H = 54 watt T5HO (4’ unit)BallastVoltageE = Electronic U1 = 120-277VDimensions2’ Model26 3⁄8”22 3⁄8”2-½”4”68Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

SA5 T5 Staggered Adjustable StripNEWThe SA5 is a low profile adjustable staggered stripfor T5 and T5HO lamps. The SA5 series is specificallydesigned to fit into small areas and coves andcompliments the ST5 series overlap that can be fieldadjusted to end a run or can be extended to 1 ½times its closed length to reduce fixtures required tolight a cove with smooth and attractive illumination.The SA5 can also be used as a two lamp T5 strip.Housing:Die formed heavy gauge steel with high glosspowder coat finish. Removable wire-way accesspanel. Knockouts provided on ends and back forthrough or direct wiring. Lamp holders are “Tab”type for ease of relamping and to assure lamp isproperly seated in the sockets.Electrical:SA5 fixtures are electronic T5, 120-277V 50-60Hzand are UL/cUL listed.SA5 Ordering InformationMounting:SA5 can be directly mounted in a cove orundercabinet in continuous rows.FLUORESCENT - industrialSeries Size # Lamps Lamp TypeSA5 2 = 2’ nominal length adjusts to 30”3 = 3’ nominal length adjusts to 50”4 = 4’ nominal length adjusts to 65”2 14 = 14 watt T5 (2’ unit)21 = 21 watt T5 (3’ unit)28 = 28 watt T5 (4’ unit)54H = 54 watt T5HO (4’ unit)BallastVoltageE = Electronic U1 = 120-277VDimensions3’ ModelX34 ¼”2 ½”SA52 Models: X = 22 3⁄8” - 31” Y = 0” - 8 5⁄8”SA53 Models: X = 34 ¼” - 49” Y = 0” - 14 ¾”SA54 Models: X = 46” - 66” Y = 0” - 20”YCall 800.523.3602 • Fax 215.831.7703 • www.simkar.com 69

SKDL and SKDDL DocklightFLUORESCENT - industrialHousingHeavy gauge steel with high-gloss baked “safety”yellow enamel finish over rust inhibiting phosphatecoat. Single strut (SKDL) mounting arm units areequipped with a folding knuckle joint allowingfor horizontal and vertical adjustment. Doublestrut (SKDDL) mounting arm units provide greaterstrength and durability. All units supplied withlightweight, corrosion resistant polycarbonate lamphead.Electrical6’ 120V 18-3 cord, plug, and rocker switch supplied.UL listed.MountingHorizontal mount. Two piece wall mounting bracketprovided.The docklight series uses polycarbonate heads forresistance to dents, breaks, bends and stays cool tothe touch. Double strut arms (SKDDL) on the HIDmodel provides sturdy, durable construction. Highpressure sodium option is available for long lamplife and lower starting temperature.SKDL and SKDDL Series Ordering InformationSeries Lamp Arm Length* Lamp HeadSKDL = Single strutSKDDL = Double strut*For 24” or 90” arm lengths contact factory.HPS = 50W High pressure sodium(Leave blank for R40 or PAR38 150W max)40 = 40”60 = 60”P = PolycarbonateDimensionsDL-40 49"DL-60 68"AccessoriesSKWG8P = Stainless steel wireguard to protect lamp. Mountseasily to holes provided in polycarbonate lamp head.SKDLFAN* - FanReplacement Lamp HeadsSKINC-HEAD = For incandescent modelsSKHPS-HEAD = For high pressure sodium models*Available with SKDDL, double strut only. Lamp provided.DL-40 23" DL-40 49"DL-60 33" DL-60 68"DL-40 23"DL-60 33"DL-40 17"DL-60 21"DL-40 17"DL-60 21"DDL-60 64-1/2"DDL-40 46"DDL-60 32-1/4"DDL-40 22-1/4" DDL-60 64-1/2"DDL-40 46"24"L3-Conductor CordDDL-60 32-1/4"DDL-40 22-1/4"14"24"L3-Conductor Cord14"70Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com

Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 71FLUORESCENT - industrial