EN2 Enclosed gasketed weatherproofHousingHousing to be 1-piece, custom reinforced thermalsetpolyester that is corrosion proof and willwithstand extreme abuse and neglect. Housingmaterial to be UL 5VA and f1 rated. Gasket tobe a seamless, custom formulated foam-in-place,urethane gasket, chemically attached to the housingand robotically applied to ensure consistency,accuracy, and reliability. All models are NSF SplashZone rated for high pressure wash down. 2’ unit tobe IP65 rated for dust-free and wash down; 4’ and8’ units to be IP67 rated for dust-free and waterfreeingress protection (temporary submersion for30 minutes).ElectricalT8 and HPT8 technology: Ballast to be electronic,<strong>In</strong>stant Start, fully wired with quick-disconnectdevice: Universal voltage 120 – 277VAC, 50/60Hz,Starting temperature 0°F (-18°C),< 15% THD, High-Power Factor, Thermallyprotected, Automatic resetting, Class P, Sound ratingA.T5 and T5HO technology: Ballast to be electronicProgram Start, fully wired with quick-disconnectdevice: Universal voltage 120 – 277VAC, 50/60Hz,Starting temperature 0°F (-18°C), < 15% and
FLUORESCENT - industrialFeatures & BenefitsNEWTop rated UL fire resistant housing: UL 94, 5VAreinforced thermal set polyester housingUL 746C rated f1 housing material meets outdoorUV and Water Immersion requirementsTwo external mounting system availableSecurely attached, over-center, stainless steellatching system that is tamper proof readyTool-free, hinged gear tray for ease of maintenanceand convenienceRugged, impact resistant lenses: non-yellowing,100% certified High Impact acrylicSuperior sealing system produces a dust proof, washdown fixture with an IP67ratingNSF high pressure wash down approved for Splashand Non-Food Zone Processing AreasAvailable with Fluorescent T5, T5HO, T8, or HPT8technologiesAvailable in a 4’ housing with 4 or 6 lampconfigurationsSimkar is proud to announce a family of demandingenvironment T5/T8 luminaires that will stand upto the nasty forces of wind, water, temperatureextremes, dust, salt, and abuse. Simkar’sweatherproof EN3 Series luminaires are a lowprofile design and are 14-1/2” wide and 52” longand are perfect for areas that need high light levelsor high mounting heights. You have choices of 4or 6 lamp versions to meet your lighting needs.The housings are made of custom reinforced,thermal-set polyester that is corrosion resistantand will withstand extreme abuse and neglect. Atough injection molded, clear, 100% certified HighImpact acrylic gives you a tough, non-yellowinglens that will exceed your expectations. An optionalCertifications:• UL, cUL wet location• UL, CSA recognized components• NSF Certified for high pressure wash downsplash zone processing areas• NEMA 4X• IP66/67 certified: Dust-free, high pressurewashdown/temporary immersion for 30minutesEN3 Enclosed gasketed weatherproofFinally, an <strong>In</strong>door/Outdoor, corrosion proof, enclosed andgasketed fixture that does it all.injection molded, UV stabilized polycarbonate lensis also available. The sealing flanges of the injectedmolded lenses were designed to work in conjunctionwith our custom formulated foam-in-place, closedcell polyurethane gasket. This gasket is a seamlessgasket that chemically attaches to the housingand is robotically applied to ensure consistency,accuracy, and reliability. As a result of this designsystem, we have been able to achieve a number ofimpressive certifications: IP67 rating for a dust freeluminaire capable of temporary submersion underwater for 30 minutes, NEMA 4X ideal for marineenvironments, and NSF high pressure wash down forsplash zone food processing areas.VANDALAVAILABLERESISTANT5.95”14.61”51.91”56Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com