OS Directional Sign LightOS Directional Sign Light offers 360° swivel forprecision aiming of light. Lip on flat lens allows unitto be aimed upward while still main tain ing the ULlisting for wet locations.HousingTotally enclosed, fully assembled, corrosionresistant aluminum housings. Two splice boxes andendcaps included. Die-cast alu minum splice boxtapped 3/4” -14 N.P. All hardware is cor ro sionre sis tant stain less steel. Gasketed sockets; use withremote ballast. KOs provided top and ends.ShieldingExtruded clear wrap around acrylic snap-in diffuserthat will not discolor.ElectricalFully wired for 120V, 60Hz operation. All unitsare supplied with remote, low tem per ature,weatherproof 120V ballast, unless otherwisespecified.MountingRun conduit (not supplied) from remote ballast toindividual fixtures, continuous rows or end-of-rowfixtures.NOTE: Add 2 1/2” to total overall lengthfor continuous runs. See dimensional drawings.FLUORESCENT - industrialOS Directional Sign Light Ordering <strong>In</strong>formationSeries # Lamps Lamp Type Ballast VoltageLip on flat lens allows unitto be aimed upward.OS 1221 = Tandem, Two Lamps*Non-weatherproof ballast only.48 = 48” T12, 50.5” conduit centers72 = 72” T12, 74.5” conduit centers96 = 96” T12, 98.5” conduit centersHO = High OutputVHO = Very High Output120 = 120V277* = 277VL/B = Less BallastAccessoriesDimensionsOS SPLICE BOX = Splice Box for continuous row mountingCAPContinuous runIT 3/4" THREAD2 1/2"ENDCAPSPLICE CAP(2) NEOPRENEGASKETSCONDUIT 3/4" THREAD2 1/2"Continuous run3 1/4"6"Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com 61
CH Original Patented StripliteFLUORESCENT - industrialThe CH Series is ideal for general purpose lightingin retail stores and commercial environments.Available in 2’, 3’, and 4’ individual lengths as wellas continuous row mounting.HousingDie-formed heavy gauge steel with high-gloss, bakedwhite enamel finish over rust inhibiting phosphatecoat with re mov able wireway access panel. Ampleknock outs provided on side, back and ends. Shippedfully wired and assembled, including socket saddle.Simply flip up socket bar and attach wireway coverwith turn fastener provided. Machine installed shuntseliminate loose socket bar connections on electronicstrips.OptionsModular wiring, white or silver asymmetric orsymmetric re flec tors, and emergen cy lighting batterypacks are available options.ElectricalCH Original Patented Striplite Ordering <strong>In</strong>formationFully wired for UNV 120-277V, 50-60Hz operationwith thermally protected, automatic resetting ClassP, sound rated A ballast as standard unless otherwisespecified. UL listed damp location.MountingCombination end plate/joiner connect units forcontin u ous row or wire through, see CHJ on page 93.Optional plug-in wiring system de scribed in detail onpage 92.Series # Lamps LampsCHTTCH 12421 = Tandem, two lamps22 = Tandem, four lamps14 = 14W 15” T1214 = 14W 24” T515 = 15W 18” T8/T1217 = 17W 24” T820 = 20W 24” T1221 = 21W 36” T524 = 24W 24” T5HO25 = 25W 36” T828 = 28W T530 = 30W 36” T1232 = 32W 48” T839 = 39W 36” T5HO40 = 34/40W 48” T1240TT = 40W 22” TT54 = 54W T5HOELS Options Ballast Switching VoltageFlip-up sockets Patent#4,422,1322 5/8"ELS1 = Emergency Lighting (low lumens)ELS2 = Emergency Lighting (medium lumens)ELS3 = Emergency Lighting (high lumens)B5 = Electronic T12B11 = Electronic T8B11HP(x) = HPT8*B12 = Electronic T5B14 = Electronic TTB22 = LPF Electronic T8/T12D = Dimming (specify ballast)For 4 lamp unitsBlank = dual ballasts4L = (1) 4-lamp ballast*CEE listed T8; specify (L)ow, (N)ormal, or (H)igh ballast factor. Contact factory for NEMA Premium.For 2 lamp unitsBlank = single ballast2/1L = (2) 1-lamp ballastsUNV = 120-277V120 = 120V277 = 277V1 7/8"2 3/4"OptionsAccessoriesAVAILABLEDimensionsCord and PlugCPT(x) (Twist + Lock)1= 120V2 = 277VCP3 = Cord & Plug - 120VStraight Blade 5-15PPlug-in ConnectorsBallast wired to Black:PL1 - one circuit, two wiresPL2 BK - two circuits, three wiresBallast wired to Red:PL2 RD - two circuits, three wiresReflectors (Not compatible with wire guards)SymmetricSR(x)(y)20 = 24”SR(x)(y)30 = 36” (Order 2 for tandem 72” units)SR(x)(y)40 = 48” (Order 2 for tandem 96” units)AsymmetricAR(x)20 = 24”AR(x)30 = 36” (Order 2 for tandem 72” units)AR(x)40 = 48” (Order 2 for tandem 96” units)(x) Enter (W) for white or (S) for specular aluminum(y) Enter # lamps (1 or 2)1 7/8"1 7/8"2 5/8"4 1/4"3 13/16"3 13/16"FB = Fast blow fuseSB = Slow blow fuseBP = Bulk PackAC = Alignment ClipsCA24 = Chain Hanger Assembly - (2) 18” chains, (2) “V” hooks, (2) “S” hooks for total drop 24”CS24 = “S” Hook (4) Chain Hanger Assembly (24” total drop)PM(x) = Pendant Mount, white stem - specify length in inches (24, 36, 48, 60, 72)C = Single white canopy (for use with pendant mount)CHJ = Housing JoinerSN = Snapper BracketsWG(x)20 = 24” (Specify # Lamps) (1 or 2)WG(x)30 = 36” (Specify # Lamps) (1 or 2)WG(x)40 = 48” (Specify # Lamps) (1 or 2)62Call 800.523.3602 • Fax 215.831.7703 • www.simkar.com