RAPID PROTOTYPING

More documents

Recommendations

Info

SLShttp://www.youtube.com/watch?v=ShX_qXSTj_E&feature=related15/02/2010 S.AARNIO
6.4 LAMINATED OBJECT MANUFACTURINGLOMThe main components of the system are a feed mechanism that advances asheet over a build platform, a heater roller to apply pressure to bond the to thelayer below, and a laser to cut the outline of the part in each sheet layer. Aftereach cut is completed, the platform lowers by a depth equal to the sheetthickness (0.05 – 0,5 mm). The laser cuts the outline and the process isrepeated until the part is completed. After a layer is cut, the extra materialremains in place to support the part.Abbreviation:Material type:Materials:Min layer thickness:Surface finish:Build speed:Applications:LOMSolid (Sheets)15/02/2010 S.AARNIOThermoplastics such as PVC; Paper; Composites (Ferrousmetals; Non-ferrous metals; Ceramics)0,05 mmRoughFastForm/fit testing, Less detailed parts, Rapid tooling patterns…
Page 1 and 2: RAPID PROTOTYPINGBrandenburg Univer
Page 3 and 4: FUNDAMENTAL FABRICATION PROCESSESRP
Page 5 and 6: ADDITIVE PROCESSTypical layer thick
Page 7 and 8: 2.1 CAD MODEL CREATION:First the ob
Page 9: Since the .stl format is universal,
Page 12 and 13: 5.2 CLEAN AND FINISH:• Removement
Page 14 and 15: 4. SOME DISADVANTAGES OF RP• The
Page 16 and 17: 15/02/2010 S.AARNIO
Page 18 and 19: The task was to test different alte
Page 20 and 21: 15/02/2010 S.AARNIO
Page 22 and 23: Parts made of titamium are used for
Page 24 and 25: Architecture15/02/2010 S.AARNIO
Page 26 and 27: 6.1 STEREOLITHOGRAPHYSLAStereolitho
Page 28 and 29: 6.2 FUSED DEPOSITION MODELINGFDMFDM
Page 30 and 31: 6.3 SELECTIVE LASER SINTERING SLSSL
Page 34 and 35: LOMhttp://www.youtube.com/watch?v=Z
Page 36 and 37: 3DPAbbreviation:Material type:Mater
Page 38 and 39: 6.5 DIRECT METAL LASER SINTERINGDML
Page 40: THANK YOU FOR YOURATTENTION !HAVE A

RAPID PROTOTYPING

Create successful ePaper yourself

Delete template?

Save as template?