RAPID PROTOTYPING

More documents

Recommendations

Info

2. THE BASIC PROCESSCREATING THE 3D CAD MODEL OF THE DESIGNCONVERTING THE CAD MODEL INTO STL FORMATSLICING THE STL FILE INTO THIN LAYERSCONSTRUCTING THE MODEL ONE LAYER ATOP ANOTHERCLEANING AND FINISHING THE MODEL15/02/2010 S.AARNIO
2.1 CAD MODEL CREATION:First the object to be build is modeled:• using a CAD software package• or by using a laser scanner or a CoordinateMeasuring Machine (CMM). (”Reverseengineering””)15/02/2010 S.AARNIO
Page 1 and 2: RAPID PROTOTYPINGBrandenburg Univer
Page 3 and 4: FUNDAMENTAL FABRICATION PROCESSESRP
Page 5: ADDITIVE PROCESSTypical layer thick
Page 9: Since the .stl format is universal,
Page 12 and 13: 5.2 CLEAN AND FINISH:• Removement
Page 14 and 15: 4. SOME DISADVANTAGES OF RP• The
Page 16 and 17: 15/02/2010 S.AARNIO
Page 18 and 19: The task was to test different alte
Page 20 and 21: 15/02/2010 S.AARNIO
Page 22 and 23: Parts made of titamium are used for
Page 24 and 25: Architecture15/02/2010 S.AARNIO
Page 26 and 27: 6.1 STEREOLITHOGRAPHYSLAStereolitho
Page 28 and 29: 6.2 FUSED DEPOSITION MODELINGFDMFDM
Page 30 and 31: 6.3 SELECTIVE LASER SINTERING SLSSL
Page 32 and 33: SLShttp://www.youtube.com/watch?v=S
Page 34 and 35: LOMhttp://www.youtube.com/watch?v=Z
Page 36 and 37: 3DPAbbreviation:Material type:Mater
Page 38 and 39: 6.5 DIRECT METAL LASER SINTERINGDML
Page 40: THANK YOU FOR YOURATTENTION !HAVE A

RAPID PROTOTYPING

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?