FASTENERS - CHROMATE - Chromate Industrial Corporation

CIC 200 ANKA BOLTS – STAINLESS STEELPART NUMBERS / ANCHOR SIZES / MIN. EMBED.THREAD LENGTHS / FM APPROVAL OR UL LISTINGPart Anchor Min. Thread FM or ULNumber Size Embed. Length77900 I 1/4ʺ x 1-3/4ʺ 1-1/8ʺ 3/4ʺ –77901 I 1/4ʺ x 2-1/4ʺ 1-1/8ʺ 1-1/4ʺ –77902 I 1/4ʺ x 3-1/4ʺ 1-1/8ʺ 2-1/4ʺ –77917 E 3/8ʺ x 2-1/4ʺ 1-5/8ʺ 1-1/4ʺ FM/UL77903 E 3/8ʺ x 2-3/4ʺ 1-5/8ʺ 1-5/8ʺ FM/UL77918 E 3/8ʺ x 3ʺ 1-5/8ʺ 1-7/8ʺ UL77919 E 3/8ʺ x 3-1/2ʺ 1-5/8ʺ 2-3/8ʺ FM/UL77904 E 3/8ʺ x 3-3/4ʺ 1-5/8ʺ 2-5/8ʺ UL77905 E 3/8ʺ x 5ʺ 1-5/8ʺ 3-1/8ʺ UL77906 A 1/2ʺ x 2-3/4ʺ 2-1/4ʺ 1-3/8ʺ FM/UL77907 A 1/2ʺ x 3-3/4ʺ 2-1/4ʺ 2-3/8ʺ FM/UL77908 A 1/2ʺ x 4-1/2ʺ 2-1/4ʺ 3-1/8ʺ UL77909 A 1/2ʺ x 5-1/2ʺ 2-1/4ʺ 4-1/8ʺ FM/UL77920 A 1/2ʺ x 7ʺ 2-1/4ʺ 5-5/8ʺ FM/UL77910 A 5/8ʺ x 3-1/2ʺ 2-3/4ʺ 2ʺ FM/UL77911 A 5/8ʺ x 4-1/2ʺ 2-3/4ʺ 3ʺ FM/ULPart Anchor Min. Thread FM or ULNumber Size Embed. Length77912 A 5/8ʺ x 5ʺ 2-3/4ʺ 3-1/2ʺ UL77913 A 5/8ʺ x 6ʺ 2-3/4ʺ 4-1/2ʺ FM/UL77921 A 5/8ʺ x 7ʺ 2-3/4ʺ 5-1/2ʺ UL77922 A 5/8ʺ x 8-1/2ʺ 2-3/4ʺ 7ʺ UL77914 A 3/4ʺ x 4-1/4ʺ 3-3/8ʺ 2-3/8ʺ UL77923 A 3/4ʺ x 4-3/4ʺ 3-3/8ʺ 2-7/8ʺ UL77915 A 3/4ʺ x 5-1/2ʺ 3-3/8ʺ 3-5/8ʺ FM/UL77916 A 3/4ʺ x 6-1/4ʺ 3-3/8ʺ 4-3/8ʺ UL77924 A 3/4ʺ x 7ʺ 3-3/8ʺ 5-1/8ʺ UL77925 A 3/4ʺ x 8-1/2ʺ 3-3/8ʺ 6-5/8ʺ UL77926 A 3/4ʺ x 10ʺ 3-3/8ʺ 8-1/8ʺ UL77927 I 7/8ʺ x 8ʺ 3-7/8ʺ 4-3/4ʺ UL77928 I 1ʺ x 6ʺ 4-1/2ʺ 2-3/8ʺ –77929 I 1ʺ x 9ʺ 4-1/2ʺ 5-3/8ʺ –77930 E 1ʺ x 12ʺ 4-1/2ʺ 8-3/8ʺ –– – – – –21The published length is the overall length of the anchor. Allow for fi xture thickness plus one anchor diameter for the nut and washer thickness when selecting a length.FM - Factory Mutual ApprovedUL - Underwriters Laboratories ListedNote: Bold italic font (on part number designation) indicates non-stock item. Please call for delivery.ULTIMATE LOAD CAPACITIES FOR STAINLESS STEEL ANKA BOLTSIN NORMAL-WEIGHT CONCRETE 1, 2TighteningAnchor Min. Embedment TorqueDia. (in.) Depth (in.) (ft/lb)Minimum Concrete Compressive Strength (f ' c )2000 psi 4000 psi 6000 psiTension Shear Tension Shear Tension Shear(lbs.) (lbs.) (lbs.) (lbs.) (lbs.) (lbs.)1-1/8 8 1,240 1,580 1,440 1,620 1,740 1,6201/4 1-1/2 8 1,635 1,580 2,080 1,620 2,100 1,6202 8 1,900 1,580 2,080 1,620 2,100 1,6201-5/8 28 1,920 3,560 3,040 3,760 3,040 3,7603/8 2 28 2,800 3,560 3,850 3,760 4,075 3,7603 28 4,100 3,560 4,200 3,760 4,200 3,7602-1/4 60 3,440 6,540 5,560 6,800 6,540 6,8001/2 3 60 5,100 6,540 6,540 6,800 6,540 6,8004 60 5,700 6,540 6,540 6,800 6,540 6,8005/82-3/4 90 6,240 9,280 8,300 11,900 8,860 11,9004 90 7,125 9,280 9,000 11,900 9,000 11,9003/43-3/8 175 7,420 12,380 9,500 15,060 10,250 15,0605 175 10,640 12,380 10,640 15,060 10,640 15,0603-7/8 250 7,600 17,960 12,300 24,160 12,500 24,1607/8 4-1/2 250 9,600 17,960 12,500 24,160 12,500 24,1605-3/4 250 10,640 17,960 12,500 24,160 12,500 24,1604-1/2 300 8,740 26,420 13,820 31,100 17,125 31,1001 5-1/2 300 12,770 26,420 17,125 31,100 17,125 31,1006-1/2 300 16,605 26,420 17,125 31,000 17,125 31,1001. Tabulated load values are for anchors installed in concrete. Concrete compressive strength must be at the specifi ed minimum at the time of installation.2. Ultimate load capacities must be reduced by a minimum safety factor of 4.0 or greater to determine allowable working load.Consideration of safety factors of 10 or higher may be necessary depending upon the application such as life safety or overhead.030114 FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT21.7