FASTENERS - CHROMATE - Chromate Industrial Corporation

More documents

Recommendations

Info

BIN ASSORTMENTSCARBON STEELTHREADED RODYou Receive an 18-CompartmentBin with 2-1/8" Diameter Holes toSeparate and Protect ThreadedRods Needed in Maintenance!PART NO. 17792ONE STEEL 18-COMPARTMENT BIN24" wide, 24-3/82" high, 6-7/8" deep**Can be shipped via UPSINCLUDED IN THE ORIGINALASSORTMENT YOU WILL RECEIVE11 DIFFERENT ITEMS. YOU WILL BEABLE TO FILL IN ADDITIONAL SIZESEACH MONTH ON MY SERVICE CALL.COMPARTMENTS ARE FULLY LABELED.(See Plan-A-Graph for complete details) Use Bin Label Set #168138ASSORTMENT CONTAINS:11 Sizes 3' Threaded Rod (Carbon Steel) ....... 6-32 through 3/4-101 P/N 7960 – 18 Compartment Threaded Rod Bin040199<strong>CHROMATE</strong> - Quality...Service...Performance28A.1
CARBON STEEL THREADED RODP/N 17792 — 3 FOOT LENGTHS — 11 ITEMS / 18 HOLES6-32 x 3' 10-24 x 3' 1/4-20 x 3' 5/16-18 x 3' 3/8-16 x 3' 716-14 x 3' 1/2-13 x 3' 5/8-11 x 3' 3/4-10 x 3'THREADED THREADED THREADED THREADED THREADED THREADED THREADED THREADED THREADEDROD ROD ROD ROD ROD ROD ROD ROD ROD10304 10308 10312 10314 10316 10318 10320 10324 103268-32 x 3 10-32 x 3'THREADED THREADEDROD ROD10306 6030228A.2<strong>CHROMATE</strong> - Quality...Service...Performance040199
Page 2:
10FOR MORE INFORMATION ON OUR PRODU
Page 8 and 9:
ALLOY 200 VI-LOC WASHERS10THE MOST
Page 10:
CIC 200 PRO-SHIELD CAP SCREWS10UL
Page 14 and 15:
COMPONENT WASHERS10THE STANDARD WAS
Page 16 and 17:
ALLOY 200 USS FASTENER ASSORTMENTP/
Page 18 and 19:
ALLOY 200 SAE FASTENER ASSORTMENTP/
Page 20 and 21:
ALLOY 200 USS FASTENER ASSORTMENTP/
Page 22 and 23:
SINGLE ROW ADD-ON NUT ASSORTMENTP/N
Page 24 and 25:
TMTMCIC 200 PRO-SHIELD FASTENER ASS
Page 26 and 27:
TMTMCIC 200 PRO-SHIELD FASTENER ASS
Page 28 and 29:
MULTI-GRADE USS FASTENER ASSORTMENT
Page 30 and 31:
Page 32 and 33:
GRADE 8 CAP SCREWS (Cont'd)1/2 DIA.
Page 34 and 35:
GRADE 8 ALLOY WASHERSDESIGNED FOR H
Page 36 and 37:
GRADE 8 UNI-FIT FLAT WASHERSTIGHTE
Page 38 and 39:
GRADE 8 USS ALLOY FASTENER ASSORTME
Page 40 and 41:
GRADE 8 SAE ALLOY FASTENER ASSORTME
Page 42 and 43:
GRADE 8 USS ALLOY FASTENER ASSORTME
Page 44 and 45:
Page 46 and 47:
GRADE 8 USS ALLOY FASTNERS1/4SERVIC
Page 48:
Page 51 and 52:
HIGH COLLAR LOCK WASHERSDESIGNED FO
Page 53 and 54:
CIC 150 HEX SOCKET SET SCREWSTHERM
Page 55 and 56:
CIC 150 HEX SOCKET CAP SCREWS• H
Page 57 and 58:
CIC 150 BUTTON HEAD CAP SCREWS•
Page 59 and 60:
CIC 200 HEX SOCKET WRENCHESINDIVID
Page 61 and 62:
BIN ASSORTMENTSCIC 200 USS HEX SOCK
Page 63 and 64:
030192TMCIC 200 HEX SOCKET CAP SCRE
Page 65 and 66:
TORQUE DATA (Continued)NOMINALSIZE4
Page 67 and 68:
CIC 200 HEX SOCKET CAP SCREW ASSORT
Page 69 and 70:
CIC 150 HEX SOCKET CAP SCREW ASSORT
Page 71 and 72:
CARRIAGE ANDPLOW BOLTS13FEATURES:
Page 73 and 74:
CARRIAGE AND ELEVATOR BOLTSROUND HE
Page 75 and 76:
GRADE 2 HEX TAP BOLTSTHE PREVENTIVE
Page 77 and 78:
CARRIAGE BOLT BIN ASSORTMENTP/N 782
Page 79 and 80:
GRADE 2 HEX TAP BOLTS ASSORTMENTP/N
Page 81 and 82:
Page 83 and 84:
SLOTTED MACHINE SCREWS (Cont'd.)ROU
Page 85 and 86:
PHILLIPS MACHINE SCREWSPRECISION, B
Page 87 and 88:
MACHINE SCREW WASHERSSPECIALTY WASH
Page 89 and 90:
NYLON MACHINE SCREWS (Cont'd.)6/6 N
Page 91 and 92:
Page 93 and 94:
DRIVER BITSNUTSETTERS AND BITS FOR
Page 95 and 96:
CIC 200 HEX-LOCK SECURITY SCREWST
Page 97 and 98:
CIC 200 THUMB SCREWSTHUMB SCREW KN
Page 99 and 100:
TRIM SCREWSIDEAL FOR TRIM AND FINIS
Page 101 and 102:
FLEX-A-BIT ® FLEXIBLE EXTENSIONSFL
Page 103 and 104:
SCREWDRIVERSDIAL-N-LOAD AUTO SCREWD
Page 105 and 106:
SCREWDRIVERS - INSULATED1000V INSUL
Page 107 and 108:
Page 109 and 110:
SLOTTED METAL SCREWSHEX WASHER HEAD
Page 111 and 112:
PHILLIPS METAL SCREWSCOMBINATION SL
Page 113 and 114:
CIC 200 SUR-GRIP METAL SCREWSHEX
Page 115 and 116:
RUBBER GROMMET DRILL POINT SCREWSHE
Page 117 and 118:
RECOMMENDED DRILL SIZESPROPER DRILL
Page 119 and 120:
Page 121 and 122:
SLOTTED WOOD SCREWSDESIGNED FOR FAS
Page 123 and 124:
CIC 200 SUR-DRIVE WOOD SCREWSSQUA
Page 125 and 126:
MAD-MAX SCREWSTHE MULTI-MATERIAL SC
Page 127 and 128:
Page 129 and 130:
3/411-1/41-1/21-3/422-1/233-1/2456H
Page 131 and 132:
CIC 200 INTERNAL SNAP (RETAINING)
Page 133 and 134:
CIC 200 "E" (RETAINING) RINGS• P
Page 135 and 136:
CIC 200 TAPER PINS• AN AID IN HO
Page 137 and 138:
CIC 200 METRIC INTERNAL RETAINING
Page 139 and 140:
METRIC "E" (RETAINING) RINGS• THE
Page 141 and 142:
Page 143 and 144: HOLLOW WALL ANCHORSSCREW TYPE TOGGL
Page 145 and 146: PLASTIC HOLLOW WALL ANCHORSZIP-QUIC
Page 147 and 148: CIC 200 ANKA BOLTS - STAINLESS STE
Page 149 and 150: CIC 200 ANKA BOLTS - CARBON STEELS
Page 151 and 152: CIC 200 ANKA BOLT ACCESSORIESROD C
Page 153 and 154: CIC 200 EXPANSION SHIELDSFOR MACHI
Page 155 and 156: CIC 200 CEMENT BOLT ANCHORSHEX WAS
Page 157 and 158: CIC 200 SPECIAL ANCHORSVINYL SCREW
Page 159 and 160: CIC 200 HAMMER-LOCK ANCHORSFAST, E
Page 161 and 162: DROP-TITE ® ANCHOR SCREENSFOR ANCH
Page 163 and 164: TAPER BOLT ANCHORSHIGHEST TENSILE A
Page 165 and 166: TMTURBO-DRIVE ANCHORSSCREW AND ANCH
Page 167 and 168: CIC 200 SLEEVE ANKA BOLTSP/N 17062
Page 169 and 170: CIC 200 SLEEVE ANKA BOLTSP/N 17064
Page 171 and 172: 22FOR MORE INFORMATION ON OUR PRODU
Page 173 and 174: CIC 200 MULTI-GRIP PULL RIVETS (Co
Page 175 and 176: CIC 200 PULL RIVETS (Cont'd.)LARGE
Page 177 and 178: CIC 200 THREADED INSERT FASTENERS
Page 179 and 180: CIC 200 THREAD REPAIR INSERTSMETAL
Page 181 and 182: SELF-TAPPING THREADED INSERTSFOR US
Page 183 and 184: KNURLED FLANGED INSERT FASTENERS (C
Page 185 and 186: 2222.14 FOR MORE INFORMATION ON OUR
Page 187 and 188: CIC 200 METRIC THREAD REPAIR INSER
Page 191 and 192: THREADED ROD AND COUPLINGSFORMING R
Page 193: 2828.M2 FOR MORE INFORMATION ON OUR
Page 197 and 198: CIC 200 B7 ALLOY THREADED RODP/N 17
Page 201 and 202: 18-8 STAINLESS STEEL CAP SCREWSHEX
Page 203 and 204: 18-8 S/S HEX SOCKET CAP SCREWSFLAT
Page 205 and 206: 18-8 STAINLESS STEEL MACHINE SCREWS
Page 207 and 208: 18-8 STAINLESS STEEL ACORN NUTS18-8
Page 209 and 210: S/S SPRING PINS AND COTTER PINSS/S
Page 211 and 212: BRASS NUTS AND WASHERSFOR BRASS MAC
Page 213 and 214: S/S METRIC FLAT SOCKET HEAD CAP SCR
Page 215 and 216: METRIC S/S PHILLIPS MACHINE SCREWSU
Page 217 and 218: 3232.M6 FOR MORE INFORMATION ON OUR
Page 219 and 220: USS 18-8 STAINLESS STEEL FASTENER A
Page 221 and 222: USS 316 STAINLESS STEEL FASTENER AS
Page 225 and 226: METRIC HEX NUTS AND WASHERSMETRIC H
Page 227 and 228: CIC 200 METRIC FLAT SOCKET HEAD CA
Page 229 and 230: METRIC SAFETY SPRING WASHERSSTANDAR
Page 231 and 232: METRIC HEX SOCKET WRENCH SETS"T" HA
Page 233 and 234: METRIC SLOTTED MACHINE SCREWSPRECIS
Page 235 and 236: EQUIVALENCY TABLEMETRIC CAP SCREW T
Page 237 and 238: 3333.14 FOR MORE INFORMATION ON OUR
Page 239 and 240: CHROMATE METRIC FASTENER ASSORTMENT
Page 241 and 242: METRIC HEX SOCKET CAP SCREW & WASHE
Page 243 and 244: METRIC 8.8 CAP SCREWS ZINC PLATED A
Page 245 and 246:
METRIC 10.9 CAP SCREWS ZINC PLATED
Page 247 and 248:
METRIC 10.9 FASTENER ASSORTMENTP/N
Page 249 and 250:
Page 251 and 252:
GRADE 5 NUTSDESIGNED FOR USE WITH G
Page 253 and 254:
WASHERSUSS WASHERSUSS WIDEBAND WASH
Page 255 and 256:
GRADE 5 USS FASTENER ASSORTMENTP/N
Page 257 and 258:
GRADE 5 USS FASTENER ASSORTMENTP/N
Page 259 and 260:
GRADE 5 SAE FASTENER ASSORTMENTP/N
Page 261:
show all

FASTENERS - CHROMATE - Chromate Industrial Corporation

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?