FASTENERS - CHROMATE - Chromate Industrial Corporation

TMTURBO-DRIVE ANCHORSSCREW AND ANCHOR IN ONE!• THIS ALL STEEL ANCHOR INSTALLS IN WALLBOARD, PLYWOOD, CONCRETE, HOLLOW OR GROUT FILLED BLOCK,BRICK OR PLASTER• NO SECOND STEP, INSTALLS DIRECTLY THROUGH FIXTURE INTO WALLBOARD• PATENTED DESIGN PROVIDES FOR SMOOTH ENTRY, CLEAN CUTTING AND A POWERFUL HOLD• THREAD DESIGN PREVENTS SPINNING AND STRIPPING• HEAT TREATED POINT PENETRATES METAL AND WOOD STUDS• LEAVES A MUCH SMALLER HOLE THAN TOGGLES OROTHER SYSTEM WHEN REMOVEDPAN HEAD• SELF-DRILLS OWN SMALL HOLE IN WALLBOARD• INSTALLS QUICKLY AND EASILY WITH AOVAL HEADPHILLIPS SCREWDRIVER• CAN BE EASILY BACKED-OUT• NO NEED FOR SHIELDS• NO HOLE SPOTTINGINSTALLATION PROCEDUREFor fastening into wallboard or wood, no pre-drilling is required. The anchor isinserted through the fixture and screwed in with an ordinary phillips screwdriver.For fastening into concrete, hollow or grout filled block, brick or plaster requires a3/16" pre-drilled hole with a carbide drill bit.17929 &17930DESCRIPTIONPART21 3/16 x 1-1/4 Chrome Pan Head T 886563/16 x 1-1/4 White Pan Head T 886573/16 x 1-1/4 Chrome Oval Head T 886583/16 x 1-1/4 White Oval Head T 88659ANCHORDIAMETERINCHES(mm)WALLBOARD AND PLYWOOD1/2" WALLBOARD 5/8" WALLBOARD 1/2" PLYWOODTENSION SHEAR TENSION SHEAR TENSION SHEARLBS. LBS. LBS. LBS. LBS. LBS.(kN) (kN) (kN) (kN) (kN) (kN)NORMAL WEIGHT CONCRETEANCHOR EMBEDMENTDIAMETER DEPTHINCHES INCHES(mm) (mm)MINIMUM CONCRETECOMPRES. STRENGTHTENSION SHEARLBS. LBS.(kN) (kN)1/4 85 245 135 360 255 600 1/4 3/4 350 1,030(6.4) (0.4) (1.1) (0.6) (1.6) (1.1) (2.7) (6.4) 1/4 (19.1) (1.6) (4.6)(6.4) 1 700 1,070(25.4) (3.2) (4.8)GROUT FILLED AND HOLLOW CONCRETE MASONRY AND STRUCTURAL BRICK MASONRYANCHOR EMBEDMENTDIAMETER DEPTH ANCHORINCHES INCHES LOCATION(mm)(mm)1/4(6.4)GROUT FILLED CMU HOLLOW CMU STRUCTURAL BRICK MASONRYASTM C-90 BLOCK ASTM C-90 BLOCK FM > 1500 psi (10.3 MPa)TENSION SHEAR TENSION SHEAR TENSION SHEARLBS. LBS. LBS. LBS. LBS. LBS.(kN) (kN) (kN) (kN) (kN) (kN)3/4 Center of – – – – 400 650(19.1) Masonry Unit (1.8) (2.9)3/4 T-Joint – – – – 350 600(19.1) (1.6) (2.7)1 Center of 285 825 305 825 600 900(25.4) Masonry Unit (1.3) (3.7 (1.4) (3.7) (2.7) (4.1)1 T-Joint 290 915 290 915 380 825(25.4) (1.3) (4.1) (1.3) (4.1) (1.7) (3.7)21.24 FOR MORE INFORMATION ON OUR PRODUCTS OR SYSTEMS, CALL 1-800-BUY-BOLT030114