S200-W16 Insulation Sheathing Stapler - Paslode

21123252223S200 W165012652624CapAssembly#501262427283785293814393Main ValveAssembly #50126111121314 1516679103132333435304041424445476343465149TriggerAssembly#50104848595056625352455557585451Piston Assembly#5012671819172076778180833682676665646160507476777879755173726845697071WARNINGAll parts must be periodically inspected and replaced if worn orbroken. Failure to do this can affect the tool's operation andpresent a safety hazard

00ACCESSORIESSequential Operating KitThis special attachment is designedfor sequential operation (stops "contact" firing).The operator must depress and hold the workcontacting element against the worksurface before pulling the trigger.This sequence must be repeated each timethe tool drives a fastener. Part No. 501039Remote Fire ValveThis valve via a positive air signal allows a machinemounted tool to be operated from an automatic airvalve or foot pedal system.Part No. 1X0713Large Nylon Tool Bag Part No. 219246Safety GlassesClear Part No. 402510Tinted Part No. 402512Belt HookAttaches to tool enabling you to carry tool on beltholder.Part No. 500955Belt Hook HolderAttaches to work belt and carries tool using the abovebelt hook.Part No. 219028Wide Crown Stapler Repair KitThis kit repairs all air leaks except for the trigger valve.Part No. 219222Trigger Valve Repair KitThis kit repairs all trigger valve air leaks. Part No. 219224Lubricants and LoctiteLubricant 1 lb. Part No. 403734Lubricant 5 gram tubes Part No. 219188Loctite 242 (Blue) 1 oz. Part No. 093500Lubricating Oil 16 oz. Part No. 403720Lubricating Oil 8 oz. with Antifreeze Part No. 219090Degreaser CleanerIdeal cleaner for all Paslode tools. Part No. 219086Adjustable Foam Contacting Element Part No. 402997Rear Activating Contacting Element Part No. 1x1026➔➔SAFETY INSTRUCTIONSWEAR EYE AND HEARING PROTECTIONDO NOT EXCEED MAXIMUMRECOMMENDED AIR PRESSUREAlways wear hearing protection and eyeprotection devices, including side shieldswhen operating or working in the vicinityof a tool.6060120Operate the tool using only the recommendedair pressure. Do not exceed themaximum air pressure marked on the tool.Be sure the air pressure gauge is operatingproperly and check it at least twice a day.120Never use any bottled air or gasessuch as oxygen to operate the toolsince they could cause the tool toexplode.Printed in U.S.A.© 2006, Illinois Tool Works, Inc.PAn Illinois Tool Works Company888 Forest Edge DriveVernon Hills, Illinois 60061501353-509/06