Staples and Brads - Paslode Nails Performance

Safety Data SheetSection 1 – IdentificationProduct Identifier:Staples and Brads FastenersManufacturer:Paslode888 Forest Edge DriveVernon Hills, IL 60061-1900Information Telephone Number: 847-634-1900Information Facsimile Number: 847-634-6602Information Email Address:tech@paslode.comEmergency Telephone Number: Call CHEMTREC Day or NightWithin U.S. and Canada: 1-800-424-9300Outside U.S. and Canada: +1 703-527-3887 (collect calls accepted)Recommended Use:Fastening wood assemblies.Restrictions on Use:See conditions of use for specific applications at:www.paslode.com/about-nails.html.Note to User: This product is considered an “article” per Title 29 of the U.S. Code of FederalRegulations Part 1910.1200. A safety data sheet (SDS) is not required for the product as such or indownstream use. This SDS is provided as a convenience to the user and was prepared per the GloballyHarmonized System of Classification and Labelling of Chemicals (GHS) format as adopted by the U.S.Occupational Safety and Health Administration.Section 2 – Hazard(s) IdentificationGHS Classification:GHS Signal Word:GHS Hazard Statements:GHS Hazard Symbols:Non-hazardousNot applicableNot applicableNot applicableSection 3 – Composition/Information on IngredientsProduct consists of modified cellulose cement applied as collation media over low carbon steel staplesor brads. Staples or brads may be either brite or galvanized wire – 18ga, 16ga, 14ga, etc. Product asprovided is a composite of several non-hazardous solid materials.Hazardous Component CAS-No. Weight %None --- ---Page 1 of 4

Section 4 – First-aid MeasuresDescription of Necessary Measures:Eye Contact:Skin Contact:Inhalation:Ingestion:Information presented in this section relates topotential contact injuries from use of this product withinstallation tools.Flush eyes with water for at least 15 minutes, obtainimmediate medical attention.If skin is punctured, obtain immediate medical attention.Not a relevant exposure pathway.Not a relevant exposure pathway.Most Important Symptoms/Effects: Acute effects are tissue injuries from significant, directcontact with the eyes or skin. Delayed effects are notexpected with appropriate medical attention to acute effects.Indication of Immediate MedicalAttention & Special Treatment, if any: Obtain immediate medical attention for contact injuries.Section 5 – Fire Fighting MeasuresSuitable Extinguishing Media:Specific Hazards:Special Protective Equipment& Precautions for Fire-fighters:Water spray, foam, carbon dioxide or dry chemical.Thermal decomposition (combustion) may produce carbonmonoxide, carbon dioxide, and complex hydrocarbons.Self-contained breathing apparatus in confined spaces.Section 6 – Accidental Release MeasuresPersonal Precautions, ProtectiveEquipment & Emergency Procedures: Not applicable for this solid product.Methods & Materials for Containment& Cleanup:Not applicable for this solid product.Section 7 – Handling and StoragePrecautions for Safe Handling:Conditions for Safe Storage, includingIncompatibilities:No special handling procedures required.Store in dry place to maintain product integrity.Section 8 – Exposure Controls/Personal ProtectionExposure Limits:Engineering Controls:Individual Protection Measures:Not applicable for this solid product.Ensure adequate air exchange when used with installation tools.Wear safety glasses when used with installation tools.Provide first-aid supplies for significant contact injuries.Page 2 of 4

Section 9 – Physical and Chemical PropertiesAppearance: Solid Upper/Lower Explosive Limits: Not applicableOdor: None Vapor Pressure: Not applicableOdor Threshold: Not applicable Vapor Density: Not applicablepH: Not applicable Relative Density (H 2 0=1): 7.3 to 7.8Melting Point/Freezing Point: > 2500ºF (steel) Solubility: NegligibleInitial Boiling Point/Range: Not applicable Partition Coefficient (Oct/H 2 0): NegligibleFlash Point: Not applicable Auto-Ignition Temperature: Not applicableEvaporation Rate: Not applicable Decomposition Temperature: approx. 300ºFFlammability: Solid cellulose Viscosity: Not applicablecement will burn.Section 10 – Stability and ReactivityReactivity:Chemical Stability:Possibility of Hazardous Reactions:Conditions to Avoid:Incompatible Materials:Hazardous Decomposition Products:No significant reactivityStableNo significant possibilityExtreme heatStrong acidsComplex hydrocarbons at temperatures above 300 ºF.Section 11 – Toxicological InformationToxicological Effects:None expected from the product as sold.Likely Routes of Exposure:Eye or skin contact when used with installation tools.Symptoms Related to Physical, Chemical,and Toxicological Characteristics: None expected from product as sold.Delayed & Immediate Exposure Effects: None expected from product as sold.Chronic Exposure Effects:None expected from product as sold.Numerical Measures of Toxicity: Not applicableCarcinogenicity:Not applicableSection 12 – Ecological InformationEcotoxicity:Persistence and degradability:Bioaccumulative Potential:Mobility in Soil:Other Adverse Effects:None expected from this insoluble, solid product.Product will persist with very limited degradability.Not applicableNot applicableNone identifiedPage 3 of 4

Section 13 – Disposal ConsiderationsProduct is non-hazardous but unused product must be properly disposed of or recycled in accordancewith all applicable federal, state, and local regulations.Section 14 – Transport InformationProduct is not regulated as a hazardous material or dangerous good in any mode of transportation.UN Number:UN Proper Shipping Name:Transport Hazard Classes:Packing Group:Environmental Hazards:Bulk Transportation Requirements:Special Transportation Precautions:Not applicableNot applicableNot applicableNot applicableNot applicableNot applicableNot applicableSection 15 – Regulatory InformationThere are no safety, health, and environmental regulations specific to this product.Section 16 – Other InformationHazardous Materials Identification System (HMIS) Ratings:Health: 0Flammability: 0Physical Hazard: 0Personal Protection: See Note below.Hazard Ratings: Severe to Minimal (4 to 0)Note: Personal Protection rating to be supplied by user depending on conditions of use. Wearsafety glasses when using this product with installation tools.Date Prepared: July 13, 2014Prepared By:Paslode Product Safety DepartmentDisclaimer of Expressed and Implied WarrantiesThe information in this document is believed to be correct as of the date issued. However, no warrantyof merchantability, fitness for any particular purpose, or any other warranty is expressed or is to beimplied regarding the accuracy or completeness of this information, the results to be obtained from theuse of this information or the product, the safety of this product, or the hazards related to its use.This information and product are furnished on the condition that the person receiving them shall makehis own determination as to the suitability of the product for his particular purpose and on thecondition that he assumes the risk of his use thereof.Page 4 of 4