KD4-1000-Operators-Manual-7-17-12

More documents

Recommendations

Info

HOW TO ADD A SAVED DIEUp to 50 different dies can be saved in the computer memory. Thesedies can be recalled in the set up process eliminating the need to reenterthe die size each time.To enter a saved die:• From the OPTION screen, press SETUP MODE.• Select SAVED DIES.• Select the save position (1-50) where the die is to be saved andpress the EDIT button.• Enter a die description (up to <strong>12</strong> alpha/numeric characters).• Enter diameter units (inch or metric).• Enter the closed diameter of the die.• Press SAVE and EXIT.The saved die will now appear on the SELECTED DIEscreen. From this screen individual dies can be cleared or edited.HOW TO RECALL A SAVED DIE• Select CRIMP TO DIAMETER, and from the OPTION screen,select USE SAVED DIE.• Select the saved die (1-50) and press LOAD and then OK.The die parameters will now be used for the crimp process.• From the ENTER CRIMP screen press MANUAL.• The saved die will now be shown on the crimp parametersscreen.8
HOW TO ADD A SAVED CRIMP• Adjust the die diameter and crimp diameter as required andplace the crimper in MANUAL mode.• Press SAVE.• Select a location (1-100) and press EDIT.• Enter a description (up to <strong>12</strong> characters).• Press SAVE and EXIT.The die and crimp setting can now be recalled from thesaved location as required.TO RECALL SAVED CRIMP• Select USE SAVED CRIMP from the option screen.• Select a previously saved crimp from location 1-100.• Press LOAD.The saved crimp will appear on the manual screen.9
Page 2 and 3: SAFETY PRECAUTIONSREAD INSTRUCTIONS
Page 4 and 5: CRIMPER SPECIFICATIONS AND INITIAL
Page 6 and 7: ACT TM CONTROLLER QUICK STARTWhile
Page 10 and 11: FULL AUTO MODEWith the crimper in F
Page 12 and 13: ACT TM ADDITIONAL FEATURESPre-Loade
Page 14 and 15: INITIAL SET UP AND PLC RESETInitial
Page 16 and 17: EXPLODED PARTS VIEW57CC1000 SHEET M
Page 18 and 19: EXPLODED PARTS VIEWCC1000 PROTECTIV
Page 20 and 21: EXPLODED PARTS VIEW32415876CC1000 M
Page 22: KD1000 WARRANTYCustomCrimp “No-No

KD4-1000-Operators-Manual-7-17-12

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?