11.07.2015 Views

Ground Fault Protection - engineering site - Schneider Electric

Ground Fault Protection - engineering site - Schneider Electric

Ground Fault Protection - engineering site - Schneider Electric

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

ZSI wiring and externel supply forMasterpact NT/NW and CompactNS1600b/3200Zone selective interlockingA pilot wire interconnects a number of circuit breakersequipped with Micrologic A/P/H control units, asillustrated in the diagram above.The control unit detecting a fault sends a signal fromdownstream, the circuit breaker remains closed for thefull duration of its tripping delay. If there is no signalfrom downstream, the circuit breaker opensimmediately, whatever the tripping-delay setting.b <strong>Fault</strong> 1:only circuit breaker A detects the fault. Because itreceives no signal from downstream, it immediatelyopens in spite of its tripping delay set to 0.3.b <strong>Fault</strong> 2:circuit breakers A and B detect the fault. Circuit breakerA receives a signal from B and remains closed for thefull duration of its tripping delay set to 0.3. Circuitbreaker B does not receive a signal from downstreamand opens immediately, in spite of its tripping delay setto 0.2.DB117331Note: the maximum length between two devices is 3000 m.The devices total number is 100 at the maximum.External power-supply moduleIt makes possible to:b use the display even if the circuit breaker is open ornot suppliedb powers both the control unit and the M2C and M6Cprogrammable contactsb with Micrologic A, display currents of less than 20 %of Inb with Micrologic P/H, display fault currents aftertripping and to time-stamp events (alarms and trips).025173DB117332b Power supply:110/130, 200/240, 380/415 V AC (+10 % -15 %),consumption 10 0 VA24/30, 48/60, 100/125 V DC (+20 % -20 %),consumption 10 W.b Output voltage:24 V DC, power delivered: 5W/5VA.b Ripple < 5 %b Classe 2 isolationb A Battery module makes it possible to use thedisplay even if the power supply to the Micrologiccontrol unit is interrupted.Cabing precautions:b the cable length from the AD module to the trip unitmust not be longer than 10 m.Catalog NumbersExternal power-supply module24/30 V DC 5444048/60 V DC 54441125 V DC 54442110 V AC 54443220 V AC 54444380 V AC 54445Catalog Numbers Battery moduleModule BAT 24 V DC 5444642

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!