ZGOUBI USERS' GUIDE - HEP

202 Keywords and input data formatting@@@îR \\ , îwPOISSONRead magnetic field data from POISSON output¤ ², ¤÷¨ ¤ ²q ": print the field map 0-2, 0-2 2*I: print field and coordinates along trajectories¤÷¨ BNORM, XN,YN Field and X-,Y-coordinate normalization coeffs. 3*no dim. 3*Eq "TIT Title (begin with “FLIP” to get field map X-flipped) A80¤§ , ¤Number of longitudinal and transverse nodesof the uniform mesh@ \\2*IFNAME 1 Filename (normally, outpoi.lis) A80q , 2*no dim., I,3*E: as for CARTEMES cm [,2*no dim., [,3*E,etc.]cm, etc.]O ´ , , , Integration boundary. Ineffective when ¤ O C\. Ž¤ ¡ , ¡ ), ² ) ² -1, 1 or Ž) [´ ¤`O,etc., if ¤`O Ž@ A ) ¡ )IORDRE Degree of interpolation polynomial 2, 4 or 25 Ias for DIPOLE-MXPAS Integration step cm EKPOS, XCE, KPOS=1: element aligned, 2: misaligned; 1-2, 2*cm, rad I, 3*EYCE, ALE shifts, tilt (unused if KPOS=1)1 FNAME contains the field map data. These must be formatted according to the following FORTRANread sequence:I = 011 CONTINUEI = I+1READ(LUN,101,ERR=99,END=10) K, K, K, R, X(I), R, R, B(I)101 FORMAT(I1, I3, I4, E15.6, 2F11.5, 2F12.3)GOTO II10 CONTINUEwhere ›éQí is the longitudinal coordinate, and úé í is the component of the field at a node éQí of the mesh.“ ’s and ) ’s are variables appearing in the POISSON output file outpoi.lis, not used here.