Liquid Handling

Dispensette ® III / OrganicRemote Dispensing SystemLiquid HandlingRemote Dispensing System for Drum Dispensingfor Dispensette ® III and Dispensette ® Organicn Dispense accurate volumesdirectly from drums and bulkrefillsn The Dispensette ® can be mountedon a wall, a ring stand or onlab furnituren A filter in the drum adapter minimizesrisk of contaminating highpurityreagentsn A quick-release connector withintegrated valves allows quickchanging of the bulk containern The remote dispensing systemallows storage of the drum up to10 meters (30 feet) away fromthe Dispensette ® . The max.delivery height is approximately1.2 m.Standard supply:without Dispensette ® , for drums with 3/4" inner thread,consisting of:A) Plug-in adapter, PTFE (only for Dispensettes ≤ 10 ml)B) Thread adapter, PP (GL 45/32)C) Strain relief, PPD) Locking screw, ETFEE) Wall mounting unit, PPF) Thread adapter, PP (GL 32/28)G) Filling tube, FEP, 3 m, outer Ø 7.6 mmH) Mounting screw, PTFEI) Locking screw, ETFEJ) Coupling, ETFE, with ball valveK) Drum adapter, PTFE, for drums with inner-threadof 3/4", with ball valve (incl. closure cap)L) Membrane filter, 3 µm, non-sterileM) Filling tube, 0.47 m, outer Ø 6.9 mmEFGABCDHIJNote!Observe all Safety Instructions, Operating Exclusionsand Limitations of the Dispensette ® IIIand the Dispensette ® Organic.LKMCat. No. 7042 61* not suitable for HF and PeroxideOperating ExclusionsNever use the remote dispensingsystem:1. with SafetyPrime recirculationvalve. It has to be removedbefore use!2. for pressurized vessels3. for liquids attacking borosilicateglass, Al 2O 3-ceramic, PFA, ETFE,FEP or PTFE4. for Peroxide (due to catalyticreaction)5. for carbon disulfide (CS 2), dueto risk of explosion!AccessoriesDescription Dimensions Cat. No.Filling tube, FEP 10 m, outer Ø 7.6 mm 7042 67Filling tube, FEP 1 m, outer Ø 6.9 mm 7042 69Filling tube, FEP 1.5 m, outer Ø 6.0 mm 7042 09Filling tube, FEP 1.5 m, outer Ø 7.6 mm 7042 10Thread adapter, steelThread adapter, PTFE, for direct mounting of Dispensette ®on drumThread adapter, PTFE, to connect remote dispensing systemwith drums with GL outer threadouter thread 2",inner thread 3/4"outer thread 3/4",outer thread GL 32inner thread 3/4",inner thread GL 327042 707042 817042 82Support rod connector for wall mounting unit 7042 68Shelf clamp for wall mounting unit 7042 72Support rod connectorShelf clamp28info@brand.de