CMA-Microdialysis.pdf - somapharm.ch

12ProbesCMA 11 Microdialysis Probefor discrete areas in the CNSMicrodialysis for Basic ResearchORDERING INFORMATIONCMA 11 Microdialysis Probe3/pkgAvailable membrane:Cuprophane, 6000 Daltons cut-offRef. No.Membrane length1 mm 83095812 mm 83095823 mm 83095834 mm 8309584THE CMA 11 MICRODIALYSIS PROBE possesses greater spatial resolution and causes less tissuedamage due to its reduced size. The probe has a cuprophane membrane with an outside diameter of0.24 mm. The outer steel shaft diameter is 0.38 mm. The inner cannula is constructed of fused silicacoated with polyimide. The inlet/outlet capillaries are mounted in a yellow plastic body matched to thesize of a corresponding guide cannula. Once implanted, the probe sits tightly in the guide cannula´scapsule without the need for screwing or cementing. FEP tubing is connected to the probe using tubingadaptors (see accessories, page 18-19).The CMA 11 Microdialysis Probes are guaranteed for single use. Complete instructions are includedin each package.OutletInletSteel shaftTECHNICAL INFORMATIONStainless-steel shaft diameter 0.38 mmShaft length14 mmMembrane diameter0.24 mmInlet internal volumenegligibleOutlet internal volume 1 µLScale 1:1Membrane• Small diameter • High spatial resolution • Minimal tissue damage• Low internal volume