YE Data YD-380 5.25 inch HH HD Floppy.pdf

6. In step 5 above, move the stepper according to the following:If A > B move inwardsIf A < B move outwards.7. Obtain A/B or B/A from the side 0 read output and veritythat the position error is within ±25 ~ with the CE diskconversion chart.8. Step the carriage from track 33 to track 32 and make surethe' read output, A/B or B/A, is the same as in step 7.If not, repeat step 6.9. Check that the read output from side one is within thelimits given in steps 7 and 8.10. Perform steps 3 and 4 above to check for the cat's eyesdisplay•. 11. Move the carriage out 32 steps after performing step 10,and verify that the Track 00 signal (Jl - 26) is at Lowlevel.