oscillating line - Kendrion Binder

vibratorsDimensions (mm)Type OAB513002Type OAB513001(25 51307A00)Type OAB513002(25 51307A01)approx.approx. 37,5FixingsType OAB513003(25 51607A00)Socketapprox.approx.approx.approx.can be used as vibrator when additional weight isfittedOptions/accessoriesplug-in connector toDIN EN 175301-803 (DIN 43650)form C, additional weight see page 15Example of orderOAB513002230 VAC, 50 Hzwith plug-in connectionTechnical specificationThe values apply when the housing is fixed to a relatively large mass.Additional weights > 150 g should be avoided because otherwise themaximum permissible vibration amplitude is exceeded.SizeTypeOAB513001/25 51307A00OAB513002/25 51307A01OAB513003/25 51607A00Max. permissiblevibrationamplitudes(mm)4.54.54.5Vibration amplitudewithout additionalweight 150 gs(approx. mm)1.51.5When using these devices, please read “The TechnicalBackground" and the “General Technical Information”(see page 14) first.Standard rated voltage: 230 V AC, 50 HzClass of protection: device IP 20, connection IP 00Insulation class: EVibration amplitudewith additionalweight 150 gs(approx. mm)4 - 4.5ApparentpowerP s(VA)212121Armatureweightm A(kg)0.130.130.13Total weightwithoutadditional weightm(kg)0.520.670.55We recommend our control type OCS 33 43303B00 or 3343304B00 for the individual tuning of the vibration amplitude.We reserve the right to make changes to the productdesign.Please note ordering data!Vibratorsfor single-phase alternating currentThese vibrators in flat form are AC oscillatingdrives with permanent pre-magnetisationin which the force effect of an electromagneticalternating field is used to generatea curving oscillatory motion. Theoscillating frequency is equal to the mainsfrequency.CEThe electromagnetic products fromKendrion Magnettechnik are componentsfor incorporation and operation in electricalequipment and devices. They thereforedo not fall within the remit of the LowVoltage Directive 73/23/EEC. The usermust ensure conformity with the EMCDirective 89/336/EEC by using correspondingswitching devices or controls.When using the recommended Kendrionaccessories, conformity with the EMCDirective is stated on the respective datasheets.The products are manufactured and testedaccording to DIN VDE 0580 (July 2000).www.kendrionmt.com 11