LED - Lightgraphix Ltd.
LED - Lightgraphix Ltd.
LED - Lightgraphix Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
50<br />
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk<br />
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk<br />
<strong>LED</strong> <strong>LED</strong><br />
Design: Lees Associates<br />
Project: Private Residence<br />
Product: LD12LT <strong>LED</strong> Lighttube<br />
Linear <strong>LED</strong> Products<br />
LightGraphix linear products are all made to order in the lengths required on<br />
site (<strong>LED</strong> circuits permitting).<br />
Send us a list of lengths or a drawing and what groupings you require and we<br />
can work out the sizes. If you have any questions just give us a call and will be<br />
happy to talk it through with you.<br />
<strong>LED</strong> Light Tube<br />
A very small and versatile linear <strong>LED</strong> product, it gives out a very broad and<br />
even glow at very close distances. It is a 24V DC system allowing long lengths<br />
to be powered from a single driver. See our comparison table for the maximum<br />
lengths and cut increments available.<br />
It has been used in a variety of applications which include coves, understairs,<br />
back lighting, shelving and many more.<br />
The clear polycarbonate extrusion was specifically designed for our <strong>LED</strong><br />
LightTube. This is extruded with a groove down the inside to align the flexible<br />
PCB based <strong>LED</strong>’s and keep them in the same plane. It also protects the <strong>LED</strong>’s<br />
from impacts and dust, and facilitates easy cleaning.<br />
LD12LT <strong>LED</strong> Lighttube is IP44 as standard but can be sealed to IP68.<br />
IP44 rated tubes require 25mm for end cap and termination. When manufacturing<br />
to IP68, end finishing becomes 60mm.<br />
11.5<br />
13.2<br />
DIM (see table for cut increments)<br />
IP44<br />
LD12LT and LD12LT Eco<br />
We have 2 versions available in both cool white and warm white. Standard<br />
High output and the new Eco version, which works out around half the cost of<br />
the high output. See table below for comparison:<br />
Lumens/metre*<br />
LD12LT<br />
High Output<br />
Warm white 210 lm/m<br />
Cool white 270 lm/m<br />
Watts /metre* 9 W/m 5 W/m<br />
Cut length increments 100/20mm 150/30mm<br />
<strong>LED</strong> centres 20mm 30mm<br />
Warm White 2750K<br />
Cool White 4000K<br />
Voltage 24V<br />
Max Length ** 4000mm **<br />
LD12LT/Eco<br />
Eco Output<br />
Warm white 120 lm/m<br />
Cool white 155 lm/m<br />
Min Bend Radius 2m (6m in horizontal plane)<br />
* these figures were correct at time of printing, but with the advances in<br />
<strong>LED</strong>s, they will most likely change. Please check our website for latest<br />
output figures.<br />
** please consider transport and the practicalities of installing long lengths.<br />
Use with 24V Drivers on pages 86-87<br />
51