LED - Lightgraphix Ltd.

70
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
LED LED
Design: dpa lighting consultants
Project: The Europe Hotel, Ireland
Product: LD35/LB/IP68
LD35 & LD235 – Lensed LED Linear System
This linear LED system uses collimating lenses to focus the LED light, with
various beam angle optics available. The two part extruded aluminium system
is custom made, with 50mm and 75mm spacing of the LED’s most common.
Depending on what effect is required a broad spread of light using 8x25 lens or
defined cones depending on the lens.
LD35 and LD235 are available with a clear cover over the lenses as well as
correction or colour filter gels. This is a custom built system to suit the
application, so spacing between LED’s is optional from a minimum of 40mm.
Maximum overall length of 5 metres although practicalities of transport and
installation need to be considered.
The system is custom made to each project’s requirements.
The specifier selects:
l 1W or 2W LED’s
l LED Colour
l LED spacing – 50, 75, or 100mm
l Lens option
l Finish
l Mounting method
l Lengths required
Mounting Method – There are 2 options – if you have a particular
requirement please send us a drawing (they speak a thousand words!) and call
us to discuss.
Method 1
LD35/235 attached to the mounting surface by 2 screws passing through the
front face. Specify Dim.
26.7
35
DIM
13 2 2
71