LED - Lightgraphix Ltd.

62
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
Telephone 01322 527629 Email light@lightgraphix.co.uk www.lightgraphix.co.uk
LED LED
LD32 and LD232 – LED Linear System
Designed specifically for under shelf lighting, the LED’s are mounted at 30°
within a broad beam reflector. When surface mounted at the front edge of the
shelf the entire area will be illuminated but cut off on the front edge of the shelf
below.
The system is based on a 36mm x 25mm silver anodised aluminium profile with
a clear cover as standard. It can be made to custom lengths with the LED’s at
50mm or 75mm spacing.
Available with 1W (LD32) or 2W (LD232) LED’s.
35.4
25
300
102° Beam angle
Illuminates the entire shelf.
A practical maximum length is 2.5m with cable exits at intervals along the
length depending on LED spacing and circuits.
Cable
IP44
2 2
DIM
Product code LED colour LED spacing Cover Length (DIM)
LD32
LD232
Example: LD32 / LWW / 50mm / FD / 600mm
LED options
1W LEDs (350mA) LD32
2W LEDs (700mA) LD232
LED colour options Suffix
Warm White (2950K) /LWW
White (5000K) /LW
Blue /LB
Green /LG
Red /LR
Amber /LA
RGB /RGB
RGB Tri Chip (use 75mm spacing) /RGBT
LED spacing Suffix
50mm /50mm spacing
75mm /75mm spacing
Cover options Suffix
Clear cover (standard) /CC
Frosted diffuser /FD
Finish options
Silver anodised
Use with 350mA (1W) or 700mA (2W) Drivers on pages 82-85
63