CXA-0406 (CTR-1616-A) Product Specification

MESSRS :CUSTOMER'S PRODUCT NAME:TDK PRODUCT NAME:DC-AC INVERTER UNITCXA-0406Corporate Headquarters13-1,Nihonbashi 1-chome,Chuo-ku,Tokyo 103, JAPANTelephone : 03-3278-5111PREPARED BY APPROVED BY AUTHORIZED BYK.NegoroE.TakahashiK.HanabusaDWG.No.CTR-1616-D

Notices on Inverter UsePlease pay enough attention to these notices an d ensure safety design when using this product.There is potential risk for electrification, damage, ignition, or the like when the product is used wrong.WarningThis product generates high voltage, so do not touch it when energized.Touching could cause electrification.Caution This is a product designed to light a cold-cathode t ube. Please do not use it with other loads. Please keep this product within the limits of this specification sheet. Please do not keep this product in an envi ronment accompanied with dust, gas corrosion, etc(salt, acid, alkali, e tc).Since this product generates high voltage, ple ase be sure to mark to alert users when there is apossibility for them to touch.Please provide a sufficient f ail-safe when you use this product for medical equipment directly affectinglife, or to control transportation equipm ent taking charge of life, because this is a product designed foruse in general electronic equipment.Please avoid use in an environme nt accompanied with high temperature, high humidity, dust, gascorrosion (salt, acid, alk ali, etc).Also, please use it in a way to avoid condens ation. It could cause damage or electrocution.For a product with no built-in protection circuit (element, fuse, etc), we recommend use of a fuse inthe input stage to prevent smoking or ignition at the time of an abnormal operation. For a productincorporating a built-in protection circuit (element, f use, etc), it is also possible for the built-inprotection circuit not to function due to d ifferences in the operating condition, voltage source capacity,etc, so we recommend use of an appropr iate individual protection circuit in such cases.Please use the product within the spe cified limits of input voltage, output power, output voltage, andoperating temperature range.Use b eyond the specified limits could cause damage, etc.Please implement measures against su rge voltage such as by lightening. Abnormal voltage couldcause damage, etc.Please consider measures to kee p foreign materials from entering after installation to prevent a failuredue to short in the high-tension part. This product is not designed for radiation hardiness.Caution for handlingAs this product uses fine wire, please be careful n ot to cut the wire, paying attention to thefollowing points. It could cause damage, etc.Please refrain from stacking the products.Please do not touch the product with tools or the like.Please do not apply excessive force during installat ion.It could cause damage, etc such as chipcracks.Provide clearance betw een the high-voltage section of this product and the frame body on which theproductis installed and also the conductor section as per listed on section [1] "Outline".When dropped, the part coul d be damaged, so please do not use it.Should you use it, please make sure sufficiently tha t there is no abnormality in the product.TDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D1/8TSB-08-01-05(00) FORM-6(A4)

Absolute Maximum RatingsElectrical specifications Reliability Test7-1Test Cond.7-2. Std Warranty7-3. MTTF TDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D2/8TSB-08-01-05(00) FORM-6(A4)

Product Outline This product is a 2-lamp inverter and has dimming functions and remote functions. Alarm output function and shutdown function are incorporated as protection circuits. he high voltage generating section is coated with silicone as a measure against dust.This product is conformity to RoHS directive.()Conformity to RoHS Directive:This means that, in conformity with EU Directive 2002/95/EC,lead, cadmium, hexavalent chromium, and specific bromine-based flame retardants, PBBand PBDE, have not been used,exceptfor exempted applications.[1]External appearance/structure and dimensions1-1. External dimensions, pin layout diagramFront elevation1050.5970.5Label markingOur product name, lot no., and country of origin aremarkedSilicone(4)250.5170.2CN1CXA-04065425RMADE IN JAPANCN2CN3(4)2-2.90.1Side view8.5max.Rear viewpart generating high voltageDimensions in mmWeight: 20.0g (Typ.)a:(58mm)part generating high voltage (all the 58mm part from the edge of the board)Please secure 2mm or longer space distance from the high voltage generating area in all directions. Please see Note 1-3 for the details.No. Product nameType name / material Quantity Printed wiring board PWB Composite (CEM-3) 1Input connector CN1Output connector CN2,353261-0771SM02(8.0)B-BHS-1-TB(LF)'SN)12RemarksUL94V-0 t=1.0MOLEXJSTRecommended conforming connector-51021-0700BHR-03VS-1TDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D3/8TSB-08-01-05(00) FORM-6(A4)

[2] Absolute maximum ratingItem Symbol Spec Unit RemarksInput votageVin06VDCLoad resistanceRL55kOperatingtemperature rangeTa-100Storagetemperature rangeTs-3085Humidity rangeRH95%RHMaximum wet-bulb temperature to be 38No condensation to occur[3] Electrical character isticsItemSymbolVin(V)Measurement conditionVrmt(V) Vbr(V) Ta()RL1()RL2()Inspection standardMIN. TYP. MAX.UnitOutput current 1Output current 2Output current 3Iout1,25.000.054.755.255.000.0550.05031828-107018285.8 6.4 7.05.7 6.4 7.12.7 3.2 3.7mArmsInput current 1Input current 2lin0055k55k 1.28 1.75 A 0 1 mAOscillationfrequencyF153 59 65kHzDimming frequencyAlarm outputF24.755.253-100230 255 280 Hz- 0.0 0.5Alarm outputAlarm outputVst50.05055k4.5 55.5VShuts downopen-circuit voltageIinVo4.750.05 - 15 301050 1150-mAVrmsTDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D5/8TSB-08-01-05(00) FORM-6(A4)

[4] Measurement circuitVin4.75~5.25VVbr0~3VVbr=0V:(Brightness MAX.)linA -V -Vinb SWaVrmt 5VVst V -:DC voltmeter (ADVANTEST R6451A or equivalent)CN1-1,2(Vin)CN1-3,4(GND)CN1-5(Vrmt)CN1-7(Vbr)CN1-6(Vst)1IC147 8CN2-1(VHIGH)CN-1(VHIGH)CN3-3(VLOW)CN2-3(VLOW)A~RL2Iout2A~RL1Iout1F1FF2F1000:1V~Note 4-1.To be the one to operate as follows by ON-OFF of SW.SWaUnit operationOperatesNote 4-2.Measuring apparatusVA:DC ampere meter (ADVANTEST R6451A or equivalent)V :Effective value voltmeter (KEITHLEY 2001 or equivalent)F :Freuqeuncy counter (ADVANTEST R6452 or equivalent)bDoes not operateA :High-frequency ampere meter (KEITHLEY 2001 or equivalent)1000:1 :High voltage probe (Tektronix P3000 or equivalent)LCD module connection diagram (reference)DC-AC INVERTERV HIGHV LOWALCD moduleLampVrmt pin circuit (reference)CN1-1VinCN1-3Vrmt15k10k10kV LOWA10kIC1V HIGHLampPlease connect the high-frequency ampere meter to the low voltage side (VLow side).TDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D6/8TSB-08-01-05(00) FORM-6(A4)

[5] Various testsTo meet the following reliability tests.Test itemTest conditionsJudgment criteriaLow temperature exposure-40 500hLow temperature operation-10 500h Operating condition : As ratedHigh temperature exposure85 500hHigh temperature operation70 500h Operating condition : As ratedThermal shockMoisture resistance-2075 100 cycles 30 min. each40 9095%RH 500hNo defect to exist in electric characteristics andexternal appearance.Vibration1055Hz Half-amplitude 0.35mm or 49m/s 2Sweeping time : 1 min.30 min. each in X, Y, Z directionsShock980m/s 2 6ms Sine halfwaveOne time. each in X, Y, Z directionsTDK CORPORATIONNo. MATERIALS NAME QU MATERIAL REMARKPRODUCT NAME or MODEL,TITLEDC-AC INVERTER UNIT CXA-0406NAME OF DRAWINGDRAWING No.PAGECTR-1616-D7/8TSB-08-01-05(00) FORM-6(A4)