AnAffillatea - Weidmüller Interface GmbH & Co. KG
AnAffillatea - Weidmüller Interface GmbH & Co. KG
AnAffillatea - Weidmüller Interface GmbH & Co. KG
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
[1]<br />
[2J<br />
EC-TYPE EXAMINATION CERTIFICATE<br />
<strong>Co</strong>mponent intended for use onlin equipment or protective system<br />
intended foe use in Potentially Explosive Armospheres<br />
Directive 94/9/EC<br />
[3] EC-Type Examination Certificate Number: DEMKO 03 ATEX 134439 U<br />
[4] <strong>Co</strong>mponents; Printed Circuit Board Terminal Blocks Type TOP 1,S/GSI ..<br />
(for models see Schedule)<br />
[5] Manufacturer: <strong>Weidmüller</strong> <strong>Interface</strong> <strong>GmbH</strong> & <strong>Co</strong>.<br />
[6] Address: Klingenbergsuaße 16,32758 Detmold, Germany<br />
[7J This <strong>Co</strong>mponem aod aoy acceptable variation therero is specified in the schedule to (his certificate<br />
aud the documems (herein referrcd to.<br />
[8] UL International Demko AIS, notified body number 0539 in accordance wirh Artide 9 of the<br />
<strong>Co</strong>uncil Directive 94/9/EC oE 23 March 1994, certifies that this component has been fallod to<br />
comply with the Essential Health and Safety Requirements relating to design and construction of<br />
componems intended for use in potentially explosive atmospheres given in Annex 11 to the<br />
Directive.<br />
The examination and test resuhs are recorded in confidential test report no. 134439.<br />
[9] <strong>Co</strong>mpliance with the Essential Health and Safety Requirements has bccn assuf(~J by compliance<br />
with:<br />
EN 50014, 1997 EincI. Ai+A2 EN 50019, 2002 E EN 50281-1-1,1998 E<br />
[101 The sign "D" placed after the certificate number indicates that this certificate mustnot be misraken<br />
fm a certificate intended far an equipmem or protective system. This partial certification may be<br />
t1sed as a basis for ccrtification of an equipment or protective system.<br />
[11] This EC-Type examination certificate rdates only to the design, examination anJ te.•• ts of the<br />
specified component in accordance with the Directive 94/9/EC. Further requiremenrs of the<br />
Directivc apply to the manufacruring process and supply of this componenr. These are not covered<br />
by this certificate.<br />
[12] The marking of the component shall include the following:<br />
G II 2 GD EEx e II<br />
01~~I,IL Intemational Oemko AIS<br />
~ristiansen<br />
Certification Manager<br />
UL International Demko AlS Cmifi"", 03 ATEX 134439 U ®<br />
Herlev, 2003·06-10<br />
An Affilia" 01 "\<br />
~~-~;;g'~~~~~e;~~rk ------------ VL Underwriters<br />
Telephone: +45 44856565 enrr:;:r~i~~:I:::~~~t~~;~~~~~~~:i~<br />
LaboratoriBS Inc.~<br />
Fax:+45441:J5ö5UlI
[131 Schedule<br />
[14] EC-TYPE EXAMINATION CERTIFICATE No.<br />
DEMKO 03 ATEX 134439 U<br />
[15] Description<br />
Printed Circuit Board Terminal Blocks type TOP L5/GS/ .., for the connection of copper<br />
conductors to electronic circuit on printcd circuit boards which are installed in endosures<br />
in type of explosion proteetion increased safety "e". Thc insulating parts are made of<br />
Wemid.<br />
Thc ambiem temperaturc range is ·20 oe .. +100 oe.<br />
Elecrrical data<br />
Type:<br />
TOP 1.5/GS/1...12/180/5,0<br />
TOP 1,5/GS/1...12/180/5,08<br />
TOP 1,5/GS/1 ... 12/90/5,0<br />
TOP 1.5/GS/1...12/90/5.08<br />
TOP 1.5/GS/1. .12/180/7.5<br />
TOP 1,5/GS/1...12/18017,62<br />
TOP 1,5/GS/1...12/90/7,5<br />
TOP 1,5/GS/J...12/90/7,62<br />
Ratcd voltage<br />
175 V<br />
275 V<br />
Rated conductor cross section for all above mentioned types is 1,5mm (14 AWG).<br />
Rated eurrem:<br />
Mouming insrructions<br />
Primed Circuit Board Terminal Blocks type TOP L5/GSI .., are suitable fot application in endosures in<br />
atmospheres wirh ßammable gases and combusrible dust. For flammable gasc:s these endosures must<br />
satisfy the tequirements according to EN 50014 and EN 50019. Fot combustible dust these enclosures<br />
must satisfy the requirements according to EN 50281-1-1.<br />
If smaller cross sections than the rated cross section are used, the be10nging lower current has (0 be laid<br />
down in the EC-Type Examination Certificate of the compIete apparatus.<br />
Routine tests<br />
According to EN 50019, Clause 7.1.b in combination with Clause 6.1, a routine die1ectric strength test<br />
has to be carried out. This can be done on a statistical basis.<br />
[16] Report No.<br />
Project Report No.: 134439-02 (Hazardous Location Testing)<br />
UL International Demko AIS<br />
Lyskaer8,P.O,Box514<br />
OK-2730Herlev,Del1mark<br />
Telephone: +4544856565<br />
Fax: +4544856500<br />
Cmificate: 03 ATEX 134439 U<br />
Report: 134439·02<br />
IlllscerUllCatemayonlYDereproducCUlnns<br />
entirety and without any change, ~chedu[e indudcd<br />
®<br />
12A<br />
12A<br />
<strong>AnAffillatea</strong>' P 2/3<br />
UL UndBrwriters<br />
• Laboratories Ine.,
[13]<br />
[14]<br />
Drawings:<br />
Number<br />
334211,