Evolis 24 user manual - Schneider Electric

07897530EN-C0.book Page 5 Jeudi, 15. mai 2008 11:34 11Evolis descriptionFront view cradleA: BushingB: Shutter padlockingC: FoolproofD: Antidrop deviceE: Four positions contactsF: Insulation screen (for TLP sensor only)G: Current sensor TLP (option)H: Field deflectorDE31476HA12BCGFED07897530EN-REV015CreationPrinted on 2008/07/17

07897530EN-C0.book Page 8 Jeudi, 15. mai 2008 11:34 11DE31481Evolis description (cont’d)Handling1x22x11- Remove lifting ring before first operation.2- Storage location for lifting ring.StorageDE31483200605DE31482ok8 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 9 Jeudi, 15. mai 2008 11:34 11Evolis description (cont’d)Caution200608For professional use onlySchneider Electric responsabilitycannot be held liable for the informationgiven in this document200609Risk of burningRisk of explosionb before intervening on or in this device,the general power supply must be cut offb always use an appropriate voltagedetection device to confirm the absence ofthe voltageb replace all protective covers such asdoors and panels before re-energising thecircuit breaker.07897530EN-REV019CreationPrinted on 2008/07/17

07897530EN-C0.book Page 10 Jeudi, 15. mai 2008 11:34 11Circuit breaker operationsOpening operationDE31484DE31485crackb indicators move to:DE31487DE31488DE31486Closing operationb indicators move to:DE31489crack10 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 11 Jeudi, 15. mai 2008 11:34 11Circuit breaker operations(cont’d)Charging-closing cycleDE31490DE31491b indicators move to:DE31493DE31492b indicators move to:DE3149407897530EN-REV0111CreationPrinted on 2008/07/17

07897530EN-C0.book Page 12 Jeudi, 15. mai 2008 11:34 11Circuit breaker operations(cont’d)Preliminary step for opening-closingopeningcycleDE31495Preliminary stepb indicators move to:ChargingDE31496DE31499b indicators move to:ClosingDE31497DE31500b indicators move to:ChargingDE31498DE3150112 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 13 Jeudi, 15. mai 2008 11:34 11Circuit breaker operations(cont’d)Opening-closing-opening cycleDE31502Cycleb indicators move to:OpeningDE31503Opush OFFDE31505b indicators move to:ClosingDE31504DE31500b indicators move to:OpeningDE31503Opush OFFDE3150607897530EN-REV0113CreationPrinted on 2008/07/17

07897530EN-C0.book Page 14 Jeudi, 15. mai 2008 11:34 11DE31507Circuit breaker operations(cont’d)Locking circuit breaker in "O" positionby keyDE31503Opush OFFDE31506DE31508Insert one key and turn it.Circuit breaker is locked in open position.14 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 15 Jeudi, 15. mai 2008 11:34 11DE31510Withdrawable circuitbreakerRacking truck description762 134Position selector51: Mechanical opening push-button.2: Removable part position selector.3: Hole for inserting operating crank.4: Mechanical indicator of removable partposition.5: Lock for Bus section truck (option).6: Hole for padlock.7: Interlocking circuit breaker cubicle door.Moving position(racking in/out)DE31511Racked inDE31512DE31513DE31514Racked out (test position)Insertion/extraction of thecircuit breaker07897530EN-REV0115CreationPrinted on 2008/07/17

07897530EN-C0.book Page 16 Jeudi, 15. mai 2008 11:34 111 - Place the table inposition2 - Lock the table to thecradleDE31515Withdrawable circuitbreaker (cont’d)Insertion of the circuit breakerinto the cradle in cubicle3 - Unlock circuit breakerfrom extraction tableDE315164 - Insert the circuit breakerinto the cradle.Remove the extractiontable.DE3151716 07897530EN-REV01CreationPrinted on 2008/07/17

207897530EN-C0.book Page 17 Jeudi, 15. mai 2008 11:34 115 - Connect the LV plug.Withdrawable circuitbreaker(cont’d)DE31518click !6 - Close the door.DE315197 - Move the selectorto racked out position(test position).DE3152007897530EN-REV0117CreationPrinted on 2008/07/17

07897530EN-C0.book Page 19 Jeudi, 15. mai 2008 11:34 11Withdrawable circuitbreaker (cont’d)Racking in of the circuit breakerinto the cradleDE315241 - Maintain the mechanicalopening push botton.2 - Turn the selector tomoving position.DE31525Conditions:b cubicle door closedb earthing switch openb no locking3 - Insert crank and turnuntil stop in racked inpostionDE315264 - Be sure that the crankhas completely finished itsmovement and is in the stopposition.Then remove crankand turn selector to theracked in position.DE3152707897530EN-REV0119CreationPrinted on 2008/07/17

07897530EN-C0.book Page 20 Jeudi, 15. mai 2008 11:34 11Withdrawable circuitbreaker (cont’d)Racking out of the circuitbreaker into the cradleDE315281 - Maintain the mechanicalopening push botton.2 - Turn the selector tomoving position.DE31529Conditions:b cubicle door closedb earthing switch openb no lockingb circuit breaker open3 - Insert crank and turnup to stop in positionracked out.DE315304 -Make sure that the crankhas completely finished itsmovement and is in the stopposition.Then remove crankand turn selector to theracked out position.DE3153120 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 21 Jeudi, 15. mai 2008 11:34 111 - Open the cubicle door.Withdrawable circuitbreaker (cont’d)Extraction from the cradle incubicleDE315322 - Disconnect the LV plug.DE315332Make sure that the LVplug is disconnectedbefore extraction ofcircuit breaker.13 - Place the table inposition.4 - Lock the table tothe cradle.DE3153407897530EN-REV0121CreationPrinted on 2008/07/17

07897530EN-C0.book Page 22 Jeudi, 15. mai 2008 11:34 115 - Turn the selector tothe extraction position.DE31535Withdrawable circuitbreaker(cont’d)6 - Extract the circuitbreaker from the cradle.DE315367 - Turn the selectorto racked out position(in order to lockthe circuit breaker tothe table)DE315378 - Close the door.DE3153822 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 23 Jeudi, 15. mai 2008 11:34 11Withdrawable circuitbreaker(cont’d)Extraction from the cradle onthe ground.1 - Unlock the antidropdevice with a screwdriverDE315392 - Extract the circuitbreakerDE3154007897530EN-REV0123CreationPrinted on 2008/07/17

07897530EN-C0.book Page 24 Jeudi, 15. mai 2008 11:34 11Before the first operationA general check only takes a few minutesand eliminates all risk of incorrect actiondue to a mistake or carelessness.It is recommended:b for the first operationb after equipment has been energised fora long timeAll checks should be conductedon a de-energised device assembly.Status of the connections andauxiliaries assemblyCheck the assembly and the tightening ofpower connections.Check that auxiliaries and accessories arecorrectly installed:b electrical auxiliariesb terminalsb auxiliary circuit connections.OperationCheck the operation of:b contact openingb contact closing.In addition the truck is equipped with adevice that allows circuit breaker racking into be interlocked with the cubicle door:- It is only possible to rack in the circuitbreaker if the door is closed.- The door can only be opened with thecircuit breaker racked out.DE31541If this interlocking function is not required,it must be inhibited by the mean of a pin.Lateral version:Remove lifting ring as describe on page 7.24 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 25 Jeudi, 15. mai 2008 11:34 11Before workingon the deviceDrawout circuit breakerDE31544DE31542DE31543Fixed circuit breakerDE31543DE3154407897530EN-REV0125CreationPrinted on 2008/07/17

07897530EN-C0.book Page 26 Jeudi, 15. mai 2008 11:34 11Preventive maintenanceForewordBefore any operation:b open the deviceb extract the device from its cubicleb cut-off power supply to auxiliary circuitsand to the main circuitb discharge the operating mechanism ifany.......The device is designed to operate for 10years or 10000 operations under normalconditions of use according to IEC 60694.We recommend the followin actions:b 1 O-C operation every year at leastb 1 visual inspection every five years atleast to be agreed with Schneider servicecentres.In specific operations conditions(dust, polluted atmosphere, high humidity...),we recommend the following maintenance operations:For circuit breakerDescription Action Supplies ToolsPole dust the pole clothArcing contactwear degreemeasure degree ofwearOperating mechanismspring guide clean with degreasingagentgreasing, oilingoperatingmechanism unitlatching mechanismand linkingoverall cleaninggreasing, oilingcleaning with adegreasing agentgreasing,oilingsee drawing page 24unchlorinated solventdegreasing agentvacuoline oils 133 oilIsoflex Topas L152vacuoling oils 133 oilIsoflex Topas L152unchlorinated solventdegreasing agentvacuoling oils 133 oilIsoflex Topas L152gaugeblockclothbrushclothbrush,oilerclothbrush,oilergear motor greasing Isoflex Topas L152 brush26 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 27 Jeudi, 15. mai 2008 11:34 11Preventive maintenance(cont’d)For circuit breaker (cont’d)Description Action Supplies ToolsPole operating mechanismcleaning with aclothdegreasing agentgreasing,oiling vacuoling oils 133 oilIsoflex Topas L152brush,oilerCircuit breaker clustersclean with adegreasing agentchlorine-freedegreasing solventclothgrease Amblygon TA 15/E2 brushMeasuring degree of wearDE315454 mm mini*4 mm*If < 4mm contact Schneider service.07897530EN-REV0127CreationPrinted on 2008/07/17

07897530EN-C0.book Page 28 Jeudi, 15. mai 2008 11:34 11Preventive maintenance(cont’d)For withdrawable circuit breaker and cradleDescription Action Supplies ToolsCradleShutter raising rollerShutter vertical rod,clean with adegreasing agentgreaseclean with adegreasing agentgreasefingers in the bushingsclean with adegreasing agentchlorine-freedegreasing solventIsoflex Topas L152greasechlorine-freedegreasing solventIsoflex Topas L152greasechlorine-freedegreasing solventclothbrushclothbrushclothgrease Amblygon TA 15/E2 brushRacking truck / propulsionLinear camEndless screwwheel axlesclean with adegreasing agentgreaseclean with adegreasing agentgreaseclean with adegreasing agentgreasechlorine-freedegreasing solventIsoflex Topas L152greasechlorine-freedegreasing solventIsoflex Topas L152greasechlorine-freedegreasing solventIsoflex Topas L152greaseclothbrushclothbrushclothbrush28 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 29 Jeudi, 15. mai 2008 11:34 11Corrective maintenanceForeword The operations listed in the table below canbe conducted by the customer or bySchneider Electric service agent.After each operation, conduct electrictests according to the standards inforce.Careful: when conducting replacements,all the following accessories mustimperatively be replaced with new parts.b Nylstop (self-stopping nut)b Contact washerb Stop ringb Mechanical pinOrdering andreplacing sparepartsA: adaptation (adding new function).R: replacement (replace existing component).b For description of fonctions orordering: see sales product catalogue.b For installation: see installationguide.For withdrawable circuit breaker accessoriesFonctions Carried out by A ROperating mechanism auto-discharge Schneider X XLV plug Interlocking kit Schneider XRacking device Schneider X630-1250-2500A arms Schneider or End user X X630-1250-2500A clusters Schneider or End user X XEarthing sliding contact Schneider or End user X X630-1250-2500A bushings Schneider or End user X XBlock of 4 auxiliary contacts Schneider or End user X XCurrent sensor (TLP type) Schneider or End user X XField deflector (for bushing) Schneider or End user X XAnti drop kit Schneider or End user X07897530EN-REV0129CreationPrinted on 2008/07/17

07897530EN-C0.book Page 30 Jeudi, 15. mai 2008 11:34 11Corrective maintenance(cont’d)For fixed circuit breaker accessoriesFonctions A R Carried out byOpen circuit breaker locking kit X X Schneider or clientShunt opening release X X SchneiderX ClientUndervoltage release X X SchneiderX ClientRemote control X SchneiderMotor X Schneider or clientGear reducer X Schneider or clientShunt closing release X Schneider or clientAnti-pumping relay X Schneider or clientOperating counter X X SchneiderMicroswitch SE X Schneider or clientEnd charging contact M1 M2 M3 X Schneider or clientLV plug (for fixed circuirt breaker) X X Schneider or client30 07897530EN-REV01CreationPrinted on 2008/07/17

07897530EN-C0.book Page 31 Jeudi, 15. mai 2008 11:34 11Notes07897530EN-REV0131CreationPrinted on 2008/07/17

07897530EN-C0.book Page 32 Jeudi, 15. mai 2008 11:34 11Notes32 07897530EN-REV01CreationPrinted on 2008/07/17

CreationPrinted on 2008/07/17

The Schneider group service centres are at your service for:engineering and technical assistancecommissioningtrainingpreventive and corrective maintenanceadaptationspare parts.Contact your sales representative who will putyou in touch with your nearestSchneider group service centreor call us on 33 (0)4 76 57 60 60 (Grenoble, France).Schneider Electric Industries SASAddressElectrical distributionF-38050 Grenoble cedex 9Tel. : +33 (0)4 76 57 60 60Fax: +33 (0)1 47 51 80 20http://www.schneider-electric.comRCS: Nanterre B 954 503 439As standards, specificiations and designsdevelop from time to time, always ask forconfirmation of the information given inthis publication.This document has been printed onecological paper.Design: Technical documentation department,Medium voltage, Varces, France.07897530EN © 2008 Schneider Electric - All rights reservedN°AAA1009307897530EN-REV0105/2008CreationPrinted on 2008/07/17