Sanitary Tanks

S A N I TAR Y V E S S E L SSanitary Tank MixersBioTech Mixing SystemsMIXER OVERHEAD DRIVECAT. NO.2653Pre-engineered, ready-to-use mixerpackages, Saint-Gobain PerformancePlastics BioTech mixer overhead drivesand lower assemblies/shafts and impellershave been specially designed to delivermaximum mixing efficiency. Each componenthas been carefully chosen tomatch a specific Saint-Gobain PerformancePlastics mixing vessel. Use them withthe closed-dome bio tanks (Cat. No. 2650)and sanitary conical-bottom processingtanks (Cat. Nos. 2690/2691). Requires2" sanitary connection (2661-0200) at10°< (for conical units), 2" silicone gasket(2672-0200) and true union (2670-0200).Saint-Gobain Performance Plastics vesseland mixer packages are designed for liquidsand liquid slurries only. Saint-Gobaindoes not warrant them for any specificapplication, only general-purpose mixingup to these maximum limits:• Solids—20% by weight• Specific Gravity (batch)—1.2• Viscosity—500 centipoiseBioTech Mixer Overhead DrivesOverhead drives are available in twopower configurations—1/20 HorsePower and 1/8 Horse Power.Both Drives Feature:• Autoclavable in-place• Variable speed controls for betteraccuracyCat. No. 2653 -0001 -0002Electrical requirementsPower (W)RPMHPLOWER ASSEMBLY/SHAFTCAT. NO.2654115V/60 Hz/1 PH4020-2501/20115V/60 Hz/1 PH11520-1401/8Lower module allows for use with 110/220 v, 50/60 Hz and accepts a universallyavailable power cord.NOTE: Lower assemblies/shafts and impellers and mixer support (required for closed-dome tanksonly) are necessary to complete each system and are sold separately (see Cat. Nos. 2654 and 2651).• Programmable timers for hands-offcontrol• LCD readouts for speed, power, torque,impeller flow and time• Audible overload alarm1/20 H.P. (Cat. No. 2653-0001)• 75-liter closed-dome tanks• 30- and 50-liter sanitary conicalbottomprocessing tanks1/8 H.P. (Cat. No. 2653-0002)• 30-, 50-, and 100 gallonclosed-dome tanks• 100-liter sanitary conical-bottomprocessing tanks• 200-liter sanitary conical-bottomprocessing tanks• Can be used interchangeablywith all sanitary units under 200L.Lower Assemblies/Shaftsand Impellers• For use with overhead drive• 316 stainless steel shaft• 316 stainless steel axial-flow impellers• Autoclavable• Encapsulated assemblies available—non-metallic wetted surfaces• Attaches to 2" connection withtrue union and gasketLOWER ASSEMBLIES/SHAFTS AND IMPELLERSCat. No. For Use With Overhead* Drive Shaft Length Shaft Diameter Impeller Diameter ImpellerCat. No. (in., mm) (in., mm) (in., mm) Material2654-0030†30-gallon closed-dome bio tank (2650-0030)2653-000230; 7621/2; 136.8; 173Stainless Steel2654-003130- and 50-L sanitary conical tanks(2690/2691-0030, -0050)2653-000117; 4321/2; 136.1; 155Stainless Steel2654-0055†55-gallon closed-dome bio tank (2650-0055)2653-000232; 8131/2; 138.8; 224Stainless Steel2654-0075†75-L closed-dome tank (2650-0020)2653-000123; 5841/2; 136.3; 160Stainless Steel2654-0101100-L sanitary conical tank (2690/2691-0100)2653-000228; 7111/2; 136.1; 155Stainless Steel2654-0100†100-gallon closed-dome bio tank (2650-0100)2653-000238; 9651/2; 1310; 254Stainless Steel2654-0201200-L sanitary conical tank (2690/2691-0200)2653-000236; 9141/2; 138.8; 225Stainless Steel22* The 2653-0002 is appropriate for use with all tanks. †Requires mixer support (2651-0200).