RC702-FE Ethernet over SDH Device Command notebook (V1.0)

More documents

Recommendations

Info

Raisecom Technology Co., Ltd6. Run other configuration commands related to protocols and port.Note: when configure router through Telnet, do not change Ethernet IP address rashly, ifnecessary modify it after confirming other parameters.1. User name and the password are necessary when login through CONSOLE interfaceand Telnet.2. If it is the first login, both user name and the password are admin, same as privilegeduser password.3. EOS> indicates the present mode is user EXEC, and in this mode system leveloperations are not available. Use enable command and enter the password (admin) toenter privileged EXEC.4. More commands are available in the following chapters.2.2 Introduction of Bootrom startup optionIn default case, after being powered on the device will enter startup mode withoutoperation of user.Access Bootrom menu as following steps:1 Connect to CONSOLE interface of device, note that terminal has been correctlyconfigured.2 Power on, and press ESC continuously.3 Prompt RC702 indicates you have already enter Bootrom menu.There will be Bootrom menu information after entering ?:? - print this listn- load and boot from networkf- load and boot from flashp- print boot paramsc- change boot paramse- erase flash9
Raisecom Technology Co., Ltdm- set mac addressPress '?' To get helping information.Menu options and the meanings of Bootrom:?:show help informationn:download RC702 AGENT system file through FTP protocolf:startup RC702 AGENT through system file in flash.p: show startup parametersc: configure startup parameterse: format flash.m: configure MAC address of Ethernet network management interface.2.3 Upgrade softwareDownload software of new version as the following steps through TCP/IP:1 User who has administrator privilege logins global configuration mode throughserial interface or Telnet.2 Enter the commands:RC702(config)# load ftp 192.168.1.119 program RC702 username Raisecompassword 123Loading, please wait... file length = 3574927Writing to flash, please wait..............................................................finishedYou've successfully download new image fileNow you can type reboot command to reboot system.10
Page 1: RC702-FEEthernet over SDH DeviceCom
Page 6 and 7: Raisecom Technology Co., Ltd1.4 Org
Page 8 and 9: Raisecom Technology Co., Ltd2. Afte
Page 12: Raisecom Technology Co., Ltd2.4 Res
Page 15 and 16: Raisecom Technology Co., Ltdpresent
Page 17: Raisecom Technology Co., Ltd3.2.3 C
Page 20 and 21: Raisecom Technology Co., Ltd【comm
Page 22 and 23: Raisecom Technology Co., Ltd(Type C
Page 24 and 25: Raisecom Technology Co., Ltdmotfec
Page 26 and 27: Raisecom Technology Co., Ltd4 EOS c
Page 28 and 29: Raisecom Technology Co., LtdCtrl-D
Page 30 and 31: Raisecom Technology Co., Ltd4.2.4 e
Page 34 and 35: Raisecom Technology Co., LtdUser EX
Page 36 and 37: 4.2.14 disableExit from privileged
Page 38 and 39: Raisecom Technology Co., LtdN/A【c
Page 42 and 43: Raisecom Technology Co., Ltd!【rel
Page 44 and 45: Raisecom Technology Co., LtdN/A【c
Page 46 and 47: Raisecom Technology Co., Ltd【rela
Page 48 and 49: Raisecom Technology Co., Ltd【exam
Page 50 and 51: Raisecom Technology Co., LtdDefault
Page 52 and 53: Raisecom Technology Co., Ltd-------
Page 54 and 55: Raisecom Technology Co., Ltd【rela
Page 56 and 57: Raisecom Technology Co., LtdADDRESS
Page 58 and 59: Raisecom Technology Co., Ltd4150 pa
Page 60 and 61:
Raisecom Technology Co., LtdRC702(c
Page 62 and 63:
Raisecom Technology Co., Ltd【para
Page 64:
Raisecom Technology Co., Ltd@2005 R
show all

RC702-FE Ethernet over SDH Device Command notebook (V1.0)

Create successful ePaper yourself

Delete template?

Save as template?