Operating Instructions - Electric stirrer for Ultromat - ProMinent

More documents

Recommendations

Info

4.1 MaintenanceRegularlyRepairing and maintaining the stirrers4 Repairing and maintaining the stirrers• Regularly blow clean the motor fan and the cooling fins usingclean, oil-free compressed air– The stirrers are otherwise maintenance free4.2 RepairsWARNING!Possibility of sudden start-upThe stirrers can start up abruptly once they are connectedto mains voltage via the system, even if a faultalert or exists or the system is stationary (Start/Stopkey).Remove the stirrer for repair:1. Switch the main system switch to ‘Off’ and secure to preventswitching back on2. Disconnect the motor from the mains3. Remove the flange screws4. Remove the cover of the corresponding inspection opening5. Slightly lift the stirrer and release the coupling6. You can now lift the motor off in an upwards direction7. Remove the shaft with the propeller through the inspectionopening8. Refit the stirrer after repairs are concluded by following thereverse sequence9. The inspection opening cover must now be replaced withoutfail and secured with the screw12
Technical data5 Technical data5.1 Motor dataStirrer motor of 0.18 kW (740878)Mains supply frequency 50 Hz 60 HzPower 0.18 kW 0.18 kWVoltage: 220 – 240 / 380 - 420 V 220 – 265 / 380 – 460 VCurrent: 1.47 / 0.84 A 1.27 / 0.73 ASpeed: 675 - 695 rpm 810-850 rpmcos φ: 0.59 0.64Motor type:K21R80K8Size:80 K8Mounting:IM V1 FF130Degree of protection: IP 55Weight:10.5 kgInsulation class:FMotor flange/hole circle:A 160 / 130 mmManufacturer:VEMStirrer motor of 0.25 kW (1021090)Mains supply frequency 50 Hz 60 HzPower 0.25 kW 0.25 kWVoltage: 220 – 240 / 380 - 420 V 220 – 265 / 380 – 460 VCurrent: 2.15 / 1.23 A 1.86 / 1.07 ASpeed: 685 - 700 rpm 830 - 850 rpmcos φ: 0.56 0.58Motor type:K21R80G8Size:80 G8Mounting:IIM V1 FF165Degree of protection: IP 55Weight:12 kgInsulation class:FMotor flange/hole circle:A 200 / 165 mmManufacturer:VEM13
Page 2: ProMinent Dosiertechnik GmbHIm Schu
Page 5 and 6: Introduction1 IntroductionThe elect
Page 7 and 8: IntroductionWARNING!Nature and sour
Page 9 and 10: Safety and responsibility2 Safety a
Page 11: Commissioning3.3 AssemblyNOTICE!Mou
Page 15 and 16: Technical dataStirrer motor of 1.1
Page 17 and 18: Technical data5.3 Dimensions and we
Page 23 and 24: Technical dataStirrer with 1 propel
Page 25: Index7 IndexGGeneral non-discrimina

Operating Instructions - Electric stirrer for Ultromat - ProMinent

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?