Operating Instructions - Electric stirrer for Ultromat - ProMinent

More documents

Recommendations

Info

Introduction1.2 Users' qualificationsWARNING!Danger of injury with inadequately qualified personnel!The operator of the plant / device is responsible forensuring that the qualifications are fulfilled.If inadequately qualified personnel work on the unit orloiter in the hazard zone of the unit, this could result indangers that could cause serious injuries and materialdamage.– All work on the unit should therefore only be conductedby qualified personnel.– Unqualified personnel should be kept away fromthe hazard zoneTrainingInstructed personnelTrained userTrained qualified personnelElectricianCustomer Service departmentDefinitionAn instructed person is deemed to be a person who has been instructed and,if required, trained in the tasks assigned to him/her and possible dangers thatcould result from improper behaviour, as well as having been instructed in therequired protective equipment and protective measures.A trained user is a person who fulfils the requirements made of an instructedperson and who has also received additional training specific to the systemfrom ProMinent or another authorised distribution partner.A qualified employee is deemed to be a person who is able to assess thetasks assigned to him and recognize possible hazards based on his/hertraining, knowledge and experience, as well as knowledge of pertinent regulations.The assessment of a person's technical training can also be based onseveral years of work in the relevant field.Electricians are deemed to be people, who are able to complete work on electricalsystems and recognize and avoid possible hazards independently basedon his/her technical training and experience, as well as knowledge of pertinentstandards and regulations.Electricians should be specifically trained for the working environment inwhich the are employed and know the relevant standards and regulations.Electricians must comply with the provisions of the applicable statutory directiveson accident prevention.Customer Service department refers to service technicians, who havereceived proven training and have been authorised by ProMinent to work onthe system.Note for the system operatorThe pertinent accident prevention regulations, as wellas all other generally acknowledged safety regulations,must be adhered to!8
Safety and responsibility2 Safety and responsibility2.1 General safety notesWARNING!Live partsPossible consequence: Fatal or very serious injuries– Measure: The device must be disconnected fromthe power supply before opening the housing– Isolate damaged, faulty or manipulated devicesfrom the mains in order to de-energise.WARNING!Unauthorised accessPossible consequence: Fatal or very serious injuries– Measure: Ensure that there can be no unauthorisedaccess to the deviceCAUTION!Risk of injury from the rotating propellerSlight or minor injuries.– The stirrers must not be electrically installed, untilthey have been mounted in their operating position.– The stirrer must only be operated if it has beenensured that no danger can originate from the propellers.– Switch off the system and only then remove thescrewed cover of an inspection opening2.2 Intended useNOTICE!Intended use– Only use the stirrers with an Ultromat ®– Any other use or modification is prohibited.– Only use the stirrers as described in the relevantUltromat ® operating instructions– The stirrers should only be mounted and installedby qualified personnel9
Page 2: ProMinent Dosiertechnik GmbHIm Schu
Page 5 and 6: Introduction1 IntroductionThe elect
Page 7: IntroductionWARNING!Nature and sour
Page 11 and 12: Commissioning3.3 AssemblyNOTICE!Mou
Page 13 and 14: Technical data5 Technical data5.1 M
Page 15 and 16: Technical dataStirrer motor of 1.1
Page 17 and 18: Technical data5.3 Dimensions and we
Page 23 and 24: Technical dataStirrer with 1 propel
Page 25: Index7 IndexGGeneral non-discrimina

Operating Instructions - Electric stirrer for Ultromat - ProMinent

Create successful ePaper yourself

Delete template?

Save as template?