The RF Preamp Explained for the FLEX-5000 and SDR-1000 The ...

PowerSDR you install in order to get the most optimal default settings that may have changedbetween releases.FLEX-5000: If you are using a FLEX-5000, it is fully calibrated at the factory and the data isstored to EEPROM inside the radio, so there is no need to perform a RX Level calibration. Whenyou start PowerSDR for the first time; it automatically imports or pulls the calibration data fromEEPROM into the PowerSDR database. Anytime you delete the PowerSDR.mdb database, it willre-import the FLEX-5000 calibration data from the EEPROM into the new PowerSDR databaseautomatically.This KB article may reference additional files that are available on the FlexRadio Systems web siteDownloads page. Please use the URL(s) below to download the referenced materials.An Adobe Acrobat Reader may be required to open the file. You can download Adobe Acrobatfrom here.KB Source Document(s):NoneReferencedLast Modified By: Administrator, Thursday, July 31, 2008http://kc.flex-radio.com/KnowledgebaseArticle50144.aspxThursday, June 18, 2009