at 1.881 ghz, rectangular microstrip patch antenna using split ... - ijater
at 1.881 ghz, rectangular microstrip patch antenna using split ... - ijater
at 1.881 ghz, rectangular microstrip patch antenna using split ... - ijater
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Simul<strong>at</strong>ion result of Return loss and bandwidth ofRectangular <strong>microstrip</strong> p<strong>at</strong>ch <strong>antenna</strong> loaded withmetam<strong>at</strong>erial structure is shown in Fig 11.The proposed metam<strong>at</strong>erial structure reduces the return lossby -8.107dB and increases the bandwidth up to 17.96 MHz.Intern<strong>at</strong>ional Journal of Advanced Technology & Engineering Research (IJATER)Figure13. H Field of the reduced size RMPA loaded withMetam<strong>at</strong>erialFigure 11. Simul<strong>at</strong>ion of Return loss and impedance bandwidthof RMPA with proposed metem<strong>at</strong>erial structure <strong>at</strong> oper<strong>at</strong>ingfrequency <strong>1.881</strong> GHz.The Simul<strong>at</strong>ed result of RMPA <strong>using</strong> <strong>split</strong> <strong>rectangular</strong> shapeis reduced return loss of -18.175 dB and Bandwidth of 22.5MHz.It is clear th<strong>at</strong> the Directivity of proposed <strong>antenna</strong> is almostunaffected in comparison to simple RMPA alone.Figure14. H Field of the reduced size RMPA loaded withMetam<strong>at</strong>erial.Figure 12. Radi<strong>at</strong>ion p<strong>at</strong>tern of proposed <strong>antenna</strong> showingDirectivity of 6.784 dBi.ISSN No: 2250-3536 Volume 2, Issue 5, Sept 2012 76