Download - GELEC (HK)

GULLY ASSEMBLIES FOR SHEET FLOOR COVERINGFor use in wet bathrooms, kitchen and shower areas decked with sheet floorcovering, such as vinyl of a thickness up to 3.5mm.ABS Plastic body with stainless steel or nickel bronze clamp collar and grating/cover/funnel.TRAPPED GULLY WITHVERTICAL OUTLET - 50mm seal.GV6 Series - 110mm spigot outlet with 50mm reducer.220 Dia.160 Dia.GratingClamping collar1 - Peripheral Slot 2 - Slotted Grating15710350Removabledip tubeRemovablesediment bucket50 dia.3 - Solid Cover 4 - Funnel110 dia.Dimensions shown are for GV6007Spec. Illus. Top Version Load kgCode No. Material RatingClassGV6007 1 Stainless Steel Grating (periph. slot) K3 1.1GV6103 2 Nickel Bronze Grating (slotted) L15 1.5GV6107 2 Stainless Steel Grating (slotted) L15 1.0GV6503 3 Nickel Bronze Solid Cover (gasketed) L15 1.9GV6517 3 Stainless Steel Solid Cover (unsealed) L15 1.2GV6803 4 Nickel Bronze Funnel (tapered) 101 Dia.x 100H n/a 2.4GV6817 4 Stainless Steel Funnel (parallel) 101 Dia.x 100H n/a 1.7GV6823 4 Nickel Bronze Funnel (oval) 224L x 85W x 99H n/a 3.7OPTIONSSuffixH Fitted with allen screws for security applications (not GV6007)I Tapped to provide a direct connection for waste pipes - specify size 1 1 /4", 1 1 /2" or 2" (solid cover versions only)PB Made of polished bronze ( available for nickel bronze versions only)P Polished (GV6817 is polished as standard)FEATURESWatertight - clamping collar provides a water-tight seal betweenthe flooring material and gully even when the grating is removed.Flow rate - (grating and funnel versions) rate in excess of 40l/min; comfortably exceeds the minimum rate of 24 l/min requiredby BS EN 274 for the discharge from a single shower head.Installation - ideally suited for installation in timber or concretefloors where space is limited.Note: The gully must be supported and installed inaccordance with instructions which accompany the product.33