Third Party Product Guide for C166/ST10 - Tasking

Other
Back to Table of Contents
HCC-Embedded
Vaci ut 110
Budapest 1133
Hungary
www.hcc-embedded.com
Product: Embedded products
TASKING VX-toolset: C166/ST10,
ARM
TASKING Toolset: classic C166/ST10,
68K/ColdFire
Back to Table of Contents
hse-electronic
Schauenburger Str. 116
24118 Kiel
Germany
www.hse-electronic.de
Product: FLASHit
TASKING Toolset: classic C166/ST10
HCC-Embedded specializes in embedded
firmware and embedded storage solutions.
Their range of products includes failsafe
file systems, FAT file systems, USB host and
device stacks and windows connectivity
software. HCC also provides a full product
development cycle from initial design
thorugh to low volume production.
HCC-Embedded designs a range of
specialist firmware products:
• SAFE - An entirely reliable file system for
NAND and NOR flash storage.
• TINY - An entirely reliable file system for
small-sectored flash.
• FAT - Fully featured, high performance
FAT file system
hse was founded in 1990 and operates
in the specific customers hard- and
software development with 8- and 16-bit-
MCUs (Infineon, ST) as well as fieldbussystems
(like CAN-Bus). It also operates
in the development and distribution of
programmer-tools in industrial embedded
control technologies.
FLASHit is a program-tool for programming
application software into an embedded
C16x , SDA6000 or ST10 target system with
FLASH-memory.
FLASHit:
• Guarantees the correct system setting
with the autodetect function.
• Supports all main busmodes of C16x
target systems.
• Supports the “Chip-Erase”- and the
Sector-Erase-Modes of FLASH-memories.
C166/ST10 Third Party Product Guide – Updates available from www.tasking.com/C166
• THIN - Highly resource optimized version
of FAT
• USBH - USB host stack with support
for EHCI, OHCI and non-standard host
controllers.
• EUSB - USB device stack with support for
many microcontrollers with integrated
USB and also for external USB controllers.
All HCC’s embedded products can be
supplied as full working projects using the
TASKING VX-toolsets for C166/ST10 and
ARM as well as the TASKING 68K/ColdFire
and classic C166/ST10 toolset where the
development board is available to HCC.
• Your Hex-File will be analysed so only the
needed memory is erased.
• Can be controlled by scripts, e.g., from
other applications.
• Needs only 1 kbyte internal RAM of
target processors.
• Generates automatically serial-numbers
in your target-system.
• Creates the checksum of the contents of
the FLASH-memory.
FLASHit offers for the first session of your
application various debug functions:
• Selects and saves system configuration of
the target system.
• Selects and describes the main registers
of the target processors.
• Selects the flash contents in “hex” or
“bin” files.
• Displays selected addresses of your
FLASH-Memory.
C166/ST10
27