Temaline Solutions

More documents

Recommendations

Info

Temaline Specification DataSection 5.1: Access Control SolutionsTherefore, in the example below:lllThe TemaKey # 4 is associated to thegroup of TemaKeys that manage anarea, for example the Canteen (Group 4)TemaKeys # 1 and 2 are associated tothe Group 1The control rule that is to be associatedto the terminal # 4 must verify thepreceding transit through the terminalsassociated to the Group 1123Mandatory PathIn the following example, a transit atTemaKey # 8 associated with Group 8 willonly be authorised following a transit atTemaKey # 4, associated with Group 4,and a transit at the latter, in turn, will begranted only after a transit at TemaKey # 1associated with Group 1.13SECTION 5: page 16448Timing BarrierIn this instance, the terminal verifies boththe terminal group through which the userhas transited as well as the time elapsedbetween transits before making the decisionto allow access.For example, a timing barrier can beestablished between a TemaKey associatedwith Group 8 and a TemaKey associated withanother Group – say 7. The rule associatedwith Group 8 will verify whether the user hastransited at any of the terminals associatedwith Group 7 within a configurable time (lessthen 24 hours or 1440 minutes).Note: This type of control is a multi-gatecontrol. It relies on information from severalgate control terminals and, if communicationwith one of the terminals involved isinterrupted, the control can no longerbe guaranteed. In this case, the systemautomatically degrades the functionalityand disables the control until the conditionsnecessary for reliable execution arerestored.TIME AND ATTENDANCETRANSITSThe EBI Temaline Interface provides theability to define a specific use for eachTemaKey based on the specific transactionfor which the terminal/reader will be used.These include:lllAccess ControlTime & AttendanceCanteenl SAP ®The Time and Attendance (T&A)transaction is generally used to supportT&A requirements of HR departments andpayroll. EBI Temaline provides the requiredtransactions via ASCII file, Excel file or via adatabase table.EBI Temaline allows the user to manageT&A transactions, not only covering thecompany’s employees, but also for externalpersonnel such as consultants, contractorsor employees of sister companies.Canteen TransitsEBI Temaline provides the ability to checkthe number of canteen transits allowedand executed for each cardholder per day.TemaKeys are configured specifically for thispurpose and the information is collected byEBI Temaline and then normally exportedto an external application for canteenmanagement.Reasoned TransactionsA reasoned transaction is a transaction thatincludes an associated code identifyinga specific reason in addition to the normalinformation such as the card number, thedate and time of the transit, the transitdirection and the terminal identification.Reasoned transactions are extensivelyused for T&A transactions in order to allowcardholders to identify an exceptional orunusual transit. A reasoned transaction canalso be used to send feedback to activate/deactivate the lights of an office or enable/disable the intrusion detection of an area.Length of Stay ControlsEBI Temaline has the ability to verify theamount of time that a user remains in asecurity-sensitive zone. This can be donebased on two thresholds:llHigh pre-alarm threshold: indicatesthat the user has remained in the zonebeyond the pre-alarm limitHigh alarm threshold: indicates thatthe user has remained in the zonebeyond the time limit set for the alarm.
Temaline Specification DataSection 5.1: Access Control SolutionsBehaviour modelsThis function allows the user to assignschedules to cardholders (employees,external personnel, visitors, companiesand vehicles) that reflect their accessrequirements. Behaviour Models determineuser access rights to protected areasof a facility, and consist of a time-basedcomponent (time periods and day types) andrelated TemaKeys (or readers) for accessingdoors or gates. Users can configure up to512 behaviour models.LOCALISATIONEBI Temaline provides a simple, user-friendlyprocedure for localisation and requires nospecific tool. A database table is providedcontaining all necessary character stringsin English and localisation simply requiresthat the translated text be entered into the“Customised” column as shown below.Each behaviour model can consist of up to9 blocks (or groups) of terminals and timeperiods linked to specific day types, suchas the days of the week (from Monday toSunday), holidays, and special days.SECTION 5: page 17
Page 3 and 4: Temaline SolutionsSection 5.1: Acce
Page 5 and 6: Temaline Specification DataSection
Page 15: Temaline Specification DataSection
Page 21 and 22: Control UnitSection 5.2: Access Con
Page 23 and 24: Compact Magnetic Card ReaderSection
Page 25 and 26: Modular Magnetic ReaderSection 5.3.
Page 27 and 28: Modular Magnetic Readerwith Graphic
Page 29 and 30: Proximity ReaderSection 5.3.2: Acce
Page 31 and 32: Modular Proximity ReaderSection 5.3
Page 33 and 34: Modular Proximity Readerwith Graphi
Page 35 and 36: OmniProxSection 5.3.2: Access Contr
Page 37 and 38: OmniClassSection 5.3.3: Access Cont
Page 39 and 40: OmniAssureSection 5.3.3: Access Con
Page 41 and 42: BioAccessSection 5.3.4: Access Cont
Page 43 and 44: HandKeySection 5: 5.3.5: Access Acc
Page 45 and 46: Integrated TerminalSection 5.4: Acc
Page 47 and 48: Dual Wiegand InterfaceSection 5.4:
Page 49 and 50: Power Supply ModuleSection 5.4: Acc
Page 51: Power Supply ControllerSection 5.4:

Temaline Solutions

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?