OmniAssureSection 5.3.3: Access Control – Smart Card ReadersFeaturesllllllllFlash-on-card to updatereader firmware to evolvingsmart card standardsMullion and switch platemountingADA compliant built-in audiblebuzzerTwo LEDs (red and green)Configuration cards can beused to manage security keysand change the operatingcharacteristics of the readerHidden mounting screwsdeter vandalismPotted for superior weatherresistanceWiegand outputOmniAssure Contactless Smart Card ReadersSmart card technology is ideally suited for access control, logical (PC) access, storageof biometric templates, secure IDs with embedded tamper-proof digital photos, parking,ePurse and many other applications requiring secure and reliable read/write cards.Honeywell’s OmniAssure readers combine compliance with convenience. The patent-pending‘flash-on-card’ design makes OmniAssure readers the easiest to use. With flash-on-card, thereader’s firmware can be easily updated to support changing government standards withoutremoving the readers from the wall. With other smart card readers, the configuration cards onlychange parameter settings for the currently installed firmware.OmniAssure readers can retrofit most standard Honeywell or Wiegand-output proximity systems.The readers also feature built-in-hardware to support future RS485 protocols and both the reading/writing of smart card credentials. This protects the OmniAssure solution for changing needs in thefuture.Reader versions include smart card reader only, smart card reader plus keypad, fingerprint smartcard reader, and a multi-technology smart card/prox reader. All wall-mount readers are sold asmullion mounts with optional mounting kits available.Compatible cards include:llllHSPD-12/FIPS 201 PIV II cards (endpointand transition), low-medium assuranceTWIC (Transportation Worker IdentificationCredential) cardsFRAC (First Responder AuthenticationCards)DoD CAC (Department of DefenceCommon Access Credentials)llOpen standard ISO 14443 technologies(Mifare ® Classic, DESFire ® , and SmartMX ® )125 kHz proximity technologies (includingEM4102, Hitag, and HID ® Prox)SECTION 5: page 38
OmniAssureSection 5.3.3: Access Control – Smart Card ReadersDimensionsCompatible CardsMax. Read Range 1ISO 14443A Card (Mifare ® )ISO 14443B Card(DESFire ® , SmartMX ® )OM30, OT35Smart CardMifare ® , DESFire ® , SmartMX ® , PIV II,FRAC, DoD CAC, TWICMullion: 14.2 x 4.62 x 2.5cmU.S. gangbox: 14.2 x 7.32 x 2.8cmOT31, OT36Smart Card + 125 kHz ProxMifare ® , DESFire ® , SmartMX ® ,PIV II,FRAC DoD CAC, TWIC, EM4102, Hitag,HID ® ProxOT70, OT75Smart FingerprintMullion: 19.25 x 5.05 x 4.3cmU.S. gangbox: 21.8 x 7.6 x 0.8cmMifare ® , DESFire ® , SmartMX ® , PIV II,FRAC, DoD CAC, TWIC4Up to 3cm Up to 1.1cm Up to 3cmUp to 3cm Up to 1.1cm Up to 3cm1326 ProxCard II Clam Shell N/A Up to 4cm N/A1386 ISOProx ® II PVC Card N/A Up to 2.5cm N/AISO Standard SupportData EncryptionPINBiometricsNumber of FingerprintTemplates & Size14443A, 14443BAvailable between card and reader and between reader and hostN/A4-bit burst, 8-bit burstUp to 2 templates stored on smartcard depending upon card type andfingerprint technology; 752 bytes forminutia; 350 bytes for user templatesand records 4Enrolment Time N/A < 3 secondsEqual Error Rate (ERR) N/A 0.1%; AdjustableFalse Acceptance/Rejection RatesN/AAdjustableVerification Time N/A < 1 secondRegulatory Approvals 2 UL/cUL, FCC, CE, Canada Radio* UL/cUL*, FCC, CE, Canada Radio* UL/cUL, FCC, CE, Canada Radio*Operating Temperature -20ºC to +60ºC 0ºC to +60ºCOperating Humidity 5 – 95% relative humidity, non-condensing 30-80%, non-condensingIP Rating IP67 if connector is sealed IP42, Indoor use onlyOperating Voltage Range 4.5 – 16V dc 8 – 24V dcPower Consumption 1.5 Watts average; 2.0 Watts peak 2.5 Watts average, 5 Watts peakTamper OutputOutput Interfaces (all built-in)Optional Tamper Switch AccessoryWiegand, Clock & Data, RS485/RS232/RS422Warranty 3 Limited Lifetime Limited Lifetime 2 years1Actual operating distance will vary depending upon installation environment and proximity to metal.2* = submitted/pending.3In accordance with Honeywell’s sales policy and warranty.4Fingerprints supported on Mifare ® and DESFire ® .Order CodesMullion-mount reader, silver bezel, terminal connectionMullion-mount reader plus 125kHz proximity, silver bezel, terminal connectionMullion-mount reader plus keypad, silver bezel, terminal connectionMullion-mount reader plus keypad plus 125kHz proximity, silver bezel, terminal connectionU.S. gangbox mounting kit for OT30HON, OT31HON, OT35HON, OT36HONMullion-mount fingerprint reader, silver bezel, terminal connectionMullion-mount fingerprint reader plus keypad, silver bezel, terminal connectionU.S. gangbox mounting kit for OT70HON, OT75HONTamper switch accessory for all readersNote: Contact factory for reader configuration cards to set up the reader per site requirements.OT30HONOT31HONOT35HONOT36HONIEMOUNTOT70HONOT75HONIEMOUNT2IETAMPEROmniAssure is a trademark ofHoneywell International Inc.Mifare ® , DESFire ® , and SmartMX ® aretrademarks of Philips. HID ® and ISOProx ®are trademarks of HID Global.SECTION 5: page 39