ISIS® Software for PHOENIX XT and MENTOR

Playbacks and Playback Configuration13.8.10 Exiting a running loopWhen a loop event is triggered from the playback sequence, the memories contained within the loop willbe repeated for the number of times specified, either manually of automatically.It is possible to exit a running loop at any point and continue with the list of memories in the playbacksequence.examples of keystrokes Exits a running loop.This procedure will stop the loop at its current point, and fade to the next memory (or event) in thesequence list.13.9 AutogoPart or all of a sequence list can be made to “Autogo” - to self execute without operator intervention. Forselected parts of the memory list to autogo, the autogo function is allocated to the memories concerned, inthe memories or sequence manager.Note: The autogo function for individual memories replaces the “Chain” command on earlier versions of VISION 10software.For the whole sequence list to autogo, the playback itself can be put into autogo mode.13.9.1 Autogo playbackAn autogo playback means that the whole memory list will be automatically replayed, each fade beginningas soon as the previous one has competed, subject to any wait times. The operator must press the key once to activate the whole sequence. This can be used as an easy way to operate a whole sequence within a show that is strictlytimed, or to provide continuously changing ambient lighting throughout the day for public areassuch as foyers or bars.Autogo for each playback is selected by using the key, because the autogo playback functionkey is shared with the key.Page:282Issue 1.01www.adblighting.com