ISIS® Software for PHOENIX XT and MENTOR

Motion Control SetupReset valueEnter the value at which the instrument starts to execute the reset procedure, if this function isavailable. Reset values for an instrument are given by the manufacturerIgnition valueEnter the value at which the lamp of the instrument is ignited, if this function is available. Ignitionvalues for an instrument are given by the manufacturer.DMX typeAutomatically selects “8 bit”.DMX offsetAutomatically set to “6”. This is the next available DMX channel offset.LowDisabled when “8 bit” mode is selected.Move in black – enableSelect “Enable” to allow the parameter to move while the fixture is dark.Move in black – Delay before moveThe default delay setting is acceptable for this parameter.Move in black – DMX StepThe default DMX step setting is acceptable for this parameter.Allows the default step values to be modifies if necessary.Please see the section 22.6.5 Steps adjustment for details.Cancels the modifications and returns to the Edit Parameter dialogue box.Confirms the modifications and exits the Edit parameter dialogue box.The gobo wheel parameter has now been created. A new parameter is now created for a goborotation function.22.12.6 Parameter 6: gobo rotationwww.adblighting.comPage:577Issue 1.01