12.07.2015 Views

SAFETY DATA SHEET NITOBOND AR - EPMS Supplies

SAFETY DATA SHEET NITOBOND AR - EPMS Supplies

SAFETY DATA SHEET NITOBOND AR - EPMS Supplies

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

REVISION DATE: 17/10/2007<strong>SAFETY</strong> <strong>DATA</strong> <strong>SHEET</strong><strong>NITOBOND</strong> <strong>AR</strong>1 IDENTIFICATION OF THE SUBSTANCE/PREP<strong>AR</strong>ATION AND OF THE COMPANY/UNDERTAKINGPRODUCT NAMEPRODUCT NO.APPLICATIONSUPPLIER<strong>NITOBOND</strong> <strong>AR</strong>0703/GB/L/4AdmixtureEMERGENCY TELEPHONE 01827 2652792 HAZ<strong>AR</strong>DS IDENTIFICATIONFosroc LimitedDrayton Manor Business ParkColeshill RoadTamworthStaffsB78 3TLTel: 01827 262222Fax: 01827 262444Not regarded as a health or environmental hazard under current legislation.3 COMPOSITION/INFORMATION ON INGREDIENTS4 FIRST-AID MEASURESINHALATIONUnlikely route of exposure as the product does not contain volatile substances.INGESTIONRinse nose, mouth and throat with water.SKIN CONTACTWash off promptly and flush contaminated skin with water. Promptly remove clothing if soaked through and flush skin with water.EYE CONTACTImmediately flush with plenty of water or eyewash solution for up to 10 minutes.5 FIRE-FIGHTING MEASURESEXTINGUISHING MEDIAThe product is non-combustible.PROTECTIVE MEASURES IN FIREUse protective equipment appropriate for surrounding materials.6 ACCIDENTAL RELEASE MEASURESPERSONAL PRECAUTIONSWear protective gloves and, in case of splashes, goggles/face shield too.ENVIRONMENTAL PRECAUTIONSDo not discharge into drains, water courses or onto the ground.SPILL CLEAN UP METHODSCollect spillage with granulates, sawdust, rags or other absorbent.7 HANDLING AND STORAGEUSAGE PRECAUTIONSAvoid spilling, skin and eye contact.1 / 3


REVISION DATE: 17/10/2007STORAGE PRECAUTIONSStore above freezing.<strong>NITOBOND</strong> <strong>AR</strong>8 EXPOSURE CONTROLS/PERSONAL PROTECTIONPROTECTIVE EQUIPMENTHAND PROTECTIONProtective gloves and goggles must be used if there is a risk of direct contact or splash.EYE PROTECTIONUse eye protection.HYGIENE MEASURESWash promptly with soap & water if skin becomes contaminated.9 PHYSICAL AND CHEMICAL PROPERTIESAPPE<strong>AR</strong>ANCEODOURSOLUBILITYLiquidAlmost odourlessSoluble in water.BOILING POINT (°C) 100 c MELTING POINT (°C) 0cRELATIVE DENSITY 1.1010 STABILITY AND REACTIVITYSTABILITYStable under normal temperature conditions and recommended use.CONDITIONS TO AVOIDAvoid frost. Avoid contact with oxidisers or reducing agents.HAZ<strong>AR</strong>DOUS DECOMPOSITION PRODUCTSNone under normal conditions.11 TOXICOLOGICAL INFORMATIONINHALATIONUnlikely to be hazardous by inhalation because of the low vapour pressure of the substance at ambient temperature.INGESTIONNo harmful effects expected in amounts likely to be ingested by accident.SKIN CONTACTRepeated exposure may cause skin dryness or cracking.EYE CONTACTMay cause temporary eye irritation.12 ECOLOGICAL INFORMATIONMOBILITYMobile.DEGRADABILITYThe product is expected to be biodegradable.13 DISPOSAL CONSIDERATIONSGENERAL INFORMATIONWaste to be treated as controlled waste. Disposal to licensed waste disposal site in accordance with local Waste Disposal Authority.2 / 3


REVISION DATE: 17/10/2007<strong>NITOBOND</strong> <strong>AR</strong>14 TRANSPORT INFORMATION15 REGULATORY INFORMATIONRISK PHRASESNCNot classified.<strong>SAFETY</strong> PHRASESS26In case of contact with eyes, rinse immediately with plenty of water and seek medicaladvice.S24/25 Avoid contact with skin and eyes.16 OTHER INFORMATIONREVISION DATE 17/10/2007REV. NO./REPL. SDS GENERATED 1DISCLAIMERThis information relates only to the specific material designated and may not be valid for such material used in combinationwith any other materials or in any process. Such information is, to the best of the company's knowledge and belief, accurateand reliable as of the date indicated. However, no warranty guarantee or representation is made to its accuracy, reliability orcompleteness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.3 / 3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!