Hydrometer Sharky 773 Ultrasonic Compact Energy ... - hsa-asia.com

DATASHEET ultrasonic compact energy metermodel 773Meter configuration for SHARKY (model 773)applicationenergy meter for heatingenergy meter for coolingenergy meter for combined heating / coolingPlease mark your itemnominal flow0.6 m/h / 110mm thread / DN 15 / GB0.6 m/h / 130mm thread / DN 20 / G1B0.6 m/h / 190mm thread / DN 20 / G1B0.6 m/h / 190mm flange / DN 201.0 m/h / 110mm thread / DN 15 / GB1.0 m/h / 130mm thread / DN 20 / G1B1.0 m/h / 190mm thread / DN 20 / G1B1.0 m/h / 190mm flange / DN 201.5 m/h / 110mm thread / DN 15 / GB1.5 m/h / 130mm thread / DN 20 / G1B1.5 m/h / 190mm thread / DN 20 / G1B1.5 m/h / 190mm flange / DN 202.5 m/h / 130mm thread / DN 20 / G1B2.5 m/h / 190mm thread / DN 20 / G1B2.5 m/h / 190mm flange / DN 203.5 m/h / 260mm thread / DN 25 / G1B3.5 m/h / 260mm flange / DN 253.5 m/h / 260mm flange / DN 326 m/h / 260mm thread / DN 25 / G1B6 m/h / 260mm flange / DN 256 m/h / 260mm flange / DN 3210 m/h / 300mm thread / DN 40 / G2B10 m/h / 300mm flange / DN 4015 m/h / 270mm flange / DN 5025 m/h / 300mm flange / DN 65pressurePN16 (only thread)PN25installationsupply (forward)return (standard)verificationwithout type approval markwith EN approvalwith EN approval and verification (if feasible)with MID approval mark (with declaration of conformity)with MID approval mark (without declaration of conformity)cable between calculator and flow sensor0.2 m cable1.5 m cable (standard)3 m cable5 m cable (only for qp 0.6m/h up to 2.5m/h)power supplybattery 3.0V DC (C-cell) 12 year lifetime (standard)battery 3.6V DC (D-cell) 16 year lifetimemains unit 230V ACmains unit 24V ACinterface modulesmodules slot 1without module (standard)M-Bus moduleRS-232 moduleReal Data radio modulepulse input module (2 inputs)modules slot 2without module (standard)pulse output module (2 outputs)pulse input module (2 inputs)combined module (2 inputs / 1 output)(standard setting for pulse input modules: 100l/pulse(standard setting for pulse output modules: energyand volume, pulse value is the last digit in thecorresponding display)energy unitkWh (without digit after comma)MWh (with 3 digit after comma)MWh (with 2 digit after comma)GJ (with 3 digit after comma)GJ (with 2 digit after comma)Gcal (with 3 digit after comma)Gcal (with 2 digit after comma)MBtu (with 3 digit after comma)(units with other digits after comma on request)temperature sensors (pair)without sensorsPt 500 / direct sensor (Ø 3.3 mm)Pt 100 / 2 m cable (standard)Pt 500 / 2 m cablePt 500 / 3 m cablePt 500 / 5 m cablePt 500 / 10 m cablePt 500 / 20 m cable (just for Ø 6.0 mm with EN approval)(standard: with EN-approval)diameter temperature sensors5.2 mm (standard)6.0 mmdirect sensor (Ø 3.3 mm)temperature sensor mountingone sensor mounted in the flow part (only for direct sensoror sensors with Ø 5.2 mm) standard for sizes qp 2.5m/hindirect mounting (2 free sensors)standard for sizes qp 3.5m/hpockets (pair)withoutfor 5.2 mm temperature sensors (standard)brass-pockets, 34 mmbrass-pockets, 50 mmbrass-pockets, 70 mmbrass-pockets, 85 mmbrass-pockets, 120 mmfor 6 mm temperature sensorsbrass-pockets, 40 mmbrass-pockets, 85 mmbrass-pockets, 120 mmstainless steel-pockets, 85 mmstainless steel-pockets, 120 mmstainless steel-pockets, 155 mmstainless steel-pockets, 210 mmquantity:company name:contact person HYDROMETER:country approval:miscellaneous:piecesPlease complete this configuration sheet and return it.HYDROMETER GmbH Postfach 1462, 91505 Ansbachdelivery adress: Industriestrasse 13, 91522 Ansbachwww. Hydrometer.de Tel. +49 (0)981 / 1806-0 Fax: +49 (0)981 / 1806-605 and -615meter configuration 773_e new.xlsMPHB