W211 Rear Bumper Strip Removal.pdf

AR88.80-P-2220TA Remove/install bumper protective strip 19.4.06MODEL 211.0 up to 31.5.06Rear bumper1 Left outer protective strip2 Right outer protective strip3 Center protective strip4 Rear bumper5 Electrical connectors (with code (220)Parktronic system (PTS))6 Catch hookP88.80-2036-06e dRemove/install1 Mask rear bumper (4) in area of protectivestrips (1, 2, 3) with adhesive tapei To avoid paint damage.2 Unclip left outer protective strip (1) or right i Start from bumper center to outside.outer protective strip (2) on catch hooks (6,arrows) from rear bumper (4) with long wedge.l *1155890359003 Unclip center protective strip (3) from rearbumper (4) with long wedge4.1 Disconnect electrical connectors (5) fromParktronic system sensors (PTS) and removecenter protective strip (3)i If only center protective strip (3) is to beremoved, it is necessary to remove the leftouter protective strip (1) or the right outerprotective strip (2). Unclip inner catch hooks(6) from remaining left outer protective strip(1) or right outer protective strip (2) from rearbumper (4) and lift left outer protective strip(1) or right outer protective strip (2) untilcenter protective strip (3) can be removed.l *115589035900On vehicles with code (220) Parktronicsystem (PTS)i When replacing center protective strip (3)do not disconnect electricalconnectors (5).5.1 Remove Parktronic system sensors (PTS) On vehicles with code (220) Parktronicsystem (PTS)i When replacing center protective strip (3),unclip Parktronic system sensors (PTS) fromcenter protective strip (3) with bracket6 Install in the reverse orderAR54.65-P-0002T

115 589 03 59 00Long wedge