2nd Edition 2nd Edition - Aspen Electronics

Microwave Antenna Alignment Test Set2200 / 2240 Path Align-R TM• Designed for Alignment of Microwave LinkAntennas Without the Need for Link Transceivers.• Tunable Bands from 1.8 ~ 23.5GHz.• Reduces Time to Complete Installation.• Continuous Talk & Listen Over Link Via IncludedHeadsets.• Path Loss Display Updated Every 300ms.22402200TransmitterTransmissionTransmitter Output PowerTransmitter StabilityTunable Frequency BandsFull-Duplex0dBm, Nominal5.1 x 10E -9 /day (aging) + 1 x 10E -6 (temp 0°C ~ 50°C)Model Numbers Ending in A Must Be Ordered With AtLeast One Frequency OptionOption 01 – Band 1 (Res. 1.0MHz)Option 02 – Band 2 (Res. 1.0MHz)Option 03 – Band 3 (Res. 1.0MHz)Option 04 – Band 4 (Res. 1.0MHz)1.8 ~ 2.5GHz5.8 ~ 6.6GHz11.0 ~ 12.0GHz18.1 ~ 19.4GHz1.8 ~ 2.5GHz3.5 ~ 5.0GHz& 5.8 ~ 6.6GHz7.4 ~ 10.0GHz& 11.0 ~ 12.0GHz18.1 ~ 19.4GHz& 22.0 ~ 23.5GHzReceiverGeneralDeviationTransmit / Receive OffsetModulationModulation Input / OutputReceiver SensitivityReceiver BandwidthReceiver Overload PointReceiver ReadoutExternal ReadoutVariable Alignment ToneInternal Speaker OutputEarpiece OutputSpeaker/Earpiece ControlPowerDimensionsWeight50 ~ 100kHz39MHzFM VoiceHandset W/10-foot Coiled Cord, Terminated in a 3.5mmPlug (Mic. & Earpiece)-100dBm Nominal (1.8 ~ 2.5GHz); -95dBm Nominal(3.5 ~ 6.6GHz); -90dBm Nominal (7.5 ~ 12.0GHz); -90dBmNominal (18.1 ~ 23.5GHz)100kHz, Nominal-30dBm (Damage Level: +10dBm)LCD Direct Path Loss in dB (Equivalent to Signal InputLevel in dBm), 0.1dB Resolution, Updated Every 300msExternal Readout of Path Loss with DVM (0 ~ 2 VDC),BNC Connector, Rear Panel600Hz ~ 6kHz, Varies with Signal Strength, SwitchSelectable350mW Max., Variable, Behind Front Panel250mW Max., Variable, 3.5mm Front Panel JackVariableSelf Contained 12V, 2.3Ah Rechargeable SealedLead-Acid Battery89mm (H) x 213mm (W) x 333mm (D)3.2kgORDERING INFORMATION22002200A22402240AOption 320Option 325Option 330Option 331Option 333Option 324Path Align-R with All Bands as Standard.Path Align-R where Desired Band must be Added.Extended Range Path Align-R with All Bands as Standard.Extended Range Path Align-R where Desired Band must be Added.Spare Battery.Adaptor – In-Line (SMA (F) to N (M).Adaptor – Waveguide to Coax N (F) CPR 137.Adaptor – Waveguide to Coax N (F) CPR 90.Adaptor – Waveguide to Coax SMA (F) CPR 42.Cable; Coax Cable Assembly SMA (M) ~ SMA (M).44Tel: +44 (0)20 8868 1311 Fax: +44 (0)20 8866 65961-3 Kildare Close, Eastcote, Ruislip, Middlesex HA4 9UR