2nd Edition 2nd Edition - Aspen Electronics

Terminating Power SensorModel 5011 & 5011EF• Significant Cost & Time Savings, Easy to Use& Field Ready.• Both Digital as well as Analogue ModulationsIncluding (CDMA, GSM, TDMA, 8-VSB & COFDM).• Broadcast Transmitter Power with Accuracy of±5% of Readings.• Measure Power Directly or Via Coupled Test Port.5011EF5011Sensor TypeTerminating Power Sensor, Terminated Average Power MeasurementFrequency Range40MHz ~ 4GHz40MHz ~ 12GHzPower Range-20 ~ +10dBm (10µW ~ 10mW)Peak/Average Ratio12dB MaximumAccuracy±5% of Reading ±1mW RSS (Excluding Mismatch Uncertainty)Warm Up Time5 MinutesInput Impedance50Ω NominalInput VSWRTypical 1.03 (36.6dB Return Loss);Maximum 1.20 (20.8dB Return Loss)Typical 1.05 (32.3dB Return Loss);Maximum 1.25 (19.1dB Return Loss)Input ConnectorPrecision N MaleOutput ConnectorMale DB-9 to Interface to Digital Power Meter or Site AnalyserPower SupplyFrom Host Instrument Via Cable ConnectionOperating Temperature-10°C ~ 50°CStorage Temperature-40°C ~ 80°CHumidity95% Maximum (Non Condensing)AltitudeUp to 15,000 FeetSize6” Long (Including Connectors); 1.5” DiameterWeight340g66Tel: +44 (0)20 8868 1311 Fax: +44 (0)20 8866 65961-3 Kildare Close, Eastcote, Ruislip, Middlesex HA4 9UR