2nd Edition 2nd Edition - Aspen Electronics

COMMON SPECIFICATIONSCommonRemote Analogue ProgrammingProgramming AccuracyRemote Analogue MonitoringOver Voltage ProtectionDigital ProgrammingDigital Programming &Readback ResolutionModulationAdditional Output PowerDimensionsWeightVoltage, Current (0 ~ 100%) and OVP (5 ~ 110%) can beProgrammed by Selectable 0 ~ 5V, 0 ~ 10V or 0 ~ 5kΩVoltage: ±0.25% of Full Scale OutputCurrent: ±0.8% of Full Scale OutputVoltage & Current can be Monitored with 0 ~ 10V OutputsCorresponding to 0 ~ 100%Programming Range: 5 ~ 100% Settable from Front Panel,Remote Analogue or via Optional Digital InputsSGI: RS-232 - Standard, GPIB/Ethernet - OptionalSGA: RS-232 & GPIB/Ethernet - OptionalVoltage: ± 0.1% of Full Scale OutputCurrent: ± 0.4% of Full Scale Output± 0.002% of Full Scale OutputAnalogue Input is Summed with the Digital Programming Signal toAllow Modulation of the Output Voltage and Current SettingsUp to 5 units May be Paralleled for Additional Current.Paralleling Cable Required.5 ~ 15kW Units: 133.4mm (H) x 483mm (W) x 635mm (D)20 ~ 30kW Units: 266.7mm (H) x 483mm (W) x 635mm (D)5 ~ 15kW Units: 36kg, 20 ~ 30kW Units: 73kgSGA/SGI COMPARISON CHARTModular DesignFast Load TransientParallelableAnalogue & Digital SummingDirect Front Panel V/I Control3½ Digit LED ReadoutGraphics DisplaySequencingSave/Recall SetupsSystem Power ReadoutsConstant Power ModeIEEE-488.2/RS-232CEthernet/RS-232CSGAYYYOptionalYYN/AN/AN/AN/AN/AOptionalOptionalSGIYYYYYYYYYYRS-232C StandardIEEE.488.2 OptionalRS-232C StandardEthernet OptionalORDERING INFORMATIONSG ModelOption AOption IOption COption DOption EOption 1AOption 1COption 1DOption 1EOption 2AOption 2GSelect Model from the Previous Table with Desired Voltage & Current Output.Analogue Control.Intelligent Control.187 ~ 242Vac, Three Phase.342 ~ 440Vac, Three Phase (Standard).396 ~ 528Vac, Three Phase.GPIB & RS-232 (RS-232 Standard with SGI).Ethernet & RS-232 (RS-232 Standard with SGI).Isolated Analogue Programming Control of V/I/OVP and ISOLATED V/I Monitor Outputs.Shaft Locks (SGA only).Combine both Options 1A & 1D.Combine both Options 1C & 1D.76Tel: +44 (0)20 8868 1311 Fax: +44 (0)20 8866 65961-3 Kildare Close, Eastcote, Ruislip, Middlesex HA4 9UR