Radi C ntr lled - Radio Controlled Soaring Digest

models that need some reconstructive
surgery before the weekend... And the
trusty old Zagi is still naked after I had
stripped it of its tattered pajamas.
Putting the tailfeathers together is
straight forward and the only deviation
from the plans was to add the balsa
triangle stock to keep everything square
and give the glue more surface area to
take on. See the photo directly below.
The formers have been glued in here and
the fuselage sides pulled in. Masking
tape holds everything in place while the
contact glue takes time to take hold. See
the photo to the right. I still found the
ends of the correx was lifting afterwards
and tacked them in place with cyano.
52
R/C Soaring Digest