FC HBA Driver for Mac OS X Release Notes - QLogic

3. Bug FixesThe following bug fixes have been made to the FC HBA Driver for Mac OS X between versions 2.00.02 and2.00.03. See revision.notes for details.● Changed the call to TaskWithOptions such that minimum memory allocation size is PAGE_SIZE.● Used firmware calculated residual length for 4Gb HBA.[ER56525/ER51903]● Restricted Port Login retries.● Fixed all DEBUG message compile time errors.● Fixed panic in IOCTL path by increasing timeout value.[ER56525/ER51903]● Returned data in MBytes instead of Bytes for getting Statistics.● Modified License file time span to include 2007.● Corrected endianess issue while interrogating MS status.● Honored 4Gb HBA NVRAM settings for LIP reset, full login LIP, and corrected "LIP Followed by Login"mailbox command issuance.● Corrected endianess comparisons during 4Gb HBA NVRAM configuration.● Fixed problem so the driver doesn't wait for loop transition to complete if loop is dead.● Added patch for "HBA registers not being mapped to IO or Memory space.● Fixed STOP FIRMWARE issue by adding IOSCSIPCI interrupt enable statement.● Fixed Register Mailbox Test issue.● Fixed SendRLS by using get_link_status instead of MS IOCB.● Corrected issue where driver improperly issued SNS commands in N2N topologies.● Honored 'skip process-login' option during fabric-login IOCB.● Resynchronized with latest released 4Gb HBA firmware: 4.00.26.● Corrected large-buffer transfer issues during loopback test.● Performed implicit LOGO during fabric logout request.4. Known IssuesNone5. HistoryFor a complete history, see the revision notes provided in the software package.6. Additional InformationNone7. Firmware (Embedded in Driver)This section provides release details for the firmware embedded in the driver.7.1 2Gb HBAsThe following table shows the changes and bug fixes made to the ISP23xx Risc firmware between versions3.03.18 and 3.03.19.ChangesChangeDescriptionFrom 3.03.18 to 3.03.19[ER43794] Firmware initiated login to Fabric Name Server is now retried if there is a timeout.[ER44240]ISP2322 only. Modify auto speed negotiation to inter-operate with certain switches.FC HBA Driver for Mac OS X Release Notes 2 of 3

Bug FixesError ReportFrom 3.03.18 to 3.03.19Description[ER43740][ER44251][ER43950][ER44307][ER43736][ER43721][ER43703]Correctly set the Hard ID Valid bit in the Port Database structure.ISP2322 only. Corrected a condition that could result in IOCB’s not being returned in a private loop topology. This could happenif the target port repeatedly sends immediate CLS in response to OPN, and the firmware retry limit is reached.Corrected potential hang condition during Unload IP (0079h) mailbox command.Corrected a condition that could cause a CTIO to be incorrectly returned with Port Unavailable (28h) status.ISP2322 only. Corrected a condition that could unnecessary LIPs to be initiated by the ISP.Corrected a condition that could prevent the firmware from going to READY state after a configuration change.ISP2322 only. Corrected false underrun status reported for some IOCB’s after timeout of another unrelated IOCB.7.2 4Gb HBAsThe following tables show the changes and bug fixes to the ISP24xx for version 4.00.26.ChangesChange4.00.26Initial release.DescriptionBug FixesError Report4.00.26Initial release.Description8. TrademarksQLogic, the QLogic logo, QLA, SANbox, and SANsurfer are registered trademarks of QLogic Corporation.SANtrack and SAN Express are trademarks of QLogic Corporation.All other brand and product names are trademarks or registered trademarks of their respective owners.9. NoticesInformation furnished in this document is believed to be accurate and reliable. However, QLogicCorporation assumes no responsibility for its use, nor for any infringements of patents or other rights ofthird parties which may result from its use. QLogic Corporation reserves the right to change productspecifications at any time without notice. Applications described in this document for any of these productsare only for illustrative purposes. QLogic Corporation makes no representation nor warranty that suchapplications are suitable for the specified use without further testing or modification. QLogic Corporationassumes no responsibility for any errors that may appear in this document.10. Contacting SupportPlease feel free to contact your QLogic approved reseller or QLogic Technical Support at any phase ofintegration for assistance. QLogic Technical Support can be reached by the following methods:Web: http://support.qlogic.comNorth America Contact InformationEmail: support@qlogic.comPhone: (952) 932-4040Support contact information for other regions of the world is available at the QLogic website:http://support.qlogic.comGo to Top© Copyright 2008. All rights reserved worldwide. QLogic, the QLogic logo, and the Powered by QLogic logo areregistered trademarks of QLogic Corporation. All other brand and product names are trademarks or registeredtrademarks of their respective owners.FC HBA Driver for Mac OS X Release Notes 3 of 3