Technical Integration Guide - Afnic

TECHNICAL INTEGRATION GUIDE – February 25th, 2013 99• 2190 : Return code similar to 2106 but in the case of a command. (Code added by ourselves and not defined in the EPPstandard.• 2200 : Code returned during a login/password verification during theEPP server connection phase.• 2201 : Code returned when a command is being executed by a registrarwith no rights. For instance, a registrar that would try to send a "cancel"command on a outgoing domain name following a transfer operation.• 2202 : Code returned when the registrar requesting the command couldhave done so if he had given the correct authorizations. Typically, thiscode will be used during a transfer request when the password() is invalid.• 2300 : Code returned when a domain transfer command is sent and thedomain is alreay undergoing a transfer.• 2304 : Code returned when the status of an object is not compatible withthe command sent to the server. For instance, in case a technical updatecommand is sent for a deleted domain name under redemption.• 2305 : Code returned when a command cannot be executed becauserelations with other objects in the database are blocking. For instance,during a domain deletion request when some name servers are still beingused with this zone on other domain names managed by AFNIC.• 2306 : Code returned when the value of an element respects the EPPsyntax but does not respect a specific AFNIC rule. Most of the time thiserror will indicate the problematic element but also a message indicatingwhich rule was not respected. It is possible that this error messageshould not be present, as this code is being used as a value by default.The case where this code could be returned, for instance, is when anindividual contact with civil status data (a potential domain holder) willbe used as a technical contact during a command.• 2390 : This code is returned during a command when used on adomain name already undergoing a transmission.• 2391 : This code is returned when a cancel command or a information request is sent when there is no ongoing on this domain name.• 2400 : Code returned when an internal problem prevents a commandfrom being successfully completed. Normally this code should not bereturned often, its presence indicates there are some problems on ourregistration chain. In any case, it is wise to inform the AFNIC supportteam in case you find this error code.• 2500 : Code returned in a similar case to the 2400 code. In this case theserver decides to end the session. This case should not occur often.• 2501 : This code is returned if the phase cannot be completed.• 2502 : This code will be returned if, in the case the number of sessionsper registrar would be limited, that the limit has been reached when anew command is sent.Association Française pour le Nommage Internet en Coopération | www.afnic.fr | contact@afnic.frTwitter : @AFNIC | Facebook : afnic.frTechnical Integration Guide- 99 -November 2009