Operating Instructions - VEGACAP 67 with two-wire output - Insatech

More documents

Recommendations

Info

For your safety2.6 Safety information for Ex areasPlease note the Ex-specific safety information for installationand operation in Ex areas. These safety instructions are part ofthe operating instructions manual and come with the Exapprovedinstruments.2.7 Manufacturer declarationIn conformity with DIN EN 60079-14/2004, para. 5.2.3, pointc1, the capacitive probe VEGACAP 67 is suitable for use inzone 2.The operator must use the instrument correctly and follow thespecifications of the following documents:l this operating instructions manuall this manufacturer declaration (24645)l the applicable installation regulationsMax. increase of the surface temperature during operation:40 K (individual components in the instrument)With an ambient temperature of +70°C (+158°F) on thehousing and a process temperature of +70°C (+158°F), themax. ambient temperature during operation is +110°C(+230°F).Measures to maintain the explosion protection during operation:llllllOperate you instrument in the range of the specifiedelectrical limit values. Permissible supply voltage: see"Technical data"Mount and operate the instrument in such a way that noignition danger is expected by electrostatic charges. Theprocess fitting, the plastic-coated/covered probe part or thehousing are made of electrically non-conductive plastic(depending on the version).Make sure that the seal is mounted correctly betweenlower part of the housing and cover. Screw the cover ontightly.Make sure that there is no explosive atmosphere, if youwant to operate the instrument with open coverMake sure that the cable gland is tight and strain-relieved.The outer diameter of the connection cable must beadapted to the cable gland. Tighten the pressure screw ofthe cable gland carefully.Cover unused openings for cable glands tightly6 VEGACAP 67 - with two-wire output31317-EN-060223
For your safetyl Mount the instrument in such a position that the sensorcannot touch the vessel wall or vessel installations. Keepthe influences of product movements in the vessel in mind.l The surface temperature on the housing must not exceedthe ignition temperature of the concerned explosiveatmosphereThis instrument was judged by a person that fulfils therequirements acc. to DIN EN 60079-14.2.8 Environmental instructionsProtection of the environment is one of our most importantduties. That is why we have introduced an environmentmanagement system with the goal of continuously improvingcompany environmental protection. The environment managementsystem is certified acc. to DIN EN ISO 14001.Please help us fulfil this obligation by observing the environmentalinstructions in this manual:llChapter "Storage and transport"Chapter "Disposal"31317-EN-060223VEGACAP 67 - with two-wire output 7
Page 3: Contents8 Dismounting8.1 Dismountin
Page 8 and 9: Product description3 Product descri
Page 10 and 11: Product descriptionTypical applicat
Page 13 and 14: Mounting4.2 Mounting informationAgi
Page 15 and 16: d6dMounting123Fig. 6: Filling in th
Page 17 and 18: Connecting to power supply3 Remove
Page 19 and 20: Connecting to power supplyThe wirin
Page 21 and 22: Set up6 Set up6.1 GeneralThe number
Page 23 and 24: Maintenance and fault rectification
Page 25 and 26: Maintenance and fault rectification
Page 27 and 28: Dismounting8 Dismounting8.1 Dismoun
Page 29 and 30: SupplementOutput variableOutputTwo-
Page 31 and 32: SupplementSupply voltageSupply volt
Page 33 and 34: SupplementSW46242mm(9 17/32")ø 38m
Page 35 and 36: Supplement31317-EN-060223VEGACAP 67

Operating Instructions - VEGACAP 67 with two-wire output - Insatech

Create successful ePaper yourself

Delete template?

Save as template?