View User Manual - Life Fitness

CREATE YOUR OWN (DEFAULT: ENABLED)The manager can enable or disable the Create Your Own workout feature.PROGRAM TIMEOUT (DEFAULT: 60 SECONDS)Sets the amount of time the user can go without touching the Touchscreen while setting up their workout, before theconsole resets back to the Home Screen. Program Timeout is set to 60 seconds.FIT TEST (DEFAULT: ENABLED)Choose OFF to disable the Life Fitness Fit Test.MARATHON MODE (DEFAULT: ENABLED)Marathon Mode has no preset or settable goal. It allows the user to workout indefinitely. If enabled, a workout inMarathon Mode ends only if the user chooses to end it.SYSTEM BEEPS (DEFAULT: ON)The System Beeps Configuration allows the manager to disable the beeping sound.PAUSE TIME (DEFAULT: ONE MINUTE)Managers can adjust the Pause Time from 1 to 99 minutes. The value is only used when the optional External PowerSupply is plugged in.TELEMETRY (DEFAULT: ENABLED)The telemetry feature makes it possible to use the Polar®-compatible Heart Rate Zone Training exercise chest strap formonitoring the heart rate.VIRTUAL TRAINER (DEFAULT: ON)The Virtual Trainer feature makes it possible for a male or female face to appear on the integrated LCD screen andadvise the user on every aspect of the workout.NETWORK (DEFAULT: VIVO)Managers can select from the following options: Vivo, Other (network), and None.AUDIO CUES MANAGER CONFIGURATIONThe Audio Cues Manager Configuration allows the manager to enable or disable the Audio Cues feature.3) TOUCH SCREEN CONFIGURATIONFollow the instructions on the screen to recalibrate the Touch Screen. If calibration was successful, a prompt will appearalong with a 30 second countdown. Touch the screen anywhere to save the calibration data. If calibration was unsuccessful,a “+” will appear in the center of the screen and the calibration will have to be redone. Contact Life Fitness ifrepeated attempts at calibration were unsuccessful (see page 1 for contact information).4) EXPORT/IMPORT SETTINGSBrings up the Export / Import Settings screen which is used to import or export manager and manufacturer configurablesettings. This can be advantageous when many or all optional features are enabled and configured.To Import or Export Settings: Insert a USB stick into the USB port. Enter the Import/Export Settings through theConfiguration Menu. Select “Import Settings to USB” or “Export Settings To USB”. Upon notification, remove theUSB stick from the USB port.NOTE: Exported setting information is product specific. Bike settings can only be imported into other, same model bikes.Bike settings cannot be used to update settings of any other product.37