Download PDF

Quality SystemISO9001 CertifiedEnvironmentalManagement SystemISO14001 CertifiedU.S. Patent #5,851,109; 5,996,627;400,210; 6,241,487Other U.S. PatentsApplied forM07 Non-MetallicBall ValveDesign Level 1Air OperatedDouble Diaphragm PumpENGINEERING, PERFORMANCE& CONSTRUCTION DATAINTAKE/DISCHARGE PIPE SIZEInternal Threads ¾" NPT or ¾" BSP TaperedExternal Threads 1½" NPT or1½” BSP TaperedCAPACITY0 to 23 US gallons per minute(0 to 87 liters per minute)AIR VALVENo-lube, no-stalldesignSOLIDS-HANDLINGBall Valve S07B Models - Up to .15 in.(4mm)Trihedral Valve S07T Models - Up tp .36in(9.1mm) Diameter or .16in 2 area (10.3cm 2 )HEADS UP TO100 psi or 231 ft. of water(7 bar or 70 meters)DISPLACEMENT/STROKE.026 US gallon / .098 literCAUTION! Operating temperature limitations are as follows:Operating TemperaturesMaterials Maximum MinimumSantoprene ® : Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion 275°F -40°Fresistance. 135°C -40°CVirgin PTFE: Chemically inert, virtually impervious. Very few chemicals are known to react chemically with PTFE: molten alkali metals,turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily 220°F -35°Fliberate free fluorine at elevated temperatures. 104°C -37°CPVDF: 250°F 0°F121°C -18°CPolypropylene: 180°F 32°F82°C 0°CNitrile: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used 190°F -10°Fwith highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons. 88°C -23°CFKM (Fluorocarbon): Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated 350°F -40°Fhydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 70°F) will attack FKM. 177°C -40°CNylon:For specific applications, always consult the Warren Rupp “Chemical Resistance Chart”180°F82°C32°F0°CCAUTION: Nonmetallic pumps and plastic components are not UV stabilized. Ultraviolet radiation can damage these parts and negatively affect material properties.Do not expose to UV light for extended periods of time.Marathon ® pumps are designed to be powered only by compressed air.m07nmdl1sm-rev0513 Models M07 Non-Metallic Page 1