Verdiem Surveyor 6 Administrator Guide

Verdiem Surveyor 6 Administrator GuideConfigure Windows Firewall to allow web components toaccess the serverIf you use Surveyor components that access the server through http, and Windows Firewallis enabled on the server, make sure TCP port 80 is added to the exceptions list.You would need to access the server through http if you do any of the following:• Enable Wake for Remote Access for your end users to wake their computers from homeor another off-site location.Wake for Remote Access is an add-on component that comes with Surveyor. Forinformation see the Wake for Remote Access Guide.• Administer the server from a remote computer; for example, as you would if you set updelegated administration.1. On the server computer, navigate to Windows Start menu / Control Panel / WindowsFirewall.2. On the Exceptions tab, click Add Port.3. In the Add a Port dialog box, do the following:a) Type a name that indicates that the exception is for power management components.(This name appears in the exceptions list.)b) Specify port 80.c) Select TCP.4. Click OK, and then click OK in the Windows Firewall dialog box.For additional information, refer to the Microsoft TechNet topic Add a Port to the FirewallRules List.Security and permissions in the Surveyor deployment43