dtc b1140/32 side airbag sensor assy (rh) - Highlander Club
dtc b1140/32 side airbag sensor assy (rh) - Highlander Club
dtc b1140/32 side airbag sensor assy (rh) - Highlander Club
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
DIAGNOSTICS-SUPPLEMENTAL RESTRAINT SYSTEM05-1<strong>32</strong>3INSPECTION PROCEDURE1 CHECK DTCCGH01012H10600H01065SideAirbagSensorAssy RHDLC3TCAirbagSensorAssyCenterDTC B1140/<strong>32</strong>H40442(a) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(b) Clear the DTCs stored in memory (see page 05-1215 ).(c) Turn the ignition switch to the LOCK position.(d) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(e) Check the DTCs (see page 05-1215 ).OK:DTC B1140/<strong>32</strong> is not output.HINT:Codes other than code B1140/<strong>32</strong> may be output at this time, butthey are not related to this check.NG Go to step 2OKUSE SIMULATION METHOD TO CHECK2 CHECK CONNECTION OF CONNECTORS(a)(b)(c)Turn the ignition switch to the LOCK position.Disconnect the negative (-) terminal cable from the battery, and wait at least for 90 seconds.Check that the connector is properly connected to the <strong>airbag</strong> <strong>sensor</strong> <strong>assy</strong> center and the <strong>side</strong> <strong>airbag</strong><strong>sensor</strong> <strong>assy</strong> RH.NGCONNECT CONNECTORS, THEN GO TO STEP1OK2005 HIGHLANDER REPAIR MANUAL (RM1144U)Author:Date:1513
05-1<strong>32</strong>6DIAGNOSTICS-SUPPLEMENTAL RESTRAINT SYSTEM7 CHECK SIDE AIR BAG SENSOR ASSY RHCGSideAirbagSensorAssy LHDLC3TCH01012H10600H01065H01066AirbagSensorAssyCenterDTC B1140/<strong>32</strong>DTC B1141/33H42115(a) Connect the connector to the <strong>airbag</strong> <strong>sensor</strong> <strong>assy</strong> center.(b) Interchange the <strong>side</strong> <strong>airbag</strong> <strong>sensor</strong> <strong>assy</strong> RH with LH andconnect the connectors to them.(c) Connect the negative (-) terminal cable to the battery,and wait for at least 2 seconds.(d) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(e) Clear the DTCs stored in memory (see page 05-1215 ).(f) Turn the ignition switch to the LOCK position.(g) Turn the ignition switch to the ON position, and wait for atleast 60 seconds.(h) Check the DTCs (see page 05-1215 ).Result:NG: ANG: BOKDTC B1140/<strong>32</strong> is output.DTC B1141/33 is output.DTC B1140/<strong>32</strong> and B1141/33 are notoutput.NG:ANG:BREPLACE AIR BAG SENSOR ASSY CENTER(SEE PAGE 60-53 )REPLACE SIDE AIR BAG SENSOR ASSY RH(SEE PAGE 60-57 )OKUSE SIMULATION METHOD TO CHECK2005 HIGHLANDER REPAIR MANUAL (RM1144U)Author:Date:1516
Change language