v.S1 Cylindrical Lock Installation Instructions 1.10 - Access Control ...
v.S1 Cylindrical Lock Installation Instructions 1.10 - Access Control ...
v.S1 Cylindrical Lock Installation Instructions 1.10 - Access Control ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Profile Series v.<strong>S1</strong> PoE <strong>Cylindrical</strong> <strong>Lock</strong><strong>Installation</strong> Wiring (Continued)CPoE Door HarnessOrder of installation may vary. Refer to appropriate sections for instructions.1. Prop door open.2. Tape the two lock-side 4-pin connectors to the ring terminal.3. Using the ring terminal, carefully fish the assembly through the door channel to the lock.4. Remove tape from ring terminal and door harness connectors.Hinge-side harness connectors:• 4-pin male Molex connector• 6-pin male Molex connector with ground wire<strong>Lock</strong>-side harness connectors:• Ring terminal• (2) 4-pin connectors4-pin F4-PinCopyright © 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company. All rights reserved.Reproductions in whole or in part without express written permission of Sargent Manufacturing Company is prohibited.6-pin MDrain WireCable: CAT 5e,26 AWG stranded,shielded, 100ohm4-PinGroundRing Terminal Securedto <strong>Lock</strong> Mounting PlatePoE <strong>Lock</strong>02/11/116 A7763B